Changes since version 1 (from Sep 9):
* Split off patch 1; this is the critical prerequisite to
make the i8254 work with the fixed i8259.
* Add patch 2, to make additional changes to the i8254
to make it consistent with the spec and with proposed changes
to qemu's i8254 model.
Background:
According to the spec, the i8259 will cancel an interrupt if
the line goes low before it starts servicing it, even when
it is considered edge-triggered. This is a problem
with an old Microport UNIX guest (ca 1987), where the
guest masks off IRQ14 in the slave i8259, but the host's
master i8259 model will still try to deliver an interrupt even after
IRQ2 has been brought low, resulting in a spurious interrupt (IRQ15).
Before the i8259 can be fixed, the i8254 model needs to be fixed
so it doesn't depend on the broken i8259.
Alternative: This could be narrowly fixed for IRQ2 only with no
risk at all (and no need to touch the i8254), but if possible it
seems reasonable to fix it for all lines at the same time.
But there may be some risk:
First, I think I've convinced myself that between the i8254 and i8259,
the only substantial migration breakage should be when a
whole series of conditions are met, and the combination
should be rare enough not to worry about it. See writeup
in my qemu patch series (version 8; Dec 16).
Second, there is also the possibility that other devices are relying
on the broken model. I'm especially concerned with various users
of a function called
qemu_irq_pulse()
in the qemu source tree, which immediately lowers IRQ line after
raising it. If any of those calls are routed straight into
the i8259 (as opposed to an APIC or some other chip), then it
probably won't behave as desired.
I'll probably dig into qemu_irq_pulse() callers more carefully
eventually, but there are lot of them, and any high-level incite
anyone can provide into them would be helpful.
See the Dec 16 patch series I sent to the qemu mailing list for
more information.
http://search.gmane.org/?query=ogilvie&group=gmane.comp.emulators.qemu
Matthew Ogilvie (4):
KVM: fix i8254 IRQ0 to be normally high
KVM: additional i8254 output fixes
KVM: fix i8259 interrupt high to low transition logic
KVM: i8259: refactor pic_set_irq level logic
arch/x86/kvm/i8254.c | 50 +++++++++++++++++++++++++++++++++++++++-----------
arch/x86/kvm/i8259.c | 36 ++++++++++++++----------------------
2 files changed, 53 insertions(+), 33 deletions(-)
--
1.7.10.2.484.gcd07cc5
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
