Hi, I believe you're missing the updated email for the arm maintainer. Added it. Thanks, Alex On Mon, Jul 18, 2022 at 08:49:07AM -0700, Ricardo Koller wrote: > There are some tests that fail when running on bare metal (including a > passthrough prototype). There are three issues with the tests. The > first one is that there are some missing isb()'s between enabling event > counting and the actual counting. This wasn't an issue on KVM as > trapping on registers served as context synchronization events. The > second issue is that some tests assume that registers reset to 0. And > finally, the third issue is that overflowing the low counter of a > chained event sets the overflow flag in PMVOS and some tests fail by > checking for it not being set. > > I believe the third fix also requires a KVM change, but would like to > double check with others first. The only reference I could find in the > ARM ARM is the AArch64.IncrementEventCounter() pseudocode (DDI 0487H.a, > J1.1.1 "aarch64/debug") that unconditionally sets the PMOVS bit on > overflow. > > Ricardo Koller (3): > arm: pmu: Add missing isb()'s after sys register writing > arm: pmu: Reset the pmu registers before starting some tests > arm: pmu: Remove checks for !overflow in chained counters tests > > arm/pmu.c | 34 +++++++++++++++++++++++----------- > 1 file changed, 23 insertions(+), 11 deletions(-) > > -- > 2.37.0.170.g444d1eabd0-goog >
