Hi Dan! > This should be done over the host-eth3 interface and I have set up the br-eth3 > and qtap3 the same way as with the eth1/br-eth1/qtap1 with one difference - > the br-eth3 interface is setup without an IP. > When doing traffic from the VM to the network I can see traffic on the qtap3 > and br-eth3 interface but none on the eth3. > > Must I specify an IP for the br-eth3 interface? No, an IP is not required. Just activate br-eth3 and don't forget to add a route: ifconfig br-eth3 up 0.0.0.0 route add 192.168.3.0 netmask 255.255.255.0 eth3 Bernhard -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
