Hi Marc,
On 2020/2/14 22:57, Marc Zyngier wrote:
To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:
- Reading the pending state is done by using a pair of new redistributor
registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
for a guest (writing to GITS_SGIR)
- Clearing the pending state is done by emiting a VSGI command with the
"clear" bit set.
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
drivers/irqchip/irq-gic-v3-its.c | 56 ++++++++++++++++++++++++++++++
include/linux/irqchip/arm-gic-v3.h | 14 ++++++++
2 files changed, 70 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 1e448d9a16ea..a9753435c4ff 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3915,11 +3915,67 @@ static int its_sgi_set_affinity(struct irq_data *d,
return -EINVAL;
}
+static int its_sgi_set_irqchip_state(struct irq_data *d,
+ enum irqchip_irq_state which,
+ bool state)
+{
+ if (which != IRQCHIP_STATE_PENDING)
+ return -EINVAL;
+
+ if (state) {
+ struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+ struct its_node *its = find_4_1_its();
+ u64 val;
+
+ val = FIELD_PREP(GITS_SGIR_VPEID, vpe->vpe_id);
+ val |= FIELD_PREP(GITS_SGIR_VINTID, d->hwirq);
+ writeq_relaxed(val, its->sgir_base + GITS_SGIR - SZ_128K);
+ } else {
+ its_configure_sgi(d, true);
+ }
+
+ return 0;
+}
+
+static int its_sgi_get_irqchip_state(struct irq_data *d,
+ enum irqchip_irq_state which, bool *val)
+{
+ struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+ void __iomem *base = gic_data_rdist_cpu(vpe->col_idx)->rd_base + SZ_128K;
There might be a race on reading the 'vpe->col_idx' against a concurrent
vPE schedule (col_idx will be modified in its_vpe_set_affinity)? Will we
end up accessing the GICR_VSGI* registers of the old redistributor,
while the vPE is now resident on the new one? Or is it harmful?
The same question for direct_lpi_inv(), where 'vpe->col_idx' will be
used in irq_to_cpuid().
+ u32 count = 1000000; /* 1s! */
+ u32 status;
+
+ if (which != IRQCHIP_STATE_PENDING)
+ return -EINVAL;
+
+ writel_relaxed(vpe->vpe_id, base + GICR_VSGIR);
+ do {
+ status = readl_relaxed(base + GICR_VSGIPENDR);
+ if (!(status & GICR_VSGIPENDR_BUSY))
+ goto out;
+
+ count--;
+ if (!count) {
+ pr_err_ratelimited("Unable to get SGI status\n");
+ goto out;
+ }
+ cpu_relax();
+ udelay(1);
+ } while(count);
+
+out:
+ *val = !!(status & (1 << d->hwirq));
+
+ return 0;
+}
+
static struct irq_chip its_sgi_irq_chip = {
.name = "GICv4.1-sgi",
.irq_mask = its_sgi_mask_irq,
.irq_unmask = its_sgi_unmask_irq,
.irq_set_affinity = its_sgi_set_affinity,
+ .irq_set_irqchip_state = its_sgi_set_irqchip_state,
+ .irq_get_irqchip_state = its_sgi_get_irqchip_state,
};
static int its_sgi_irq_domain_alloc(struct irq_domain *domain,
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index a89578884263..64da945486ac 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -345,6 +345,15 @@
#define GICR_VPENDBASER_4_1_VGRP1EN (1ULL << 58)
#define GICR_VPENDBASER_4_1_VPEID GENMASK_ULL(15, 0)
+#define GICR_VSGIR 0x0080
+
+#define GICR_VSGIR_VPEID GENMASK(15, 0)
+
+#define GICR_VSGIPENDR 0x0088
+
+#define GICR_VSGIPENDR_BUSY (1U << 31)
+#define GICR_VSGIPENDR_PENDING GENMASK(15, 0)
+
/*
* ITS registers, offsets from ITS_base
*/
@@ -368,6 +377,11 @@
#define GITS_TRANSLATER 0x10040
+#define GITS_SGIR 0x20020
+
+#define GITS_SGIR_VPEID GENMASK_ULL(47, 32)
+#define GITS_SGIR_VINTID GENMASK_ULL(7, 0)
The spec says vINTID field is [3:0] of the GITS_SGIR.
Thanks,
Zenghui
+
#define GITS_CTLR_ENABLE (1U << 0)
#define GITS_CTLR_ImDe (1U << 1)
#define GITS_CTLR_ITS_NUMBER_SHIFT 4
