[KVM PATCH v9 2/2] KVM: add iosignalfd support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



iosignalfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest.  Host userspace can register any arbitrary
IO address with a corresponding eventfd and then pass the eventfd to a
specific end-point of interest for handling.

Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.

However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc).  For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible.  All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling.  This adds additional computational load on the
system, as well as latency to the signalling path.

Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd.  This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.

To test this theory, we built a test-harness called "doorbell".  This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled.  It supports signalling
from either an eventfd, or an ioctl().

We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl().  The other is direct via
iosignalfd.

You can download this test harness here:

ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2

The measured results are as follows:

qemu-mmio:       110000 iops, 9.09us rtt
iosignalfd-mmio: 200100 iops, 5.00us rtt
iosignalfd-pio:  367300 iops, 2.72us rtt

I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy.  However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:

qemu-pio:      153139 iops, 6.53us rtt
iosignalfd-hc: 412585 iops, 2.37us rtt

these are just for fun, for now, until I can gather more data.

Here is a graph for your convenience:

http://developer.novell.com/wiki/images/7/76/Iofd-chart.png

The conclusion to draw is that we save about 4us by skipping the userspace
hop.

--------------------

Signed-off-by: Gregory Haskins <ghaskins@xxxxxxxxxx>
---

 arch/x86/kvm/x86.c       |    1 
 include/linux/kvm.h      |   15 ++
 include/linux/kvm_host.h |   10 +-
 virt/kvm/eventfd.c       |  280 ++++++++++++++++++++++++++++++++++++++++++++++
 virt/kvm/kvm_main.c      |   11 ++
 5 files changed, 313 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0e74d98..6e4b2f5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1204,6 +1204,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
+	case KVM_CAP_IOSIGNALFD:
 	case KVM_CAP_PIT2:
 		r = 1;
 		break;
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 76c6408..236f12d 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -307,6 +307,19 @@ struct kvm_guest_debug {
 	struct kvm_guest_debug_arch arch;
 };
 
+#define KVM_IOSIGNALFD_FLAG_TRIGGER   (1 << 0) /* trigger is valid */
+#define KVM_IOSIGNALFD_FLAG_PIO       (1 << 1) /* is a pio (otherwise mmio) */
+#define KVM_IOSIGNALFD_FLAG_DEASSIGN  (1 << 2)
+
+struct kvm_iosignalfd {
+	__u64 trigger;
+	__u64 addr;        /* legal pio/mmio address */
+	__u32 len;         /* 1, 2, 4, or 8 bytes    */
+	__s32 fd;
+	__u32 flags;
+	__u8  pad[36];
+};
+
 #define KVM_TRC_SHIFT           16
 /*
  * kvm trace categories
@@ -409,6 +422,7 @@ struct kvm_guest_debug {
 #define KVM_CAP_PIT2 33
 #endif
 #define KVM_CAP_SET_BOOT_CPU_ID 34
+#define KVM_CAP_IOSIGNALFD 35
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -517,6 +531,7 @@ struct kvm_irqfd {
 #define KVM_IRQFD                  _IOW(KVMIO, 0x76, struct kvm_irqfd)
 #define KVM_CREATE_PIT2		   _IOW(KVMIO, 0x77, struct kvm_pit_config)
 #define KVM_SET_BOOT_CPU_ID        _IO(KVMIO, 0x78)
+#define KVM_IOSIGNALFD             _IOW(KVMIO, 0x79, struct kvm_iosignalfd)
 
 /*
  * ioctls for vcpu fds
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 306bc67..5099416 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -154,6 +154,7 @@ struct kvm {
 		spinlock_t        lock;
 		struct list_head  items;
 	} irqfds;
+	struct list_head iosignalfds;
 #endif
 	struct kvm_vm_stat stat;
 	struct kvm_arch arch;
@@ -532,19 +533,24 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {}
 
 #ifdef CONFIG_HAVE_KVM_EVENTFD
 
-void kvm_irqfd_init(struct kvm *kvm);
+void kvm_eventfd_init(struct kvm *kvm);
 int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
 void kvm_irqfd_release(struct kvm *kvm);
+int kvm_iosignalfd(struct kvm *kvm, struct kvm_iosignalfd *args);
 
 #else
 
-static inline void kvm_irqfd_init(struct kvm *kvm) {}
+static inline void kvm_eventfd_init(struct kvm *kvm) {}
 static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
 {
 	return -EINVAL;
 }
 
 static inline void kvm_irqfd_release(struct kvm *kvm) {}
+static inline int kvm_iosignalfd(struct kvm *kvm, struct kvm_iosignalfd *args)
+{
+	return -ENOSYS;
+}
 
 #endif /* CONFIG_HAVE_KVM_EVENTFD */
 
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 4092b8d..c03b619 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/kvm.h>
 #include <linux/workqueue.h>
 #include <linux/syscalls.h>
 #include <linux/wait.h>
@@ -28,6 +29,9 @@
 #include <linux/file.h>
 #include <linux/list.h>
 #include <linux/eventfd.h>
+#include <linux/kernel.h>
+
+#include "iodev.h"
 
 /*
  * --------------------------------------------------------------------
@@ -234,10 +238,12 @@ fail:
 }
 
 void
-kvm_irqfd_init(struct kvm *kvm)
+kvm_eventfd_init(struct kvm *kvm)
 {
 	spin_lock_init(&kvm->irqfds.lock);
 	INIT_LIST_HEAD(&kvm->irqfds.items);
+
+	INIT_LIST_HEAD(&kvm->iosignalfds);
 }
 
 /*
@@ -327,3 +333,275 @@ static void __exit irqfd_module_exit(void)
 
 module_init(irqfd_module_init);
 module_exit(irqfd_module_exit);
+
+/*
+ * --------------------------------------------------------------------
+ * iosignalfd: translate a PIO/MMIO memory write to an eventfd signal.
+ *
+ * userspace can register a PIO/MMIO address with an eventfd for recieving
+ * notification when the memory has been touched.
+ * --------------------------------------------------------------------
+ */
+
+struct _iosignalfd {
+	struct list_head     list;
+	u64                  addr;
+	size_t               length;
+	struct eventfd_ctx  *eventfd;
+	u64                  match;
+	struct kvm_io_device dev;
+	int                  wildcard:1;
+};
+
+static inline struct _iosignalfd *
+to_iosignalfd(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct _iosignalfd, dev);
+}
+
+static void
+iosignalfd_release(struct _iosignalfd *p)
+{
+	eventfd_ctx_put(p->eventfd);
+	list_del(&p->list);
+	kfree(p);
+}
+
+static bool
+iosignalfd_in_range(struct _iosignalfd *p, gpa_t addr, int len, const void *val)
+{
+	u64 _val;
+
+	if (!(addr == p->addr && len == p->length))
+		/* address-range must be precise for a hit */
+		return false;
+
+	if (p->wildcard)
+		/* all else equal, wildcard is always a hit */
+		return true;
+
+	/* otherwise, we have to actually compare the data */
+
+	BUG_ON(!IS_ALIGNED((unsigned long)val, len));
+
+	switch (len) {
+	case 1:
+		_val = *(u8 *)val;
+		break;
+	case 2:
+		_val = *(u16 *)val;
+		break;
+	case 4:
+		_val = *(u32 *)val;
+		break;
+	case 8:
+		_val = *(u64 *)val;
+		break;
+	default:
+		return false;
+	}
+
+	return _val == p->match ? true : false;
+}
+
+/*
+ * MMIO/PIO writes trigger an event if the addr/val match
+ */
+static int
+iosignalfd_write(struct kvm_io_device *this, gpa_t addr, int len,
+		 const void *val)
+{
+	struct _iosignalfd *p = to_iosignalfd(this);
+
+	if (!iosignalfd_in_range(p, addr, len, val))
+		return -EOPNOTSUPP;
+
+	eventfd_signal(p->eventfd, 1);
+	return 0;
+}
+
+/*
+ * This function is called as KVM is completely shutting down.  We do not
+ * need to worry about locking just nuke anything we have as quickly as possible
+ */
+static void
+iosignalfd_destructor(struct kvm_io_device *this)
+{
+	struct _iosignalfd *p = to_iosignalfd(this);
+
+	iosignalfd_release(p);
+}
+
+static const struct kvm_io_device_ops iosignalfd_ops = {
+	.write      = iosignalfd_write,
+	.destructor = iosignalfd_destructor,
+};
+
+static bool
+iosignalfd_overlap(struct _iosignalfd *lhs, struct _iosignalfd *rhs)
+{
+	/*
+	 * Check for completely non-overlapping regions.  We can simply
+	 * return "false" for non-overlapping regions and be done with
+	 * it.
+	 */
+	if ((rhs->addr + rhs->length) <= lhs->addr)
+		return false;
+
+	if ((lhs->addr + lhs->length) <= rhs->addr)
+		return false;
+
+	/*
+	 * If we get here, we know there is *some* overlap, but we don't
+	 * yet know how much.  Make sure its a "precise" overlap, or
+	 * its rejected as incompatible
+	 */
+	if (lhs->addr != rhs->addr)
+		return true;
+
+	if (lhs->length != rhs->length)
+		return true;
+
+	/*
+	 * If we get here, the request should be a precise overlap
+	 * between rhs+lhs.  The only thing left to check is for
+	 * data-match overlap.  If the data match is distinctly different
+	 * we can allow the two to co-exist.  Any kind of wild-card
+	 * consitutes an incompatible range, so reject any wild-cards,
+	 * or if the match token is identical.
+	 */
+	if (lhs->wildcard || rhs->wildcard || lhs->match == rhs->match)
+		return true;
+
+	return false;
+}
+
+/* assumes kvm->slots_lock write-lock held */
+static bool
+iosignalfd_check_collision(struct kvm *kvm, struct _iosignalfd *p)
+{
+	struct _iosignalfd *_p;
+
+	list_for_each_entry(_p, &kvm->iosignalfds, list)
+		if (iosignalfd_overlap(_p, p))
+			return true;
+
+	return false;
+}
+
+static int
+kvm_assign_iosignalfd(struct kvm *kvm, struct kvm_iosignalfd *args)
+{
+	int                       pio = args->flags & KVM_IOSIGNALFD_FLAG_PIO;
+	struct kvm_io_bus        *bus = pio ? &kvm->pio_bus : &kvm->mmio_bus;
+	struct _iosignalfd       *p;
+	struct eventfd_ctx       *eventfd;
+	int                       ret;
+
+	switch (args->len) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	eventfd = eventfd_ctx_fdget(args->fd);
+	if (IS_ERR(eventfd))
+		return PTR_ERR(eventfd);
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	INIT_LIST_HEAD(&p->list);
+	p->addr    = args->addr;
+	p->length  = args->len;
+	p->eventfd = eventfd;
+
+	/*
+	 * A trigger address is optional, otherwise this is a wildcard
+	 */
+	if (args->flags & KVM_IOSIGNALFD_FLAG_TRIGGER)
+		p->match = args->trigger;
+	else
+		p->wildcard = true;
+
+	down_write(&kvm->slots_lock);
+
+	/* Verify that there isnt a match already */
+	if (iosignalfd_check_collision(kvm, p)) {
+		ret = -EEXIST;
+		goto unlock_fail;
+	}
+
+	kvm_iodevice_init(&p->dev, &iosignalfd_ops);
+
+	ret = __kvm_io_bus_register_dev(bus, &p->dev);
+	if (ret < 0)
+		goto unlock_fail;
+
+	list_add_tail(&p->list, &kvm->iosignalfds);
+
+	up_write(&kvm->slots_lock);
+
+	return 0;
+
+unlock_fail:
+	up_write(&kvm->slots_lock);
+fail:
+	/*
+	 * it would have never made it to the list in the failure path, so
+	 * we dont need to worry about removing it
+	 */
+	kfree(p);
+
+	eventfd_ctx_put(eventfd);
+
+	return ret;
+}
+
+
+static int
+kvm_deassign_iosignalfd(struct kvm *kvm, struct kvm_iosignalfd *args)
+{
+	int                       pio = args->flags & KVM_IOSIGNALFD_FLAG_PIO;
+	struct kvm_io_bus        *bus = pio ? &kvm->pio_bus : &kvm->mmio_bus;
+	struct _iosignalfd       *p, *tmp;
+	struct eventfd_ctx       *eventfd;
+	int                       ret = 0;
+
+	eventfd = eventfd_ctx_fdget(args->fd);
+	if (IS_ERR(eventfd))
+		return PTR_ERR(eventfd);
+
+	down_write(&kvm->slots_lock);
+
+	list_for_each_entry_safe(p, tmp, &kvm->iosignalfds, list) {
+
+		if (p->eventfd != eventfd)
+			continue;
+
+		__kvm_io_bus_unregister_dev(bus, &p->dev);
+		iosignalfd_release(p);
+	}
+
+	up_write(&kvm->slots_lock);
+
+	eventfd_ctx_put(eventfd);
+
+	return ret;
+}
+
+int
+kvm_iosignalfd(struct kvm *kvm, struct kvm_iosignalfd *args)
+{
+	if (args->flags & KVM_IOSIGNALFD_FLAG_DEASSIGN)
+		return kvm_deassign_iosignalfd(kvm, args);
+
+	return kvm_assign_iosignalfd(kvm, args);
+}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 11595c7..5ac381b 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -979,7 +979,7 @@ static struct kvm *kvm_create_vm(void)
 	spin_lock_init(&kvm->mmu_lock);
 	spin_lock_init(&kvm->requests_lock);
 	kvm_io_bus_init(&kvm->pio_bus);
-	kvm_irqfd_init(kvm);
+	kvm_eventfd_init(kvm);
 	mutex_init(&kvm->lock);
 	mutex_init(&kvm->irq_lock);
 	kvm_io_bus_init(&kvm->mmio_bus);
@@ -2271,6 +2271,15 @@ static long kvm_vm_ioctl(struct file *filp,
 		r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
 		break;
 	}
+	case KVM_IOSIGNALFD: {
+		struct kvm_iosignalfd data;
+
+		r = -EFAULT;
+		if (copy_from_user(&data, argp, sizeof data))
+			goto out;
+		r = kvm_iosignalfd(kvm, &data);
+		break;
+	}
 #ifdef CONFIG_KVM_APIC_ARCHITECTURE
 	case KVM_SET_BOOT_CPU_ID:
 		r = 0;

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux