[PATCH v2] KVM: x86: check PIR even for vCPUs with disabled APICv

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it.  In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.

Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.

This is not a problem for performance, or if anything it is an
improvement.  First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed.  Second, static_call_cond will
elide the function call if APICv is not present or disabled.  Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.

Cc: stable@xxxxxxxxxxxxxxx
Co-developed-by: Sean Christopherson <seanjc@xxxxxxxxxx>
Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
---
 arch/x86/kvm/lapic.c   |  2 +-
 arch/x86/kvm/svm/svm.c |  1 -
 arch/x86/kvm/x86.c     | 18 +++++++++---------
 3 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 759952dd1222..f206fc35deff 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -707,7 +707,7 @@ static void pv_eoi_clr_pending(struct kvm_vcpu *vcpu)
 static int apic_has_interrupt_for_ppr(struct kvm_lapic *apic, u32 ppr)
 {
 	int highest_irr;
-	if (apic->vcpu->arch.apicv_active)
+	if (kvm_x86_ops.sync_pir_to_irr)
 		highest_irr = static_call(kvm_x86_sync_pir_to_irr)(apic->vcpu);
 	else
 		highest_irr = apic_find_highest_irr(apic);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 5630c241d5f6..d0f68d11ec70 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4651,7 +4651,6 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.load_eoi_exitmap = svm_load_eoi_exitmap,
 	.hwapic_irr_update = svm_hwapic_irr_update,
 	.hwapic_isr_update = svm_hwapic_isr_update,
-	.sync_pir_to_irr = kvm_lapic_find_highest_irr,
 	.apicv_post_state_restore = avic_post_state_restore,
 
 	.set_tss_addr = svm_set_tss_addr,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 627c955101a0..a8f12c83db4b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4448,8 +4448,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
 				    struct kvm_lapic_state *s)
 {
-	if (vcpu->arch.apicv_active)
-		static_call(kvm_x86_sync_pir_to_irr)(vcpu);
+	static_call_cond(kvm_x86_sync_pir_to_irr)(vcpu);
 
 	return kvm_apic_get_state(vcpu, s);
 }
@@ -9528,8 +9527,7 @@ static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 	if (irqchip_split(vcpu->kvm))
 		kvm_scan_ioapic_routes(vcpu, vcpu->arch.ioapic_handled_vectors);
 	else {
-		if (vcpu->arch.apicv_active)
-			static_call(kvm_x86_sync_pir_to_irr)(vcpu);
+		static_call_cond(kvm_x86_sync_pir_to_irr)(vcpu);
 		if (ioapic_in_kernel(vcpu->kvm))
 			kvm_ioapic_scan_entry(vcpu, vcpu->arch.ioapic_handled_vectors);
 	}
@@ -9802,10 +9800,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 
 	/*
 	 * This handles the case where a posted interrupt was
-	 * notified with kvm_vcpu_kick.
+	 * notified with kvm_vcpu_kick.  Assigned devices can
+	 * use the POSTED_INTR_VECTOR even if APICv is disabled,
+	 * so do it even if !kvm_vcpu_apicv_active(vcpu).
 	 */
-	if (kvm_lapic_enabled(vcpu) && vcpu->arch.apicv_active)
-		static_call(kvm_x86_sync_pir_to_irr)(vcpu);
+	if (kvm_lapic_enabled(vcpu))
+		static_call_cond(kvm_x86_sync_pir_to_irr)(vcpu);
 
 	if (kvm_vcpu_exit_request(vcpu)) {
 		vcpu->mode = OUTSIDE_GUEST_MODE;
@@ -9849,8 +9849,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		if (likely(exit_fastpath != EXIT_FASTPATH_REENTER_GUEST))
 			break;
 
-		if (kvm_lapic_enabled(vcpu) && kvm->arch.apicv_active)
-			static_call(kvm_x86_sync_pir_to_irr)(vcpu);
+		if (kvm_lapic_enabled(vcpu))
+			static_call_cond(kvm_x86_sync_pir_to_irr)(vcpu);
 
 		if (unlikely(kvm_vcpu_exit_request(vcpu))) {
 			exit_fastpath = EXIT_FASTPATH_EXIT_HANDLED;
-- 
2.27.0




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux