Re: [Qemu-devel] [PATCH v12 3/4] i386: Enable TOPOEXT feature on AMD EPYC CPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 08, 2018 at 07:36:05PM +0000, Moger, Babu wrote:
> 
> > -----Original Message-----
> > From: Eduardo Habkost [mailto:ehabkost@xxxxxxxxxx]
> > Sent: Friday, June 8, 2018 2:23 PM
> > To: Moger, Babu <Babu.Moger@xxxxxxx>
> > Cc: mst@xxxxxxxxxx; marcel.apfelbaum@xxxxxxxxx; pbonzini@xxxxxxxxxx;
> > rth@xxxxxxxxxxx; mtosatti@xxxxxxxxxx; qemu-devel@xxxxxxxxxx;
> > kvm@xxxxxxxxxxxxxxx; kash@xxxxxxxxxxxxxx; geoff@xxxxxxxxxxxxxxx; Juan
> > Quintela <quintela@xxxxxxxxxx>; xiaoguangrong@xxxxxxxxxxx
> > Subject: Re: [PATCH v12 3/4] i386: Enable TOPOEXT feature on AMD EPYC
> > CPU
> > 
> > On Fri, Jun 08, 2018 at 06:40:16PM +0000, Moger, Babu wrote:
> > > Hi Eduardo,
> > > Sorry for the late response. Got pulled into something else.
> > >
> > > > -----Original Message-----
> > > > From: Eduardo Habkost [mailto:ehabkost@xxxxxxxxxx]
> > > > Sent: Wednesday, June 6, 2018 5:40 PM
> > > > To: Moger, Babu <Babu.Moger@xxxxxxx>
> > > > Cc: mst@xxxxxxxxxx; marcel.apfelbaum@xxxxxxxxx;
> > pbonzini@xxxxxxxxxx;
> > > > rth@xxxxxxxxxxx; mtosatti@xxxxxxxxxx; qemu-devel@xxxxxxxxxx;
> > > > kvm@xxxxxxxxxxxxxxx; kash@xxxxxxxxxxxxxx; geoff@xxxxxxxxxxxxxxx
> > > > Subject: Re: [PATCH v12 3/4] i386: Enable TOPOEXT feature on AMD EPYC
> > > > CPU
> > > >
> > > > On Wed, Jun 06, 2018 at 10:36:45AM -0400, Babu Moger wrote:
> > > > > Enable TOPOEXT feature on EPYC CPU. This is required to support
> > > > > hyperthreading on VM guests. Also extend xlevel to 0x8000001E.
> > > > >
> > > > > Disable TOPOEXT feature for legacy machines.
> > > > >
> > > > > Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
> > > >
> > > > Now, I just noticed we have a problem here:
> > > >
> > > > "-machine pc -cpu EPYC -smp 64" works today
> > > >
> > > > This patch makes it stop working, but it shouldn't.
> > >
> > > No. It works fine. I have tested it.
> > 
> > This doesn't sound right.  The code in this series will error out
> > of TOPOEXT is enabled and you have more than 64 VCPUs.
> > 
> > But I just noticed we have a bug introduced by:
> 
> Oh.. Ok..  Let me retry again with the new patch.
> 
> > 
> > commit f548222c24342ca74689de7794f9006b43f86a54
> > Author: Xiao Guangrong <xiaoguangrong@xxxxxxxxxxx>
> > Date:   Thu May 3 16:06:11 2018 +0800
> > 
> >     migration: introduce decompress-error-check
> > 
> >     QEMU 3.0 enables strict check for compression & decompression to
> >     make the migration more robust, that depends on the source to fix
> >     the internal design which triggers the unexpected error conditions
> > 
> >     To make it work for migrating old version QEMU to 2.13 QEMU, we
> >     introduce this parameter to disable the error check on the
> >     destination which is the default behavior of the machine type
> >     which is older than 2.13, alternately, the strict check can be
> >     enabled explicitly as followings:
> >           -M pc-q35-2.11 -global migration.decompress-error-check=true
> > 
> >     Signed-off-by: Xiao Guangrong <xiaoguangrong@xxxxxxxxxxx>
> >     Reviewed-by: Juan Quintela <quintela@xxxxxxxxxx>
> >     Signed-off-by: Juan Quintela <quintela@xxxxxxxxxx>
> > 
> > This commits added PC_COMPAT_2_12 to the 3.0 machine-types.
> > Because of this bug, TOPOEXT is being unconditionally disabled on
> > all machine-types, unless I apply the fix below:
> > 
> > 
> > diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
> > index 3d81136065..b4c5b03274 100644
> > --- a/hw/i386/pc_piix.c
> > +++ b/hw/i386/pc_piix.c
> > @@ -430,7 +430,6 @@ static void
> > pc_i440fx_3_0_machine_options(MachineClass *m)
> >      pc_i440fx_machine_options(m);
> >      m->alias = "pc";
> >      m->is_default = 1;
> > -    SET_MACHINE_COMPAT(m, PC_COMPAT_2_12);
> >  }
> > 
> >  DEFINE_I440FX_MACHINE(v3_0, "pc-i440fx-3.0", NULL,
> > diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
> > index b60cbb9266..83d6d75efa 100644
> > --- a/hw/i386/pc_q35.c
> > +++ b/hw/i386/pc_q35.c
> > @@ -312,7 +312,6 @@ static void
> > pc_q35_3_0_machine_options(MachineClass *m)
> >  {
> >      pc_q35_machine_options(m);
> >      m->alias = "q35";
> > -    SET_MACHINE_COMPAT(m, PC_COMPAT_2_12);
> >  }
> > 
> >  DEFINE_Q35_MACHINE(v3_0, "pc-q35-3.0", NULL,
> > 
> > >
> > > >
> > > > On the other hand, I believe you expect:
> > > > * "-machine pc -cpu EPYC -smp 8" to automatically enable topoext.
> > > Yes. Only on new machines-types
> > > > * "-machine pc -cpu Opteron_G1 -smp 8" to not enable topoext.
> > > Yes.
> > > > * What about "-machine -cpu Opteron_G1 -smp 8,threads=2"?
> > > No. This should not enable topoext.  Topoext is not supported by
> > Opteron_G1.
> > > This should warn about hyperthreading and continue.
> > 
> > OK, makes sense to me.
> > 
> > > >
> > > >
> > > > We also have other requirements, I will try to enumerate all of
> > > > them below:
> > > >
> > > > 0) "-topoext" explicitly configured (any machine-type):
> > > > * Must never enable topoext.
> > > Yes.
> > > >
> > > > 1) "+topoext" explicitly configured (any machine-type):
> > > > * Must validate topology and refuse to start if unsupported.
> > >
> > > Yes.
> > >
> > > >
> > > > 2) Older machine-types:
> > > > * Must never enable topoext automatically, even if using "EPYC"
> > > >   or "threads=2"
> > > >
> > > Yes.
> > >
> > > > 3) "EPYC" CPU model (on new machine-types):
> > > > * Should enable topoext automatically, but only if topology is
> > > >   supported.
> > > > * Must not error out if topology is not supported.
> > > In new machine types we will enable topoext for "EPYC" CPU model.
> > > Right now(old machine type) we can disable for all the CPU models.
> > > So, we don't need two bits(topoext and auto-topoext)
> > 
> > Right, so you agree that in this case we must _not_ error out if
> > topology is unsupported, correct?  Otherwise we will break this
> > existing use case:
> >   "-machine pc -cpu EPYC -smp 64".
> 
> Ok. I will test this with new fix patch.  
> > 
> > >
> > > I thought we should error out if topology cannot be supported. But we can
> > warn(disable topoext) and continue that is another option.
> > >
> > > > * Should this enable topoext automatically even if threads=1?
> > >
> > > Yes. We should enable even with threads=1.
> > >
> > > >
> > > > 4) Other AMD CPU models with "threads=2" (on new machine-types):
> > > > * We might want to make this enable topoext automatically, too.
> > > >   What do you think?
> > >
> > >   No. We should not enable topoext here. We should depend on CPU
> > model table here.
> > >
> > > >
> > > > Is the above description accurate?  Do you agree with these
> > > > requirements?
> > >
> > > With these requirements in mind, I will send that patches. We can start our
> > discussion.
> > > We don't need one more bits. That is my opinion.
> > 
> > Thanks for confirming the requirements above.
> > 
> > But it doesn't seem to be possible represent these requirements
> > with just one bit.  Otherwise you can't differentiate explicit
> > "+topoext" (1 above) from topoext being implicitly enabled by
> > "-cpu EPYC" (3 above).
> > 
> > Another problem is query-cpu-model-expansion QMP command: this
> > patch makes "topoext" appear on the output of
> > "query-cpu-model-expansion model=EPYC", meaning that management
> > software will assume everybody using the "EPYC" CPU model will
> > require +topoext.  A separate "auto-topoext" property would avoid
> > this issue.
> 
> Sure.  Will work on it.  Yes, I know all these combinations make it very tricky. 

I will rewrite my proposal, to make sure we are on the same page:

0) "-topoext" explicitly configured (any machine-type):
* Will clear TOPOEXT on env->features and set TOPOEXT on
  env->user_features
  (already done today)

1) "+topoext" explicitly configured (any machine-type):
* Will set TOPOEXT on both env->user_features and env->features
  (already done today)

2) Older machine-types:
[CHANGED in v2]
* Will set auto-topoext=off (can be done on compat_props)
* No need to set topoext=off on compat_props (because no CPU model will have
  topoext=on, see #3 below)

3) "EPYC" CPU model (on new machine-types):
[CHANGED IN v2]
* Will set auto-topoext=on (using a new field on X86CPUDefinition)
* Will NOT set TOPOEXT on CPU model table (or it would break
  query-cpu-model-expansion)

4) Other AMD CPU models (on all machine-types):
[CHANGED IN v2]
* auto-topoext=off (the default)
* Will keep TOPOEXT disabled on env->features (the default)


x86_cpu_realizefn:

  if {cpu->cpudef && cpu->cpudef->auto_topoext &&
      TOPOEXT not in env->user_features &&
      supported_topology) {
      set TOPOEXT in env->features
  }

  if (TOPOEXT in env->features && !supported_topology)
      error;
  }

I think this logic will fulfill all the requirements above.

-- 
Eduardo



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux