On Tue, 17 May 2022 15:32:19 +0530
Abhishek Sahu <abhsahu@xxxxxxxxxx> wrote:
> 5. Since the runtime PM framework will provide the same functionality,
> so directly writing into PCI PM config register can be replaced with
> the use of runtime PM routines. Also, the use of runtime PM can help
> us in more power saving.
>
> In the systems which do not support D3cold,
>
> With the existing implementation:
>
> // PCI device
> # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
> D3hot
> // upstream bridge
> # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
> D0
>
> With runtime PM:
>
> // PCI device
> # cat /sys/bus/pci/devices/0000\:01\:00.0/power_state
> D3hot
> // upstream bridge
> # cat /sys/bus/pci/devices/0000\:00\:01.0/power_state
> D3hot
I'm not able to reproduce these results. Output below abridged:
# lspci -t
-[0000:00]-+-00.0
+-01.0-[01]--+-00.0
| \-00.1
# grep . /sys/bus/pci/devices/*/power_state
/sys/bus/pci/devices/0000:00:01.0/power_state:D0
/sys/bus/pci/devices/0000:01:00.0/power_state:D3hot
/sys/bus/pci/devices/0000:01:00.1/power_state:D3hot
# lspci -ks $DEV
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750] (rev a2)
Subsystem: eVga.com. Corp. Device 2753
Kernel driver in use: vfio-pci
01:00.1 Audio device: NVIDIA Corporation GM107 High Definition Audio Controller [GeForce 940MX] (rev a1)
Subsystem: eVga.com. Corp. Device 2753
Kernel driver in use: vfio-pci
Kernel modules: snd_hda_intel
Any debugging suggestions? Thanks,
Alex
