On 11/4/2024 3:10 PM, Dongli Zhang wrote:
> QEMU uses the kvm_get_msrs() function to save Intel PMU registers from KVM
> and kvm_put_msrs() to restore them to KVM. However, there is no support for
> AMD PMU registers. Currently, has_pmu_version and num_pmu_gp_counters are
> initialized based on cpuid(0xa), which does not apply to AMD processors.
> For AMD CPUs, prior to PerfMonV2, the number of general-purpose registers
> is determined based on the CPU version.
>
> To address this issue, we need to add support for AMD PMU registers.
> Without this support, the following problems can arise:
>
> 1. If the VM is reset (e.g., via QEMU system_reset or VM kdump/kexec) while
> running "perf top", the PMU registers are not disabled properly.
>
> 2. Despite x86_cpu_reset() resetting many registers to zero, kvm_put_msrs()
> does not handle AMD PMU registers, causing some PMU events to remain
> enabled in KVM.
>
> 3. The KVM kvm_pmc_speculative_in_use() function consistently returns true,
> preventing the reclamation of these events. Consequently, the
> kvm_pmc->perf_event remains active.
>
> 4. After a reboot, the VM kernel may report the following error:
>
> [ 0.092011] Performance Events: Fam17h+ core perfctr, Broken BIOS detected, complain to your hardware vendor.
> [ 0.092023] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR c0010200 is 530076)
>
> 5. In the worst case, the active kvm_pmc->perf_event may inject unknown
> NMIs randomly into the VM kernel:
>
> [...] Uhhuh. NMI received for unknown reason 30 on CPU 0.
>
> To resolve these issues, we propose resetting AMD PMU registers during the
> VM reset process.
>
> Signed-off-by: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
> ---
> target/i386/cpu.h | 8 +++
> target/i386/kvm/kvm.c | 156 +++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 161 insertions(+), 3 deletions(-)
>
> diff --git a/target/i386/cpu.h b/target/i386/cpu.h
> index 59959b8b7a..0505eb3b08 100644
> --- a/target/i386/cpu.h
> +++ b/target/i386/cpu.h
> @@ -488,6 +488,14 @@ typedef enum X86Seg {
> #define MSR_CORE_PERF_GLOBAL_CTRL 0x38f
> #define MSR_CORE_PERF_GLOBAL_OVF_CTRL 0x390
>
> +#define MSR_K7_EVNTSEL0 0xc0010000
> +#define MSR_K7_PERFCTR0 0xc0010004
> +#define MSR_F15H_PERF_CTL0 0xc0010200
> +#define MSR_F15H_PERF_CTR0 0xc0010201
> +
> +#define AMD64_NUM_COUNTERS 4
> +#define AMD64_NUM_COUNTERS_CORE 6
> +
> #define MSR_MC0_CTL 0x400
> #define MSR_MC0_STATUS 0x401
> #define MSR_MC0_ADDR 0x402
> diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
> index ca2b644e2c..83ec85a9b9 100644
> --- a/target/i386/kvm/kvm.c
> +++ b/target/i386/kvm/kvm.c
> @@ -2035,7 +2035,7 @@ full:
> abort();
> }
>
> -static void kvm_init_pmu_info(CPUX86State *env)
> +static void kvm_init_pmu_info_intel(CPUX86State *env)
> {
> uint32_t eax, edx;
> uint32_t unused;
> @@ -2072,6 +2072,80 @@ static void kvm_init_pmu_info(CPUX86State *env)
> }
> }
>
> +static void kvm_init_pmu_info_amd(CPUX86State *env)
> +{
> + int64_t family;
> +
> + has_pmu_version = 0;
> +
> + /*
> + * To determine the CPU family, the following code is derived from
> + * x86_cpuid_version_get_family().
> + */
> + family = (env->cpuid_version >> 8) & 0xf;
> + if (family == 0xf) {
> + family += (env->cpuid_version >> 20) & 0xff;
> + }
> +
> + /*
> + * Performance-monitoring supported from K7 and later.
> + */
> + if (family < 6) {
> + return;
> + }
> +
> + has_pmu_version = 1;
> +
> + if (!(env->features[FEAT_8000_0001_ECX] & CPUID_EXT3_PERFCORE)) {
> + num_pmu_gp_counters = AMD64_NUM_COUNTERS;
> + return;
> + }
> +
> + num_pmu_gp_counters = AMD64_NUM_COUNTERS_CORE;
> +}
> +
> +static bool is_same_vendor(CPUX86State *env)
> +{
> + static uint32_t host_cpuid_vendor1;
> + static uint32_t host_cpuid_vendor2;
> + static uint32_t host_cpuid_vendor3;
> +
> + host_cpuid(0x0, 0, NULL, &host_cpuid_vendor1, &host_cpuid_vendor3,
> + &host_cpuid_vendor2);
> +
> + return env->cpuid_vendor1 == host_cpuid_vendor1 &&
> + env->cpuid_vendor2 == host_cpuid_vendor2 &&
> + env->cpuid_vendor3 == host_cpuid_vendor3;
> +}
> +
> +static void kvm_init_pmu_info(CPUX86State *env)
> +{
> + /*
> + * It is not supported to virtualize AMD PMU registers on Intel
> + * processors, nor to virtualize Intel PMU registers on AMD processors.
> + */
> + if (!is_same_vendor(env)) {
> + return;
> + }
> +
> + /*
> + * If KVM_CAP_PMU_CAPABILITY is not supported, there is no way to
> + * disable the AMD pmu virtualization.
> + *
> + * If KVM_CAP_PMU_CAPABILITY is supported, kvm_state->pmu_cap_disabled
> + * indicates the KVM has already disabled the pmu virtualization.
> + */
> + if (kvm_state->pmu_cap_disabled) {
> + return;
> + }
> +
> + if (IS_INTEL_CPU(env)) {
> + kvm_init_pmu_info_intel(env);
> + } else if (IS_AMD_CPU(env)) {
> + kvm_init_pmu_info_amd(env);
> + }
> +}
> +
> int kvm_arch_init_vcpu(CPUState *cs)
> {
> struct {
> @@ -4027,7 +4101,7 @@ static int kvm_put_msrs(X86CPU *cpu, int level)
> kvm_msr_entry_add(cpu, MSR_KVM_POLL_CONTROL, env->poll_control_msr);
> }
>
> - if (has_pmu_version > 0) {
> + if (IS_INTEL_CPU(env) && has_pmu_version > 0) {
> if (has_pmu_version > 1) {
> /* Stop the counter. */
> kvm_msr_entry_add(cpu, MSR_CORE_PERF_FIXED_CTR_CTRL, 0);
> @@ -4058,6 +4132,38 @@ static int kvm_put_msrs(X86CPU *cpu, int level)
> env->msr_global_ctrl);
> }
> }
> +
> + if (IS_AMD_CPU(env) && has_pmu_version > 0) {
> + uint32_t sel_base = MSR_K7_EVNTSEL0;
> + uint32_t ctr_base = MSR_K7_PERFCTR0;
> + /*
> + * The address of the next selector or counter register is
> + * obtained by incrementing the address of the current selector
> + * or counter register by one.
> + */
> + uint32_t step = 1;
> +
> + /*
> + * When PERFCORE is enabled, AMD PMU uses a separate set of
> + * addresses for the selector and counter registers.
> + * Additionally, the address of the next selector or counter
> + * register is determined by incrementing the address of the
> + * current register by two.
> + */
> + if (num_pmu_gp_counters == AMD64_NUM_COUNTERS_CORE) {
> + sel_base = MSR_F15H_PERF_CTL0;
> + ctr_base = MSR_F15H_PERF_CTR0;
> + step = 2;
> + }
> +
> + for (i = 0; i < num_pmu_gp_counters; i++) {
> + kvm_msr_entry_add(cpu, ctr_base + i * step,
> + env->msr_gp_counters[i]);
> + kvm_msr_entry_add(cpu, sel_base + i * step,
> + env->msr_gp_evtsel[i]);
> + }
> + }
> +
> /*
> * Hyper-V partition-wide MSRs: to avoid clearing them on cpu hot-add,
> * only sync them to KVM on the first cpu
> @@ -4503,7 +4609,8 @@ static int kvm_get_msrs(X86CPU *cpu)
> if (env->features[FEAT_KVM] & (1 << KVM_FEATURE_POLL_CONTROL)) {
> kvm_msr_entry_add(cpu, MSR_KVM_POLL_CONTROL, 1);
> }
> - if (has_pmu_version > 0) {
> +
> + if (IS_INTEL_CPU(env) && has_pmu_version > 0) {
> if (has_pmu_version > 1) {
> kvm_msr_entry_add(cpu, MSR_CORE_PERF_FIXED_CTR_CTRL, 0);
> kvm_msr_entry_add(cpu, MSR_CORE_PERF_GLOBAL_CTRL, 0);
> @@ -4519,6 +4626,35 @@ static int kvm_get_msrs(X86CPU *cpu)
> }
> }
>
> + if (IS_AMD_CPU(env) && has_pmu_version > 0) {
> + uint32_t sel_base = MSR_K7_EVNTSEL0;
> + uint32_t ctr_base = MSR_K7_PERFCTR0;
> + /*
> + * The address of the next selector or counter register is
> + * obtained by incrementing the address of the current selector
> + * or counter register by one.
> + */
> + uint32_t step = 1;
> +
> + /*
> + * When PERFCORE is enabled, AMD PMU uses a separate set of
> + * addresses for the selector and counter registers.
> + * Additionally, the address of the next selector or counter
> + * register is determined by incrementing the address of the
> + * current register by two.
> + */
> + if (num_pmu_gp_counters == AMD64_NUM_COUNTERS_CORE) {
> + sel_base = MSR_F15H_PERF_CTL0;
> + ctr_base = MSR_F15H_PERF_CTR0;
> + step = 2;
> + }
> +
> + for (i = 0; i < num_pmu_gp_counters; i++) {
> + kvm_msr_entry_add(cpu, ctr_base + i * step, 0);
> + kvm_msr_entry_add(cpu, sel_base + i * step, 0);
> + }
> + }
> +
> if (env->mcg_cap) {
> kvm_msr_entry_add(cpu, MSR_MCG_STATUS, 0);
> kvm_msr_entry_add(cpu, MSR_MCG_CTL, 0);
> @@ -4830,6 +4966,20 @@ static int kvm_get_msrs(X86CPU *cpu)
> case MSR_P6_EVNTSEL0 ... MSR_P6_EVNTSEL0 + MAX_GP_COUNTERS - 1:
> env->msr_gp_evtsel[index - MSR_P6_EVNTSEL0] = msrs[i].data;
> break;
> + case MSR_K7_EVNTSEL0 ... MSR_K7_EVNTSEL0 + 3:
The upper bound is very unlikely to change but rewriting MSR_K7_EVNTSEL0 + 3 as
MSR_K7_EVNTSEL0 + AMD64_NUM_COUNTERS - 1 may be more readable. Same applies to
MSR_K7_PERFCTR below.
> + env->msr_gp_evtsel[index - MSR_K7_EVNTSEL0] = msrs[i].data;
> + break;
> + case MSR_K7_PERFCTR0 ... MSR_K7_PERFCTR0 + 3:
> + env->msr_gp_counters[index - MSR_K7_PERFCTR0] = msrs[i].data;
> + break;
> + case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTL0 + 0xb:
Same as above except this one needs AMD64_NUM_COUNTERS_CORE * 2 - 1.
> + index = index - MSR_F15H_PERF_CTL0;
> + if (index & 0x1) {
> + env->msr_gp_counters[index] = msrs[i].data;
> + } else {
> + env->msr_gp_evtsel[index] = msrs[i].data;
> + }
> + break;
> case HV_X64_MSR_HYPERCALL:
> env->msr_hv_hypercall = msrs[i].data;
> break;
