This (now shorter) series expands the existing GICv4 support to deal
with the new GICv4.1 architecture, which comes with a set of major
improvements compared to v4.0:
- One architectural doorbell per vcpu, instead of one doorbell per VLPI
- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor
- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)
- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care).
On the other hand, public documentation is not available yet, so that's a
bit annoying...
The series is roughly organised in 3 parts:
(1) v4.1 doorbell management
(2) Virtual SGI support
(3) Plumbing of virtual SGIs in KVM
Notes:
- The whole thing is tested on a FVP model, which can be obtained
free of charge on ARM's developer website. It requires you to
create an account, unfortunately... You'll need a fix for the
devicetree that is in the kernel tree (should be merged before
the 5.6 release).
- This series has uncovered a behaviour that looks like a HW bug on
the Cavium ThunderX (aka TX1) platform. I'd very much welcome some
clarification from the Marvell/Cavium folks on Cc, as well as an
official erratum number if this happens to be an actual bug.
[v3 update]
People have ignored for two months now, and it is fairly obvious
that support for this machine is slowly bit-rotting. Maybe I'll
drop the patch and instead start the process of removing all TX1
support from the kernel (we'd certainly be better off without it).
[v4 update]
TX1 is now broken in mainline, and nobody cares. Make of this what
you want.
* From v3 [3]:
- Rebased on v5.6-rc1
- Considerably smaller thanks to the initial patches being merged
- Small bug fix after the v5.6 merge window
* From v2 [2]:
- Another bunch of fixes thanks to Zenghui Yu's very careful review
- HW-accelerated SGIs are now optional thanks to new architected
discovery/selection bits exposed by KVM and used by the guest kernel
- Rebased on v5.5-rc2
* From v1 [1]:
- A bunch of minor reworks after Zenghui Yu's review
- A workaround for what looks like a new and unexpected TX1 bug
- A subtle reorder of the series so that some patches can go in early
[1] https://lore.kernel.org/lkml/20190923182606.32100-1-maz@xxxxxxxxxx/
[2] https://lore.kernel.org/lkml/20191027144234.8395-1-maz@xxxxxxxxxx/
[3] https://lore.kernel.org/r/20191224111055.11836-1-maz@xxxxxxxxxx/
Marc Zyngier (20):
irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors
irqchip/gic-v3: Use SGIs without active state if offered
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts
KVM: arm64: GICv4.1: Plumb SGI implementation selection in the
distributor
KVM: arm64: GICv4.1: Reload VLPI configuration on distributor
enable/disable
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
arch/arm/include/asm/kvm_host.h | 1 +
arch/arm64/include/asm/kvm_emulate.h | 3 +-
arch/arm64/include/asm/kvm_host.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 301 ++++++++++++++++++++++++-
drivers/irqchip/irq-gic-v3.c | 12 +-
drivers/irqchip/irq-gic-v4.c | 134 ++++++++++-
include/kvm/arm_vgic.h | 4 +
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 19 +-
include/linux/irqchip/arm-gic-v4.h | 20 +-
virt/kvm/arm/arm.c | 8 +
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 68 +++++-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +++++++-
virt/kvm/arm/vgic/vgic-v3.c | 6 +-
virt/kvm/arm/vgic/vgic-v4.c | 139 ++++++++++--
virt/kvm/arm/vgic/vgic.h | 1 +
17 files changed, 763 insertions(+), 58 deletions(-)
--
2.20.1
