On Mon, Aug 05, 2013 at 08:35:09AM +0000, Zhanghaoyu (A) wrote: > >> >> >> hi all, > >> >> >> > >> >> >> I met similar problem to these, while performing live migration or > >> >> >> save-restore test on the kvm platform (qemu:1.4.0, host:suse11sp2, > >> >> >> guest:suse11sp2), running tele-communication software suite in > >> >> >> guest, > >> >> >> https://lists.gnu.org/archive/html/qemu-devel/2013-05/msg00098.html > >> >> >> http://comments.gmane.org/gmane.comp.emulators.kvm.devel/102506 > >> >> >> http://thread.gmane.org/gmane.comp.emulators.kvm.devel/100592 > >> >> >> https://bugzilla.kernel.org/show_bug.cgi?id=58771 > >> >> >> > >> >> >> After live migration or virsh restore [savefile], one process's CPU > >> >> >> utilization went up by about 30%, resulted in throughput > >> >> >> degradation of this process. > >> >> >> > >> >> >> If EPT disabled, this problem gone. > >> >> >> > >> >> >> I suspect that kvm hypervisor has business with this problem. > >> >> >> Based on above suspect, I want to find the two adjacent versions of > >> >> >> kvm-kmod which triggers this problem or not (e.g. 2.6.39, 3.0-rc1), > >> >> >> and analyze the differences between this two versions, or apply the > >> >> >> patches between this two versions by bisection method, finally find the key patches. > >> >> >> > >> >> >> Any better ideas? > >> >> >> > >> >> >> Thanks, > >> >> >> Zhang Haoyu > >> >> > > >> >> >I've attempted to duplicate this on a number of machines that are as similar to yours as I am able to get my hands on, and so far have not been able to see any performance degradation. And from what I've read in the above links, huge pages do not seem to be part of the problem. > >> >> > > >> >> >So, if you are in a position to bisect the kernel changes, that would probably be the best avenue to pursue in my opinion. > >> >> > > >> >> >Bruce > >> >> > >> >> I found the first bad > >> >> commit([612819c3c6e67bac8fceaa7cc402f13b1b63f7e4] KVM: propagate fault r/w information to gup(), allow read-only memory) which triggers this problem by git bisecting the kvm kernel (download from https://git.kernel.org/pub/scm/virt/kvm/kvm.git) changes. > >> >> > >> >> And, > >> >> git log 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4 -n 1 -p > > >> >> 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4.log > >> >> git diff > >> >> 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4~1..612819c3c6e67bac8fceaa7cc4 > >> >> 02f13b1b63f7e4 > 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4.diff > >> >> > >> >> Then, I diffed 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4.log and > >> >> 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4.diff, > >> >> came to a conclusion that all of the differences between > >> >> 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4~1 and > >> >> 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4 > >> >> are contributed by no other than 612819c3c6e67bac8fceaa7cc402f13b1b63f7e4, so this commit is the peace-breaker which directly or indirectly causes the degradation. > >> >> > >> >> Does the map_writable flag passed to mmu_set_spte() function have effect on PTE's PAT flag or increase the VMEXITs induced by that guest tried to write read-only memory? > >> >> > >> >> Thanks, > >> >> Zhang Haoyu > >> >> > >> > > >> >There should be no read-only memory maps backing guest RAM. > >> > > >> >Can you confirm map_writable = false is being passed to __direct_map? (this should not happen, for guest RAM). > >> >And if it is false, please capture the associated GFN. > >> > > >> I added below check and printk at the start of __direct_map() at the fist bad commit version, > >> --- kvm-612819c3c6e67bac8fceaa7cc402f13b1b63f7e4/arch/x86/kvm/mmu.c 2013-07-26 18:44:05.000000000 +0800 > >> +++ kvm-612819/arch/x86/kvm/mmu.c 2013-07-31 00:05:48.000000000 +0800 > >> @@ -2223,6 +2223,9 @@ static int __direct_map(struct kvm_vcpu > >> int pt_write = 0; > >> gfn_t pseudo_gfn; > >> > >> + if (!map_writable) > >> + printk(KERN_ERR "%s: %s: gfn = %llu \n", __FILE__, __func__, gfn); > >> + > >> for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) { > >> if (iterator.level == level) { > >> unsigned pte_access = ACC_ALL; > >> > >> I virsh-save the VM, and then virsh-restore it, so many GFNs were printed, you can absolutely describe it as flooding. > >> > >The flooding you see happens during migrate to file stage because of dirty > >page tracking. If you clear dmesg after virsh-save you should not see any > >flooding after virsh-restore. I just checked with latest tree, I do not. > > I made a verification again. > I virsh-save the VM, during the saving stage, I run 'dmesg', no GFN printed, maybe the switching from running stage to pause stage takes so short time, > no guest-write happens during this switching period. > After the completion of saving operation, I run 'demsg -c' to clear the buffer all the same, then I virsh-restore the VM, so many GFNs are printed by running 'dmesg', > and I also run 'tail -f /var/log/messages' during the restoring stage, so many GFNs are flooded dynamically too. > I'm sure that the flooding happens during the virsh-restore stage, not the migration stage. > Interesting, is this with upstream kernel? For me the situation is exactly the opposite. What is your command line? -- Gleb. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
