Re: [PATCH RFC 4/5] x86: KVM: add xsetbv to the emulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Paolo Bonzini <pbonzini@xxxxxxxxxx> writes:

> On 20/06/19 13:02, Vitaly Kuznetsov wrote:
>> To avoid hardcoding xsetbv length to '3' we need to support decoding it in
>> the emulator.
>> 
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
>
> Can you also emulate it properly?  The code from QEMU's
> target/i386/fpu_helper.c can help. :)
>

(Had a chance to get back to this just now, sorry)

Assuming __kvm_set_xcr() is also a correct implementation, would the
code below do the job? (Just trying to figure out why you suggested
me to take a look at QEMU's variant):

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index feab24cac610..77cf6c11f66b 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -229,7 +229,7 @@ struct x86_emulate_ops {
 	int (*pre_leave_smm)(struct x86_emulate_ctxt *ctxt,
 			     const char *smstate);
 	void (*post_leave_smm)(struct x86_emulate_ctxt *ctxt);
-
+	int (*set_xcr)(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr);
 };
 
 typedef u32 __attribute__((vector_size(16))) sse128_t;
@@ -429,6 +429,7 @@ enum x86_intercept {
 	x86_intercept_ins,
 	x86_intercept_out,
 	x86_intercept_outs,
+	x86_intercept_xsetbv,
 
 	nr_x86_intercepts
 };
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 718f7d9afedc..f9e843dd992a 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4156,6 +4156,20 @@ static int em_fxrstor(struct x86_emulate_ctxt *ctxt)
 	return rc;
 }
 
+static int em_xsetbv(struct x86_emulate_ctxt *ctxt)
+{
+	u32 eax, ecx, edx;
+
+	eax = reg_read(ctxt, VCPU_REGS_RAX);
+	edx = reg_read(ctxt, VCPU_REGS_RDX);
+	ecx = reg_read(ctxt, VCPU_REGS_RCX);
+
+	if (ctxt->ops->set_xcr(ctxt, ecx, ((u64)edx << 32) | eax))
+		return emulate_gp(ctxt, 0);
+
+	return X86EMUL_CONTINUE;
+}
+
 static bool valid_cr(int nr)
 {
 	switch (nr) {
@@ -4409,6 +4423,12 @@ static const struct opcode group7_rm1[] = {
 	N, N, N, N, N, N,
 };
 
+static const struct opcode group7_rm2[] = {
+	N,
+	II(ImplicitOps | Priv,			em_xsetbv,	xsetbv),
+	N, N, N, N, N, N,
+};
+
 static const struct opcode group7_rm3[] = {
 	DIP(SrcNone | Prot | Priv,		vmrun,		check_svme_pa),
 	II(SrcNone  | Prot | EmulateOnUD,	em_hypercall,	vmmcall),
@@ -4498,7 +4518,8 @@ static const struct group_dual group7 = { {
 }, {
 	EXT(0, group7_rm0),
 	EXT(0, group7_rm1),
-	N, EXT(0, group7_rm3),
+	EXT(0, group7_rm2),
+	EXT(0, group7_rm3),
 	II(SrcNone | DstMem | Mov,		em_smsw, smsw), N,
 	II(SrcMem16 | Mov | Priv,		em_lmsw, lmsw),
 	EXT(0, group7_rm7),
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c6d951cbd76c..9512cc38dfe9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6068,6 +6068,11 @@ static void emulator_post_leave_smm(struct x86_emulate_ctxt *ctxt)
 	kvm_smm_changed(emul_to_vcpu(ctxt));
 }
 
+static int emulator_set_xcr(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr)
+{
+	return __kvm_set_xcr(emul_to_vcpu(ctxt), index, xcr);
+}
+
 static const struct x86_emulate_ops emulate_ops = {
 	.read_gpr            = emulator_read_gpr,
 	.write_gpr           = emulator_write_gpr,
@@ -6109,6 +6114,7 @@ static const struct x86_emulate_ops emulate_ops = {
 	.set_hflags          = emulator_set_hflags,
 	.pre_leave_smm       = emulator_pre_leave_smm,
 	.post_leave_smm      = emulator_post_leave_smm,
+	.set_xcr             = emulator_set_xcr,
 };
 
 static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)

-- 
Vitaly



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux