On Wed, Jul 05, 2023 at 06:15:35AM -0300, Daniel Henrique Barboza wrote:
> KVM userspaces need to be aware of the host SATP to allow them to
> advertise it back to the guest OS.
>
> Since this information is used to build the guest FDT we can't wait for
> the SATP reg to be readable. We just need to read the SATP mode, thus
> we can use the existing 'satp_mode' global that represents the SATP reg
> with MODE set and both ASID and PPN cleared. E.g. for a 32 bit host
> running with sv32 satp_mode is 0x80000000, for a 64 bit host running
> sv57 satp_mode is 0xa000000000000000, and so on.
>
> Add a new userspace virtual config register 'satp_mode' to allow
> userspace to read the current SATP mode the host is using with
> GET_ONE_REG API before spinning the vcpu.
>
> 'satp_mode' can't be changed via KVM, so SET_ONE_REG is allowed as long
> as userspace writes the existing 'satp_mode'.
>
> Signed-off-by: Daniel Henrique Barboza <dbarboza@xxxxxxxxxxxxxxxx>
> ---
> arch/riscv/include/asm/csr.h | 2 ++
> arch/riscv/include/uapi/asm/kvm.h | 1 +
> arch/riscv/kvm/vcpu.c | 7 +++++++
> 3 files changed, 10 insertions(+)
>
> diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
> index b6acb7ed115f..be6e5c305e5b 100644
> --- a/arch/riscv/include/asm/csr.h
> +++ b/arch/riscv/include/asm/csr.h
> @@ -46,6 +46,7 @@
> #ifndef CONFIG_64BIT
> #define SATP_PPN _AC(0x003FFFFF, UL)
> #define SATP_MODE_32 _AC(0x80000000, UL)
> +#define SATP_MODE_SHIFT 31
> #define SATP_ASID_BITS 9
> #define SATP_ASID_SHIFT 22
> #define SATP_ASID_MASK _AC(0x1FF, UL)
> @@ -54,6 +55,7 @@
> #define SATP_MODE_39 _AC(0x8000000000000000, UL)
> #define SATP_MODE_48 _AC(0x9000000000000000, UL)
> #define SATP_MODE_57 _AC(0xa000000000000000, UL)
> +#define SATP_MODE_SHIFT 60
> #define SATP_ASID_BITS 16
> #define SATP_ASID_SHIFT 44
> #define SATP_ASID_MASK _AC(0xFFFF, UL)
> diff --git a/arch/riscv/include/uapi/asm/kvm.h b/arch/riscv/include/uapi/asm/kvm.h
> index f92790c9481a..0493c078e64e 100644
> --- a/arch/riscv/include/uapi/asm/kvm.h
> +++ b/arch/riscv/include/uapi/asm/kvm.h
> @@ -54,6 +54,7 @@ struct kvm_riscv_config {
> unsigned long marchid;
> unsigned long mimpid;
> unsigned long zicboz_block_size;
> + unsigned long satp_mode;
> };
>
> /* CORE registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
> diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
> index 8bd9f2a8a0b9..b31acf923802 100644
> --- a/arch/riscv/kvm/vcpu.c
> +++ b/arch/riscv/kvm/vcpu.c
> @@ -313,6 +313,9 @@ static int kvm_riscv_vcpu_get_reg_config(struct kvm_vcpu *vcpu,
> case KVM_REG_RISCV_CONFIG_REG(mimpid):
> reg_val = vcpu->arch.mimpid;
> break;
> + case KVM_REG_RISCV_CONFIG_REG(satp_mode):
> + reg_val = satp_mode >> SATP_MODE_SHIFT;
> + break;
> default:
> return -EINVAL;
> }
> @@ -395,6 +398,10 @@ static int kvm_riscv_vcpu_set_reg_config(struct kvm_vcpu *vcpu,
> else
> return -EBUSY;
> break;
> + case KVM_REG_RISCV_CONFIG_REG(satp_mode):
> + if (reg_val != (satp_mode >> SATP_MODE_SHIFT))
> + return -EINVAL;
> + break;
> default:
> return -EINVAL;
> }
> --
> 2.41.0
>
Reviewed-by: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
