On Fri, Oct 04, 2024 at 04:27:21PM +0100, Steven Price wrote: > This series adds support for running protected VMs using KVM under the > Arm Confidential Compute Architecture (CCA). > > The related guest support was posted[1] earlier. As with the guest this > series moves to the "v1.0-rel0" version of the specification[2]. > > Almost all changes since v4[3] are either due to rebasing or minor > changes to improve the code following review comments. There are two bug > fixes: > > * Setting the GPRS on entry after an exit where the host is allowed to > change registers is now done in kvm_rec_enter(). This fixes a bug > where register updates done by user space were being ignored. > > * Drop the PTE_SHARED bit for unprotected page table entries - this bit > isn't controlled by the host and the RMM now enforces the bit is > zero. > > Major limitations: > > * Only supports 4k host PAGE_SIZE (if PAGE_SIZE != 4k then the realm > extensions are disabled). > > * No support for huge pages when mapping the guest's pages. There is > some 'dead' code left over from before guest_mem was supported. This > is partly a current limitation of guest_memfd. > > The ABI to the RMM (the RMI) is based on RMM v1.0-rel0 specification[2]. > > This series is based on v6.12-rc1. It is also available as a git > repository: > > https://gitlab.arm.com/linux-arm/linux-cca cca-host/v5 > > Work in progress changes for kvmtool are available from the git > repository below: > > https://gitlab.arm.com/linux-arm/kvmtool-cca cca/v3 > > [1] https://lore.kernel.org/r/20241004144307.66199-1-steven.price%40arm.com > [2] https://developer.arm.com/documentation/den0137/1-0rel0/ > [3] https://lore.kernel.org/r/20240821153844.60084-1-steven.price%40arm.com > > Jean-Philippe Brucker (7): > arm64: RME: Propagate number of breakpoints and watchpoints to > userspace > arm64: RME: Set breakpoint parameters through SET_ONE_REG > arm64: RME: Initialize PMCR.N with number counter supported by RMM > arm64: RME: Propagate max SVE vector length from RMM > arm64: RME: Configure max SVE vector length for a Realm > arm64: RME: Provide register list for unfinalized RME RECs > arm64: RME: Provide accurate register list > > Joey Gouly (2): > arm64: rme: allow userspace to inject aborts > arm64: rme: support RSI_HOST_CALL > > Sean Christopherson (1): > KVM: Prepare for handling only shared mappings in mmu_notifier events > > Steven Price (29): > arm64: RME: Handle Granule Protection Faults (GPFs) > arm64: RME: Add SMC definitions for calling the RMM > arm64: RME: Add wrappers for RMI calls > arm64: RME: Check for RME support at KVM init > arm64: RME: Define the user ABI > arm64: RME: ioctls to create and configure realms > arm64: kvm: Allow passing machine type in KVM creation > arm64: RME: Keep a spare page delegated to the RMM > arm64: RME: RTT tear down > arm64: RME: Allocate/free RECs to match vCPUs > arm64: RME: Support for the VGIC in realms > KVM: arm64: Support timers in realm RECs > arm64: RME: Allow VMM to set RIPAS > arm64: RME: Handle realm enter/exit > KVM: arm64: Handle realm MMIO emulation > arm64: RME: Allow populating initial contents > arm64: RME: Runtime faulting of memory > KVM: arm64: Handle realm VCPU load > KVM: arm64: Validate register access for a Realm VM > KVM: arm64: Handle Realm PSCI requests > KVM: arm64: WARN on injected undef exceptions > arm64: Don't expose stolen time for realm guests > arm64: RME: Always use 4k pages for realms > arm64: rme: Prevent Device mappings for Realms > arm_pmu: Provide a mechanism for disabling the physical IRQ > arm64: rme: Enable PMU support with a realm guest > kvm: rme: Hide KVM_CAP_READONLY_MEM for realm guests > arm64: kvm: Expose support for private memory > KVM: arm64: Allow activating realms > > Suzuki K Poulose (4): > kvm: arm64: pgtable: Track the number of pages in the entry level > kvm: arm64: Include kvm_emulate.h in kvm/arm_psci.h > kvm: arm64: Expose debug HW register numbers for Realm > arm64: rme: Allow checking SVE on VM instance On FVP, the v5+v7 kernel is unable to execute virt-manager: Starting install... Allocating 'test9.qcow2' | 0 B 00:00 ... Removing disk 'test9.qcow2' | 0 B 00:00 ERROR internal error: process exited while connecting to monitor: 2024-12-04T18:56:11.646168Z qemu-system-aarch64: -accel kvm: ioctl(KVM_CREATE_VM) failed: Invalid argument 2024-12-04T18:56:11.646520Z qemu-system-aarch64: -accel kvm: failed to initialize kvm: Invalid argument Domain installation does not appear to have been successful. Below is my virt-manager options: virt-install --machine=virt --arch=aarch64 --name=test9 --memory=2048 --vcpu=1 --nographic --check all=off --features acpi=off --virt-type kvm --boot kernel=Image-cca,initrd=rootfs.cpio,kernel_args='earlycon console=ttyAMA0 rdinit=/sbin/init rw root=/dev/vda acpi=off' --qemu-commandline='-M virt,confidential-guest-support=rme0,gic-version=3 -cpu host -object rme-guest,id=rme0 -nodefaults' --disk size=4 --import --osinfo detect=on,require=off Userland is Ubuntu 24.10, the VMM is Linaro's cca/2024-11-20: https://git.codelinaro.org/linaro/dcap/qemu/-/tree/cca/2024-11-20?ref_type=heads virt-install doesn't complain if I try to bring up a normal VM. Thanks, Itaru. > > Documentation/virt/kvm/api.rst | 3 + > arch/arm64/include/asm/kvm_emulate.h | 34 + > arch/arm64/include/asm/kvm_host.h | 16 +- > arch/arm64/include/asm/kvm_pgtable.h | 2 + > arch/arm64/include/asm/kvm_rme.h | 155 +++ > arch/arm64/include/asm/rmi_cmds.h | 510 ++++++++ > arch/arm64/include/asm/rmi_smc.h | 255 ++++ > arch/arm64/include/asm/virt.h | 1 + > arch/arm64/include/uapi/asm/kvm.h | 49 + > arch/arm64/kvm/Kconfig | 1 + > arch/arm64/kvm/Makefile | 3 +- > arch/arm64/kvm/arch_timer.c | 45 +- > arch/arm64/kvm/arm.c | 166 ++- > arch/arm64/kvm/guest.c | 99 +- > arch/arm64/kvm/hyp/pgtable.c | 5 +- > arch/arm64/kvm/hypercalls.c | 4 +- > arch/arm64/kvm/inject_fault.c | 2 + > arch/arm64/kvm/mmio.c | 10 +- > arch/arm64/kvm/mmu.c | 185 ++- > arch/arm64/kvm/pmu-emul.c | 7 +- > arch/arm64/kvm/psci.c | 29 + > arch/arm64/kvm/reset.c | 23 +- > arch/arm64/kvm/rme-exit.c | 207 ++++ > arch/arm64/kvm/rme.c | 1628 ++++++++++++++++++++++++++ > arch/arm64/kvm/sys_regs.c | 83 +- > arch/arm64/kvm/vgic/vgic-v3.c | 8 +- > arch/arm64/kvm/vgic/vgic.c | 41 +- > arch/arm64/mm/fault.c | 31 +- > drivers/perf/arm_pmu.c | 15 + > include/kvm/arm_arch_timer.h | 2 + > include/kvm/arm_pmu.h | 4 + > include/kvm/arm_psci.h | 2 + > include/linux/kvm_host.h | 2 + > include/linux/perf/arm_pmu.h | 5 + > include/uapi/linux/kvm.h | 31 +- > virt/kvm/kvm_main.c | 7 + > 36 files changed, 3569 insertions(+), 101 deletions(-) > create mode 100644 arch/arm64/include/asm/kvm_rme.h > create mode 100644 arch/arm64/include/asm/rmi_cmds.h > create mode 100644 arch/arm64/include/asm/rmi_smc.h > create mode 100644 arch/arm64/kvm/rme-exit.c > create mode 100644 arch/arm64/kvm/rme.c > > -- > 2.34.1 >
