Re: [PATCH 2/3] sample: vfio mdev display - guest driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon,  9 Apr 2018 12:35:12 +0200
Gerd Hoffmann <kraxel@xxxxxxxxxx> wrote:

> Guest fbdev driver for CONFIG_SAMPLE_VFIO_MDEV_MDPY.
> 
> Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
> ---
>  samples/vfio-mdev/mdpy-fb.c | 232 ++++++++++++++++++++++++++++++++++++++++++++
>  samples/Kconfig             |   9 ++
>  samples/vfio-mdev/Makefile  |   1 +
>  3 files changed, 242 insertions(+)
>  create mode 100644 samples/vfio-mdev/mdpy-fb.c

Looks good to me, just some trivial checkpatch issues below.
 
> diff --git a/samples/vfio-mdev/mdpy-fb.c b/samples/vfio-mdev/mdpy-fb.c
> new file mode 100644
> index 0000000000..0ebd8feead
> --- /dev/null
> +++ b/samples/vfio-mdev/mdpy-fb.c
> @@ -0,0 +1,232 @@
> +/*

SPDX license

> + * Framebuffer driver for mdpy (mediated virtual pci display device).
> + *
> + * See mdpy-defs.h for device specs
> + *
> + *   (c) Gerd Hoffmann <kraxel@xxxxxxxxxx>
> + *
> + * Using some code snippets from simplefb and cirrusfb.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +#include <linux/errno.h>
> +#include <linux/fb.h>
> +#include <linux/io.h>
> +#include <linux/pci.h>
> +#include <linux/module.h>
> +#include <drm/drm_fourcc.h>
> +#include "mdpy-defs.h"
> +
> +static const struct fb_fix_screeninfo mdpy_fb_fix = {
> +	.id		= "mdpy-fb",
> +	.type		= FB_TYPE_PACKED_PIXELS,
> +	.visual		= FB_VISUAL_TRUECOLOR,
> +	.accel		= FB_ACCEL_NONE,
> +};
> +
> +static const struct fb_var_screeninfo mdpy_fb_var = {
> +	.height		= -1,
> +	.width		= -1,
> +	.activate	= FB_ACTIVATE_NOW,
> +	.vmode		= FB_VMODE_NONINTERLACED,
> +
> +	.bits_per_pixel = 32,
> +	.transp.offset	= 24,
> +	.red.offset	= 16,
> +	.green.offset	= 8,
> +	.blue.offset	= 0,
> +	.transp.length	= 8,
> +	.red.length	= 8,
> +	.green.length	= 8,
> +	.blue.length	= 8,
> +};
> +
> +#define PSEUDO_PALETTE_SIZE 16
> +
> +struct mdpy_fb_par {
> +	u32 palette[PSEUDO_PALETTE_SIZE];
> +};
> +
> +static int mdpy_fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
> +			      u_int transp, struct fb_info *info)
> +{
> +	u32 *pal = info->pseudo_palette;
> +	u32 cr = red >> (16 - info->var.red.length);
> +	u32 cg = green >> (16 - info->var.green.length);
> +	u32 cb = blue >> (16 - info->var.blue.length);
> +	u32 value;
> +
> +	if (regno >= PSEUDO_PALETTE_SIZE)
> +		return -EINVAL;
> +
> +	value = (cr << info->var.red.offset) |
> +		(cg << info->var.green.offset) |
> +		(cb << info->var.blue.offset);
> +	if (info->var.transp.length > 0) {
> +		u32 mask = (1 << info->var.transp.length) - 1;

Technically wants a new line here, I'm torn whether I'd ignore that
warning.

> +		mask <<= info->var.transp.offset;
> +		value |= mask;
> +	}
> +	pal[regno] = value;
> +
> +	return 0;
> +}
> +
> +static void mdpy_fb_destroy(struct fb_info *info)
> +{
> +	if (info->screen_base)
> +		iounmap(info->screen_base);
> +}
> +
> +static struct fb_ops mdpy_fb_ops = {
> +	.owner		= THIS_MODULE,
> +	.fb_destroy	= mdpy_fb_destroy,
> +	.fb_setcolreg	= mdpy_fb_setcolreg,
> +	.fb_fillrect	= cfb_fillrect,
> +	.fb_copyarea	= cfb_copyarea,
> +	.fb_imageblit	= cfb_imageblit,
> +};
> +
> +static int mdpy_fb_probe(struct pci_dev *pdev,
> +			 const struct pci_device_id *ent)
> +{
> +	struct fb_info *info;
> +	struct mdpy_fb_par *par;
> +	u32 format, width, height;
> +	int ret;
> +
> +	ret = pci_enable_device(pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = pci_request_regions(pdev, "mdpy-fb");
> +	if (ret < 0)
> +		return ret;
> +
> +	pci_read_config_dword(pdev, MDPY_FORMAT_OFFSET, &format);
> +	pci_read_config_dword(pdev, MDPY_WIDTH_OFFSET,	&width);
> +	pci_read_config_dword(pdev, MDPY_HEIGHT_OFFSET, &height);
> +	if (format != DRM_FORMAT_XRGB8888) {
> +		dev_err(&pdev->dev, "format mismatch (0x%x != 0x%x)\n",
> +			format, DRM_FORMAT_XRGB8888);
> +		return -EINVAL;
> +	}
> +	if (width < 100	 || width > 10000) {
> +		dev_err(&pdev->dev, "width (%d) out of range\n", width);
> +		return -EINVAL;
> +	}
> +	if (height < 100 || height > 10000) {
> +		dev_err(&pdev->dev, "height (%d) out of range\n", height);
> +		return -EINVAL;
> +	}
> +	dev_info(&pdev->dev, "mdpy found: %dx%d framebuffer\n",
> +		 width, height);
> +
> +	info = framebuffer_alloc(sizeof(struct mdpy_fb_par), &pdev->dev);
> +	if (!info)
> +		goto err_release_regions;
> +	pci_set_drvdata(pdev, info);
> +	par = info->par;
> +
> +	info->fix = mdpy_fb_fix;
> +	info->fix.smem_start = pci_resource_start(pdev, 0);
> +	info->fix.smem_len = pci_resource_len(pdev, 0);
> +	info->fix.line_length = width * 4;
> +
> +	info->var = mdpy_fb_var;
> +	info->var.xres = width;
> +	info->var.yres = height;
> +	info->var.xres_virtual = width;
> +	info->var.yres_virtual = height;
> +
> +	info->screen_size = info->fix.smem_len;
> +	info->screen_base = ioremap(info->fix.smem_start,
> +				    info->screen_size);
> +	if (!info->screen_base) {
> +		dev_err(&pdev->dev, "ioremap(pcibar) failed\n");
> +		ret = -EIO;
> +		goto err_release_fb;
> +	}
> +
> +	info->apertures = alloc_apertures(1);
> +	if (!info->apertures) {
> +		ret = -ENOMEM;
> +		goto err_unmap;
> +	}
> +	info->apertures->ranges[0].base = info->fix.smem_start;
> +	info->apertures->ranges[0].size = info->fix.smem_len;
> +
> +	info->fbops = &mdpy_fb_ops;
> +	info->flags = FBINFO_DEFAULT;
> +	info->pseudo_palette = par->palette;
> +
> +	ret = register_framebuffer(info);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"mdpy-fb device register failed: %d\n", ret);
> +		goto err_unmap;
> +	}
> +
> +	dev_info(&pdev->dev, "fb%d registered\n", info->node);
> +	return 0;
> +
> +err_unmap:
> +	iounmap(info->screen_base);
> +
> +err_release_fb:
> +	framebuffer_release(info);
> +
> +err_release_regions:
> +	pci_release_regions(pdev);
> +
> +	return ret;
> +}
> +
> +static void mdpy_fb_remove(struct pci_dev *pdev)
> +{
> +	struct fb_info *info = pci_get_drvdata(pdev);
> +
> +	unregister_framebuffer(info);
> +	framebuffer_release(info);
> +}
> +
> +static struct pci_device_id mdpy_fb_pci_table[] = {
> +	{
> +		.vendor	   = MDPY_PCI_VENDOR_ID,
> +		.device	   = MDPY_PCI_DEVICE_ID,
> +		.subvendor = MDPY_PCI_SUBVENDOR_ID,
> +		.subdevice = MDPY_PCI_SUBDEVICE_ID,
> +	},{

Space after comma, as in the first patch this is the only error from
checkpatch.  Thanks,

Alex

> +		/* end of list */
> +	}
> +};
> +
> +static struct pci_driver mdpy_fb_pci_driver = {
> +	.name		= "mdpy-fb",
> +	.id_table	= mdpy_fb_pci_table,
> +	.probe		= mdpy_fb_probe,
> +	.remove		= mdpy_fb_remove,
> +};
> +
> +static int __init mdpy_fb_init(void)
> +{
> +	int ret;
> +
> +	ret = pci_register_driver(&mdpy_fb_pci_driver);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +module_init(mdpy_fb_init);
> +
> +MODULE_DEVICE_TABLE(pci, mdpy_fb_pci_table);
> +MODULE_LICENSE("GPL v2");
> diff --git a/samples/Kconfig b/samples/Kconfig
> index a0c104adda..755430c788 100644
> --- a/samples/Kconfig
> +++ b/samples/Kconfig
> @@ -119,6 +119,15 @@ config SAMPLE_VFIO_MDEV_MDPY
>  	  mediated device.  It is a simple framebuffer and supports
>  	  the region display interface (VFIO_GFX_PLANE_TYPE_REGION).
>  
> +config SAMPLE_VFIO_MDEV_MDPY_FB
> +	tristate "Build VFIO mdpy example guest fbdev driver -- loadable module only"
> +	depends on FB && m
> +	select FB_CFB_FILLRECT
> +	select FB_CFB_COPYAREA
> +	select FB_CFB_IMAGEBLIT
> +	help
> +	  Guest fbdev driver for the virtual display sample driver.
> +
>  config SAMPLE_STATX
>  	bool "Build example extended-stat using code"
>  	depends on BROKEN
> diff --git a/samples/vfio-mdev/Makefile b/samples/vfio-mdev/Makefile
> index 031d6b88e9..7a5790aaec 100644
> --- a/samples/vfio-mdev/Makefile
> +++ b/samples/vfio-mdev/Makefile
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_SAMPLE_VFIO_MDEV_MTTY) += mtty.o
>  obj-$(CONFIG_SAMPLE_VFIO_MDEV_MDPY) += mdpy.o
> +obj-$(CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB) += mdpy-fb.o




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux