On Wed, Jun 29, 2022 at 4:17 AM Maxim Levitsky <mlevitsk@xxxxxxxxxx> wrote: > > On Tue, 2022-06-14 at 20:47 +0000, Sean Christopherson wrote: > > The main goal of this series is to fix KVM's longstanding bug of not > > honoring L1's exception intercepts wants when handling an exception that > > occurs during delivery of a different exception. E.g. if L0 and L1 are > > using shadow paging, and L2 hits a #PF, and then hits another #PF while > > vectoring the first #PF due to _L1_ not having a shadow page for the IDT, > > KVM needs to check L1's intercepts before morphing the #PF => #PF => #DF > > so that the #PF is routed to L1, not injected into L2 as a #DF. > > > > nVMX has hacked around the bug for years by overriding the #PF injector > > for shadow paging to go straight to VM-Exit, and nSVM has started doing > > the same. The hacks mostly work, but they're incomplete, confusing, and > > lead to other hacky code, e.g. bailing from the emulator because #PF > > injection forced a VM-Exit and suddenly KVM is back in L1. > > > > Everything leading up to that are related fixes and cleanups I encountered > > along the way; some through code inspection, some through tests. > > > > v2: > > - Rebased to kvm/queue (commit 8baacf67c76c) + selftests CPUID > > overhaul. > > https://lore.kernel.org/all/20220614200707.3315957-1-seanjc@xxxxxxxxxx > > - Treat KVM_REQ_TRIPLE_FAULT as a pending exception. > > > > v1: https://lore.kernel.org/all/20220311032801.3467418-1-seanjc@xxxxxxxxxx > > > > Sean Christopherson (21): > > KVM: nVMX: Unconditionally purge queued/injected events on nested > > "exit" > > KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS > > KVM: x86: Don't check for code breakpoints when emulating on exception > > KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like > > KVM: nVMX: Prioritize TSS T-flag #DBs over Monitor Trap Flag > > KVM: x86: Treat #DBs from the emulator as fault-like (code and > > DR7.GD=1) > > KVM: x86: Use DR7_GD macro instead of open coding check in emulator > > KVM: nVMX: Ignore SIPI that arrives in L2 when vCPU is not in WFS > > KVM: nVMX: Unconditionally clear mtf_pending on nested VM-Exit > > KVM: VMX: Inject #PF on ENCLS as "emulated" #PF > > KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception > > KVM: x86: Make kvm_queued_exception a properly named, visible struct > > KVM: x86: Formalize blocking of nested pending exceptions > > KVM: x86: Use kvm_queue_exception_e() to queue #DF > > KVM: x86: Hoist nested event checks above event injection logic > > KVM: x86: Evaluate ability to inject SMI/NMI/IRQ after potential > > VM-Exit > > KVM: x86: Morph pending exceptions to pending VM-Exits at queue time > > KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions > > KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle > > behavior > > KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes > > KVM: selftests: Add an x86-only test to verify nested exception > > queueing > > > > arch/x86/include/asm/kvm-x86-ops.h | 2 +- > > arch/x86/include/asm/kvm_host.h | 35 +- > > arch/x86/kvm/emulate.c | 3 +- > > arch/x86/kvm/svm/nested.c | 102 ++--- > > arch/x86/kvm/svm/svm.c | 18 +- > > arch/x86/kvm/vmx/nested.c | 319 +++++++++----- > > arch/x86/kvm/vmx/sgx.c | 2 +- > > arch/x86/kvm/vmx/vmx.c | 53 ++- > > arch/x86/kvm/x86.c | 404 +++++++++++------- > > arch/x86/kvm/x86.h | 11 +- > > tools/testing/selftests/kvm/.gitignore | 1 + > > tools/testing/selftests/kvm/Makefile | 1 + > > .../selftests/kvm/include/x86_64/svm_util.h | 7 +- > > .../selftests/kvm/include/x86_64/vmx.h | 51 +-- > > .../kvm/x86_64/nested_exceptions_test.c | 295 +++++++++++++ > > 15 files changed, 886 insertions(+), 418 deletions(-) > > create mode 100644 tools/testing/selftests/kvm/x86_64/nested_exceptions_test.c > > > > > > base-commit: 816967202161955f398ce379f9cbbedcb1eb03cb > > Hi Sean and everyone! > > > Before I continue reviewing the patch series, I would like you to check if > I understand the monitor trap/pending debug exception/event injection > logic on VMX correctly. I was looking at the spec for several hours and I still have more > questions that answers about it. > > So let me state what I understand: > > 1. Event injection (aka eventinj in SVM terms): > > (VM_ENTRY_INTR_INFO_FIELD/VM_ENTRY_EXCEPTION_ERROR_CODE/VM_ENTRY_INSTRUCTION_LEN) > > If I understand correctly all event injections types just like on SVM just inject, > and never create something pending, and/or drop the injection if event is not allowed > (like if EFLAGS.IF is 0). VMX might have some checks that could fail VM entry, > if for example you try to inject type 0 (hardware interrupt) and EFLAGS.IF is 0, > I haven't checked this) > > All event injections happen right away, don't deliver any payload (like DR6), etc. > > Injection types 4/5/6, do the same as injection types 0/2/3 but in addition to that, > type 4/6 do a DPL check in IDT, and also these types can promote the RIP prior > to pushing it to the exception stack using VM_ENTRY_INSTRUCTION_LEN to be consistent > with cases when these trap like events are intercepted, where the interception happens > on the start of the instruction despite exceptions being trap-like. > > > 2. #DB is the only trap like exception that can be pending for one more instruction > if MOV SS shadow is on (any other cases?). > (AMD just ignores the whole thing, rightfully) > > That is why we have the GUEST_PENDING_DBG_EXCEPTIONS vmcs field. > I understand that it will be written by CPU in case we have VM exit at the moment > where #DB is already pending but not yet delivered. > > That field can also be (sadly) used to "inject" #DB to the guest, if the hypervisor sets it, > and this #DB will actually update DR6 and such, and might be delayed/lost. > > > 3. Facts about MTF: > > * MTF as a feature is basically 'single step the guest by generating MTF VM exits after each executed > instruction', and is enabled in primary execution controls. > > * MTF is also an 'event', and it can be injected separately by the hypervisor with event type 7, > and that has no connection to the 'feature', although usually this injection will be useful > when the hypervisor does some kind of re-injection, triggered by the actual MTF feature. > > * MTF event can be lost, if higher priority VM exit happens, this is why the SDM says about 'pending MTF', > which means that MTF vmexit should happen unless something else prevents it and/or higher priority VM exit > overrides it. > > * MTF event is raised (when the primary execution controls bit is enabled) when: > > - after an injected (vectored), aka eventinj/VM_ENTRY_INTR_INFO_FIELD, done updating the guest state > (that is stack was switched, stuff was pushed to new exception stack, RIP updated to the handler) > I am not 100% sure about this but this seems to be what PRM implies: > > "If the “monitor trap flag” VM-execution control is 1 and VM entry is injecting a vectored event (see Section > 26.6.1), an MTF VM exit is pending on the instruction boundary before the first instruction following the > VM entry." > > - If an interrupt and or #DB exception happens prior to executing first instruction of the guest, > then once again MTF will happen on first instruction of the exception/interrupt handler > > "If the “monitor trap flag” VM-execution control is 1, VM entry is not injecting an event, and a pending event > (e.g., debug exception or interrupt) is delivered before an instruction can execute, an MTF VM exit is pending > on the instruction boundary following delivery of the event (or any nested exception)." > > That means that #DB has higher priority that MTF, but not specified if fault DB or trap DB > > - If instruction causes exception, once again, on first instruction of the exception handler MTF will happen. > > - Otherwise after an instruction (or REP iteration) retires. > > > If you have more facts about MTF and related stuff and/or if I made a mistake in the above, I am all ears to listen! Here's a comprehensive spreadsheet on virtualizing MTF, compiled by Peter Shier. (Just in case anyone is interested in *truly* virtualizing the feature under KVM, rather than just setting a VM-execution control bit in vmcs02 and calling it done.) https://docs.google.com/spreadsheets/d/e/2PACX-1vQYP3PgY_JT42zQaR8uMp4U5LCey0qSlvMb80MLwjw-kkgfr31HqLSqAOGtdZ56aU2YdVTvfkruhuon/pubhtml
