On Mon, 9 Apr 2018 12:35:11 +0200
Gerd Hoffmann <kraxel@xxxxxxxxxx> wrote:
> Simple framebuffer display, demo-ing the vfio region display interface
> (VFIO_GFX_PLANE_TYPE_REGION).
>
> Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
> ---
> samples/vfio-mdev/mdpy-defs.h | 19 +
> samples/vfio-mdev/mdpy.c | 791 ++++++++++++++++++++++++++++++++++++++++++
> samples/Kconfig | 8 +
> samples/vfio-mdev/Makefile | 1 +
> 4 files changed, 819 insertions(+)
> create mode 100644 samples/vfio-mdev/mdpy-defs.h
> create mode 100644 samples/vfio-mdev/mdpy.c
>
> diff --git a/samples/vfio-mdev/mdpy-defs.h b/samples/vfio-mdev/mdpy-defs.h
> new file mode 100644
> index 0000000000..79f0795e11
> --- /dev/null
> +++ b/samples/vfio-mdev/mdpy-defs.h
> @@ -0,0 +1,19 @@
> +/*
> + * Simple pci display device.
checkpatch wants an SPDX license identifier here now and on mdpy.c
below.
> + *
> + * Framebuffer memory is pci bar 0.
> + * Configuration (read-only) is in pci config space.
> + * Format field uses drm fourcc codes.
> + * ATM only DRM_FORMAT_XRGB8888 is supported.
> + */
> +
> +/* pci ids */
> +#define MDPY_PCI_VENDOR_ID 0x1b36 /* redhat */
> +#define MDPY_PCI_DEVICE_ID 0x00f0
I don't see this on pci-ids, so I assume we're just squatting on an
ID. How do we do that without risking that we don't interfere with
some future user? Are we relying on this being a non-default sample
device? Should we just ask for an allocation?
> +#define MDPY_PCI_SUBVENDOR_ID PCI_SUBVENDOR_ID_REDHAT_QUMRANET
> +#define MDPY_PCI_SUBDEVICE_ID PCI_SUBDEVICE_ID_QEMU
> +
> +/* pci cfg space offsets for fb config (dword) */
> +#define MDPY_FORMAT_OFFSET 0x40
> +#define MDPY_WIDTH_OFFSET 0x44
> +#define MDPY_HEIGHT_OFFSET 0x48
As I understand, these are just registers in PCI config space outside
of any capabilities. Wouldn't it be more correct to put these within a
vendor defined capability? The only imposed structure of a vendor
capability is that the byte after the next field is a length field. So
you'd have 34h point to a capability starting address, 40h if you like,
the first byte there would be 09h to identify a vendor capability, the
next byte would be 00h to terminate the capability chain, the next byte
is required to be the length, you're using 3 dwords for 12 bytes plus 4
bytes for the alignment and header, so 10h then the format, width, and
height are the next three dwords and only their offsets within the
vendor capability are hard coded.
If you're feeling motivated, all PCI devices technically also require a
PM capability, but I'm not going to be a stickler for a sample driver.
> diff --git a/samples/vfio-mdev/mdpy.c b/samples/vfio-mdev/mdpy.c
> new file mode 100644
> index 0000000000..25882c7b37
> --- /dev/null
> +++ b/samples/vfio-mdev/mdpy.c
> @@ -0,0 +1,791 @@
> +/*
> + * Mediated virtual PCI display host device driver
> + *
> + * See mdpy-defs.h for device specs
> + *
> + * (c) Gerd Hoffmann <kraxel@xxxxxxxxxx>
> + *
> + * based on mtty driver which is:
> + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
> + * Author: Neo Jia <cjia@xxxxxxxxxx>
> + * Kirti Wankhede <kwankhede@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/vmalloc.h>
> +#include <linux/cdev.h>
> +#include <linux/vfio.h>
> +#include <linux/iommu.h>
> +#include <linux/sysfs.h>
> +#include <linux/mdev.h>
> +#include <linux/pci.h>
> +#include <drm/drm_fourcc.h>
> +#include "mdpy-defs.h"
> +
> +#define MDPY_NAME "mdpy"
> +#define MDPY_CLASS_NAME "mdpy"
> +
> +#define MDPY_CONFIG_SPACE_SIZE 0xff
> +#define MDPY_MEMORY_BAR_OFFSET PAGE_SIZE
> +#define MDPY_DISPLAY_REGION 16
> +
> +#define STORE_LE16(addr, val) (*(u16 *)addr = val)
> +#define STORE_LE32(addr, val) (*(u32 *)addr = val)
> +
> +
> +MODULE_LICENSE("GPL v2");
> +
> +static int max_devices = 4;
> +module_param_named(count, max_devices, int, 0444);
> +MODULE_PARM_DESC(count, "number of " MDPY_NAME " devices");
> +
> +
> +#define MDPY_TYPE_1 "vga"
> +#define MDPY_TYPE_2 "xga"
> +#define MDPY_TYPE_3 "hd"
> +
> +static const struct mdpy_type {
> + const char *name;
> + u32 format;
> + u32 bytepp;
> + u32 width;
> + u32 height;
> +} mdpy_types[] = {
> + {
> + .name = MDPY_CLASS_NAME "-" MDPY_TYPE_1,
> + .format = DRM_FORMAT_XRGB8888,
> + .bytepp = 4,
> + .width = 640,
> + .height = 480,
> + },{
Here and below checkpatch throws an error for no space after the
comma. Seems more of a nit in this context, but easy enough to make it
happy.
> + .name = MDPY_CLASS_NAME "-" MDPY_TYPE_2,
> + .format = DRM_FORMAT_XRGB8888,
> + .bytepp = 4,
> + .width = 1024,
> + .height = 768,
> + },{
> + .name = MDPY_CLASS_NAME "-" MDPY_TYPE_3,
> + .format = DRM_FORMAT_XRGB8888,
> + .bytepp = 4,
> + .width = 1920,
> + .height = 1080,
> + },
> +};
> +
> +static dev_t mdpy_devt;
> +static struct class *mdpy_class;
> +static struct cdev mdpy_cdev;
> +static struct device mdpy_dev;
> +static u32 mdpy_count;
> +
> +/* State of each mdev device */
> +struct mdev_state {
> + u8 *vconfig;
> + u32 bar_mask;
> + struct mutex ops_lock;
> + struct mdev_device *mdev;
> + struct vfio_device_info dev_info;
> +
> + const struct mdpy_type *type;
> + u32 memsize;
> + void *memblk;
> +};
> +
> +static const struct mdpy_type *mdpy_find_type(struct kobject *kobj)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(mdpy_types); i++)
> + if (strcmp(mdpy_types[i].name, kobj->name) == 0)
> + return mdpy_types + i;
> + return NULL;
> +}
> +
> +static void mdpy_create_config_space(struct mdev_state *mdev_state)
> +{
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_VENDOR_ID],
> + MDPY_PCI_VENDOR_ID);
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_DEVICE_ID],
> + MDPY_PCI_DEVICE_ID);
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_SUBSYSTEM_VENDOR_ID],
> + MDPY_PCI_SUBVENDOR_ID);
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_SUBSYSTEM_ID],
> + MDPY_PCI_SUBDEVICE_ID);
> +
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_COMMAND],
> + PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
> + STORE_LE16((u16 *) &mdev_state->vconfig[PCI_CLASS_DEVICE],
> + PCI_CLASS_DISPLAY_OTHER);
> + mdev_state->vconfig[PCI_CLASS_REVISION] = 0x01;
> +
> + STORE_LE32((u32 *) &mdev_state->vconfig[PCI_BASE_ADDRESS_0],
> + PCI_BASE_ADDRESS_SPACE_MEMORY |
> + PCI_BASE_ADDRESS_MEM_TYPE_32 |
> + PCI_BASE_ADDRESS_MEM_PREFETCH);
> + mdev_state->bar_mask = ~(mdev_state->memsize) + 1;
> +
> + /* Vendor specific data */
> + STORE_LE32((u32 *) &mdev_state->vconfig[MDPY_FORMAT_OFFSET],
> + mdev_state->type->format);
> + STORE_LE32((u32 *) &mdev_state->vconfig[MDPY_WIDTH_OFFSET],
> + mdev_state->type->width);
> + STORE_LE32((u32 *) &mdev_state->vconfig[MDPY_HEIGHT_OFFSET],
> + mdev_state->type->height);
> +}
> +
> +static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
> + char *buf, u32 count)
> +{
> + struct device *dev = mdev_dev(mdev_state->mdev);
> + u32 cfg_addr;
> +
> + switch (offset) {
> + case PCI_BASE_ADDRESS_0:
> + cfg_addr = *(u32 *)buf;
> +
> + if (cfg_addr == 0xffffffff) {
> + cfg_addr = (cfg_addr & mdev_state->bar_mask);
> + } else {
> + cfg_addr &= PCI_BASE_ADDRESS_MEM_MASK;
> + if (cfg_addr)
> + dev_info(dev, "BAR0 @ 0x%x\n", cfg_addr);
> + }
> +
> + cfg_addr |= (mdev_state->vconfig[offset] &
> + ~PCI_BASE_ADDRESS_MEM_MASK);
> + STORE_LE32(&mdev_state->vconfig[offset], cfg_addr);
> + break;
> + }
> +}
> +
> +static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
> + loff_t pos, bool is_write)
> +{
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> + struct device *dev = mdev_dev(mdev);
> + int ret = 0;
> +
> + mutex_lock(&mdev_state->ops_lock);
> +
> + if (pos < MDPY_CONFIG_SPACE_SIZE) {
> + if (is_write) {
> + handle_pci_cfg_write(mdev_state, pos, buf, count);
> + } else {
> + memcpy(buf, (mdev_state->vconfig + pos), count);
> + }
> +
> + } else {
> + dev_info(dev, "%s: %s @0x%llx (unhandled)\n",
> + __func__, is_write ? "WR" : "RD", pos);
> + ret = -1;
> + goto accessfailed;
> + }
> +
> + ret = count;
> +
> +
> +accessfailed:
> + mutex_unlock(&mdev_state->ops_lock);
> +
> + return ret;
> +}
> +
> +int mdpy_reset(struct mdev_device *mdev)
> +{
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> + u32 stride, i;
> +
> + /* initialize with gray gradient */
> + stride = mdev_state->type->width * mdev_state->type->bytepp;
> + for (i = 0; i < mdev_state->type->height; i++)
> + memset(mdev_state->memblk + i * stride,
> + i * 255 / mdev_state->type->height,
> + stride);
> + return 0;
> +}
> +
> +int mdpy_create(struct kobject *kobj, struct mdev_device *mdev)
> +{
> + const struct mdpy_type *type = mdpy_find_type(kobj);
> + struct device *dev = mdev_dev(mdev);
> + struct mdev_state *mdev_state;
> + u32 fbsize;
> +
> + if (mdpy_count >= max_devices)
> + return -ENOMEM;
> +
> + mdev_state = kzalloc(sizeof(struct mdev_state), GFP_KERNEL);
> + if (mdev_state == NULL)
> + return -ENOMEM;
> +
> + mdev_state->vconfig = kzalloc(MDPY_CONFIG_SPACE_SIZE, GFP_KERNEL);
> + if (mdev_state->vconfig == NULL) {
> + kfree(mdev_state);
> + return -ENOMEM;
> + }
> +
> + if (!type)
> + type = &mdpy_types[0];
> + fbsize = roundup_pow_of_two(type->width * type->height * type->bytepp);
> +
> + mdev_state->memblk = vmalloc_user(fbsize);
> + if (!mdev_state->memblk) {
> + kfree(mdev_state->vconfig);
> + kfree(mdev_state);
> + return -ENOMEM;
> + }
> + dev_info(dev, "%s: %s (%dx%d)\n",
> + __func__, kobj->name, type->width, type->height);
> +
> + mutex_init(&mdev_state->ops_lock);
> + mdev_state->mdev = mdev;
> + mdev_set_drvdata(mdev, mdev_state);
> +
> + mdev_state->type = type;
> + mdev_state->memsize = fbsize;
> + mdpy_create_config_space(mdev_state);
> + mdpy_reset(mdev);
> +
> + mdpy_count++;
> + return 0;
> +}
> +
> +int mdpy_remove(struct mdev_device *mdev)
> +{
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> + struct device *dev = mdev_dev(mdev);
> +
> + dev_info(dev, "%s\n", __func__);
> +
> + mdev_set_drvdata(mdev, NULL);
> + vfree(mdev_state->memblk);
> + kfree(mdev_state->vconfig);
> + kfree(mdev_state);
> +
> + mdpy_count--;
> + return 0;
> +}
> +
> +ssize_t mdpy_read(struct mdev_device *mdev, char __user *buf, size_t count,
> + loff_t *ppos)
> +{
> + unsigned int done = 0;
> + int ret;
> +
> + while (count) {
> + size_t filled;
> +
> + if (count >= 4 && !(*ppos % 4)) {
> + u32 val;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, false);
> + if (ret <= 0)
> + goto read_err;
> +
> + if (copy_to_user(buf, &val, sizeof(val)))
> + goto read_err;
> +
> + filled = 4;
> + } else if (count >= 2 && !(*ppos % 2)) {
> + u16 val;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, false);
> + if (ret <= 0)
> + goto read_err;
> +
> + if (copy_to_user(buf, &val, sizeof(val)))
> + goto read_err;
> +
> + filled = 2;
> + } else {
> + u8 val;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, false);
> + if (ret <= 0)
> + goto read_err;
> +
> + if (copy_to_user(buf, &val, sizeof(val)))
> + goto read_err;
> +
> + filled = 1;
> + }
> +
> + count -= filled;
> + done += filled;
> + *ppos += filled;
> + buf += filled;
> + }
> +
> + return done;
> +
> +read_err:
> + return -EFAULT;
> +}
> +
> +ssize_t mdpy_write(struct mdev_device *mdev, const char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + unsigned int done = 0;
> + int ret;
> +
> + while (count) {
> + size_t filled;
> +
> + if (count >= 4 && !(*ppos % 4)) {
> + u32 val;
> +
> + if (copy_from_user(&val, buf, sizeof(val)))
> + goto write_err;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, true);
> + if (ret <= 0)
> + goto write_err;
> +
> + filled = 4;
> + } else if (count >= 2 && !(*ppos % 2)) {
> + u16 val;
> +
> + if (copy_from_user(&val, buf, sizeof(val)))
> + goto write_err;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, true);
> + if (ret <= 0)
> + goto write_err;
> +
> + filled = 2;
> + } else {
> + u8 val;
> +
> + if (copy_from_user(&val, buf, sizeof(val)))
> + goto write_err;
> +
> + ret = mdev_access(mdev, (char *)&val, sizeof(val),
> + *ppos, true);
> + if (ret <= 0)
> + goto write_err;
> +
> + filled = 1;
> + }
> + count -= filled;
> + done += filled;
> + *ppos += filled;
> + buf += filled;
> + }
> +
> + return done;
> +write_err:
> + return -EFAULT;
> +}
> +
> +int mdpy_mmap(struct mdev_device *mdev, struct vm_area_struct *vma)
> +{
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> +
> + if (vma->vm_pgoff != MDPY_MEMORY_BAR_OFFSET >> PAGE_SHIFT)
> + return -EINVAL;
> + if (vma->vm_end < vma->vm_start)
> + return -EINVAL;
> + if (vma->vm_end - vma->vm_start > mdev_state->memsize)
> + return -EINVAL;
> + if ((vma->vm_flags & VM_SHARED) == 0)
> + return -EINVAL;
> +
> + return remap_vmalloc_range_partial(vma, vma->vm_start,
> + mdev_state->memblk,
> + vma->vm_end - vma->vm_start);
> +}
> +
> +int mdpy_get_region_info(struct mdev_device *mdev,
> + struct vfio_region_info *region_info,
> + u16 *cap_type_id, void **cap_type)
> +{
> + struct mdev_state *mdev_state;
> +
> + mdev_state = mdev_get_drvdata(mdev);
> + if (!mdev_state)
> + return -EINVAL;
> +
> + if (region_info->index >= VFIO_PCI_NUM_REGIONS &&
> + region_info->index != MDPY_DISPLAY_REGION)
> + return -EINVAL;
> +
> + switch (region_info->index) {
> + case VFIO_PCI_CONFIG_REGION_INDEX:
> + region_info->offset = 0;
> + region_info->size = MDPY_CONFIG_SPACE_SIZE;
> + region_info->flags = (VFIO_REGION_INFO_FLAG_READ |
> + VFIO_REGION_INFO_FLAG_WRITE);
> + break;
> + case VFIO_PCI_BAR0_REGION_INDEX:
> + case MDPY_DISPLAY_REGION:
> + region_info->offset = MDPY_MEMORY_BAR_OFFSET;
That's pretty clever, I'd never considered that two regions could point
to the same device file offset.
> + region_info->size = mdev_state->memsize;
> + region_info->flags = (VFIO_REGION_INFO_FLAG_READ |
> + VFIO_REGION_INFO_FLAG_WRITE |
> + VFIO_REGION_INFO_FLAG_MMAP);
This doesn't appear to be true, the read and write functions call the
access function which only handles the config space region. Are these
really mmap-only regions? read/write access support is often useful
for tracing and debugging, QEMU will break if x-no-mmap=on is used.
Unfortunately I didn't really consider mmap-only regions for the flags,
so there's no way to specify the access permissions for such a region
other than also indication that it supports read(2), write(2).
Thanks,
Alex
> + break;
> + default:
> + region_info->size = 0;
> + region_info->offset = 0;
> + region_info->flags = 0;
> + }
> +
> + return 0;
> +}
> +
> +int mdpy_get_irq_info(struct mdev_device *mdev, struct vfio_irq_info *irq_info)
> +{
> + irq_info->count = 0;
> + return 0;
> +}
> +
> +int mdpy_get_device_info(struct mdev_device *mdev,
> + struct vfio_device_info *dev_info)
> +{
> + dev_info->flags = VFIO_DEVICE_FLAGS_PCI;
> + dev_info->num_regions = VFIO_PCI_NUM_REGIONS;
> + dev_info->num_irqs = VFIO_PCI_NUM_IRQS;
> + return 0;
> +}
> +
> +int mdpy_query_gfx_plane(struct mdev_device *mdev,
> + struct vfio_device_gfx_plane_info *plane)
> +{
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> +
> + if (plane->flags & VFIO_GFX_PLANE_TYPE_PROBE) {
> + if (plane->flags == (VFIO_GFX_PLANE_TYPE_PROBE |
> + VFIO_GFX_PLANE_TYPE_REGION))
> + return 0;
> + return -EINVAL;
> + }
> +
> + if (plane->flags != VFIO_GFX_PLANE_TYPE_REGION)
> + return -EINVAL;
> +
> + plane->drm_format = mdev_state->type->format;
> + plane->width = mdev_state->type->width;
> + plane->height = mdev_state->type->height;
> + plane->stride = (mdev_state->type->width *
> + mdev_state->type->bytepp);
> + plane->size = mdev_state->memsize;
> + plane->region_index = MDPY_DISPLAY_REGION;
> +
> + /* unused */
> + plane->drm_format_mod = 0;
> + plane->x_pos = 0;
> + plane->y_pos = 0;
> + plane->x_hot = 0;
> + plane->y_hot = 0;
> +
> + return 0;
> +}
> +
> +static long mdpy_ioctl(struct mdev_device *mdev, unsigned int cmd,
> + unsigned long arg)
> +{
> + int ret = 0;
> + unsigned long minsz;
> + struct mdev_state *mdev_state;
> +
> + mdev_state = mdev_get_drvdata(mdev);
> +
> + switch (cmd) {
> + case VFIO_DEVICE_GET_INFO:
> + {
> + struct vfio_device_info info;
> +
> + minsz = offsetofend(struct vfio_device_info, num_irqs);
> +
> + if (copy_from_user(&info, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + if (info.argsz < minsz)
> + return -EINVAL;
> +
> + ret = mdpy_get_device_info(mdev, &info);
> + if (ret)
> + return ret;
> +
> + memcpy(&mdev_state->dev_info, &info, sizeof(info));
> +
> + if (copy_to_user((void __user *)arg, &info, minsz))
> + return -EFAULT;
> +
> + return 0;
> + }
> + case VFIO_DEVICE_GET_REGION_INFO:
> + {
> + struct vfio_region_info info;
> + u16 cap_type_id = 0;
> + void *cap_type = NULL;
> +
> + minsz = offsetofend(struct vfio_region_info, offset);
> +
> + if (copy_from_user(&info, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + if (info.argsz < minsz)
> + return -EINVAL;
> +
> + ret = mdpy_get_region_info(mdev, &info, &cap_type_id,
> + &cap_type);
> + if (ret)
> + return ret;
> +
> + if (copy_to_user((void __user *)arg, &info, minsz))
> + return -EFAULT;
> +
> + return 0;
> + }
> +
> + case VFIO_DEVICE_GET_IRQ_INFO:
> + {
> + struct vfio_irq_info info;
> +
> + minsz = offsetofend(struct vfio_irq_info, count);
> +
> + if (copy_from_user(&info, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + if ((info.argsz < minsz) ||
> + (info.index >= mdev_state->dev_info.num_irqs))
> + return -EINVAL;
> +
> + ret = mdpy_get_irq_info(mdev, &info);
> + if (ret)
> + return ret;
> +
> + if (copy_to_user((void __user *)arg, &info, minsz))
> + return -EFAULT;
> +
> + return 0;
> + }
> +
> + case VFIO_DEVICE_QUERY_GFX_PLANE:
> + {
> + struct vfio_device_gfx_plane_info plane;
> +
> + minsz = offsetofend(struct vfio_device_gfx_plane_info,
> + region_index);
> +
> + if (copy_from_user(&plane, (void __user *)arg, minsz))
> + return -EFAULT;
> +
> + if (plane.argsz < minsz)
> + return -EINVAL;
> +
> + ret = mdpy_query_gfx_plane(mdev, &plane);
> + if (ret)
> + return ret;
> +
> + if (copy_to_user((void __user *)arg, &plane, minsz))
> + return -EFAULT;
> +
> + return 0;
> + }
> +
> + case VFIO_DEVICE_SET_IRQS:
> + return -EINVAL;
> +
> + case VFIO_DEVICE_RESET:
> + return mdpy_reset(mdev);
> + }
> + return -ENOTTY;
> +}
> +
> +int mdpy_open(struct mdev_device *mdev)
> +{
> + if (!try_module_get(THIS_MODULE))
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +void mdpy_close(struct mdev_device *mdev)
> +{
> + module_put(THIS_MODULE);
> +}
> +
> +static ssize_t
> +resolution_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct mdev_device *mdev = mdev_from_dev(dev);
> + struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
> +
> + return sprintf(buf, "%dx%d\n",
> + mdev_state->type->width,
> + mdev_state->type->height);
> +}
> +static DEVICE_ATTR_RO(resolution);
> +
> +static struct attribute *mdev_dev_attrs[] = {
> + &dev_attr_resolution.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group mdev_dev_group = {
> + .name = "vendor",
> + .attrs = mdev_dev_attrs,
> +};
> +
> +const struct attribute_group *mdev_dev_groups[] = {
> + &mdev_dev_group,
> + NULL,
> +};
> +
> +static ssize_t
> +name_show(struct kobject *kobj, struct device *dev, char *buf)
> +{
> + return sprintf(buf, "%s\n", kobj->name);
> +}
> +MDEV_TYPE_ATTR_RO(name);
> +
> +static ssize_t
> +description_show(struct kobject *kobj, struct device *dev, char *buf)
> +{
> + const struct mdpy_type *type = mdpy_find_type(kobj);
> +
> + return sprintf(buf, "virtual display, %dx%d framebuffer\n",
> + type ? type->width : 0,
> + type ? type->height : 0);
> +}
> +MDEV_TYPE_ATTR_RO(description);
> +
> +static ssize_t
> +available_instances_show(struct kobject *kobj, struct device *dev, char *buf)
> +{
> + return sprintf(buf, "%d\n", max_devices - mdpy_count);
> +}
> +MDEV_TYPE_ATTR_RO(available_instances);
> +
> +static ssize_t device_api_show(struct kobject *kobj, struct device *dev,
> + char *buf)
> +{
> + return sprintf(buf, "%s\n", VFIO_DEVICE_API_PCI_STRING);
> +}
> +MDEV_TYPE_ATTR_RO(device_api);
> +
> +static struct attribute *mdev_types_attrs[] = {
> + &mdev_type_attr_name.attr,
> + &mdev_type_attr_description.attr,
> + &mdev_type_attr_device_api.attr,
> + &mdev_type_attr_available_instances.attr,
> + NULL,
> +};
> +
> +static struct attribute_group mdev_type_group1 = {
> + .name = MDPY_TYPE_1,
> + .attrs = mdev_types_attrs,
> +};
> +
> +static struct attribute_group mdev_type_group2 = {
> + .name = MDPY_TYPE_2,
> + .attrs = mdev_types_attrs,
> +};
> +
> +static struct attribute_group mdev_type_group3 = {
> + .name = MDPY_TYPE_3,
> + .attrs = mdev_types_attrs,
> +};
> +
> +static struct attribute_group *mdev_type_groups[] = {
> + &mdev_type_group1,
> + &mdev_type_group2,
> + &mdev_type_group3,
> + NULL,
> +};
> +
> +static const struct mdev_parent_ops mdev_fops = {
> + .owner = THIS_MODULE,
> + .mdev_attr_groups = mdev_dev_groups,
> + .supported_type_groups = mdev_type_groups,
> + .create = mdpy_create,
> + .remove = mdpy_remove,
> + .open = mdpy_open,
> + .release = mdpy_close,
> + .read = mdpy_read,
> + .write = mdpy_write,
> + .ioctl = mdpy_ioctl,
> + .mmap = mdpy_mmap,
> +};
> +
> +static const struct file_operations vd_fops = {
> + .owner = THIS_MODULE,
> +};
> +
> +static void mdpy_device_release(struct device *dev)
> +{
> + /* nothing */
> +}
> +
> +static int __init mdpy_dev_init(void)
> +{
> + int ret = 0;
> +
> + ret = alloc_chrdev_region(&mdpy_devt, 0, MINORMASK, MDPY_NAME);
> + if (ret < 0) {
> + pr_err("Error: failed to register mdpy_dev, err: %d\n", ret);
> + return ret;
> + }
> + cdev_init(&mdpy_cdev, &vd_fops);
> + cdev_add(&mdpy_cdev, mdpy_devt, MINORMASK);
> + pr_info("%s: major %d\n", __func__, MAJOR(mdpy_devt));
> +
> + mdpy_class = class_create(THIS_MODULE, MDPY_CLASS_NAME);
> + if (IS_ERR(mdpy_class)) {
> + pr_err("Error: failed to register mdpy_dev class\n");
> + ret = PTR_ERR(mdpy_class);
> + goto failed1;
> + }
> + mdpy_dev.class = mdpy_class;
> + mdpy_dev.release = mdpy_device_release;
> + dev_set_name(&mdpy_dev, "%s", MDPY_NAME);
> +
> + ret = device_register(&mdpy_dev);
> + if (ret)
> + goto failed2;
> +
> + ret = mdev_register_device(&mdpy_dev, &mdev_fops);
> + if (ret)
> + goto failed3;
> +
> + return 0;
> +
> +failed3:
> + device_unregister(&mdpy_dev);
> +failed2:
> + class_destroy(mdpy_class);
> +failed1:
> + cdev_del(&mdpy_cdev);
> + unregister_chrdev_region(mdpy_devt, MINORMASK);
> + return ret;
> +}
> +
> +static void __exit mdpy_dev_exit(void)
> +{
> + mdpy_dev.bus = NULL;
> + mdev_unregister_device(&mdpy_dev);
> +
> + device_unregister(&mdpy_dev);
> + cdev_del(&mdpy_cdev);
> + unregister_chrdev_region(mdpy_devt, MINORMASK);
> + class_destroy(mdpy_class);
> + mdpy_class = NULL;
> +}
> +
> +module_init(mdpy_dev_init)
> +module_exit(mdpy_dev_exit)
> diff --git a/samples/Kconfig b/samples/Kconfig
> index c332a3b9de..a0c104adda 100644
> --- a/samples/Kconfig
> +++ b/samples/Kconfig
> @@ -111,6 +111,14 @@ config SAMPLE_VFIO_MDEV_MTTY
> Build a virtual tty sample driver for use as a VFIO
> mediated device
>
> +config SAMPLE_VFIO_MDEV_MDPY
> + tristate "Build VFIO mdpy example mediated device sample code -- loadable modules only"
> + depends on VFIO_MDEV_DEVICE && m
> + help
> + Build a virtual display sample driver for use as a VFIO
> + mediated device. It is a simple framebuffer and supports
> + the region display interface (VFIO_GFX_PLANE_TYPE_REGION).
> +
> config SAMPLE_STATX
> bool "Build example extended-stat using code"
> depends on BROKEN
> diff --git a/samples/vfio-mdev/Makefile b/samples/vfio-mdev/Makefile
> index cbbd868a50..031d6b88e9 100644
> --- a/samples/vfio-mdev/Makefile
> +++ b/samples/vfio-mdev/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_SAMPLE_VFIO_MDEV_MTTY) += mtty.o
> +obj-$(CONFIG_SAMPLE_VFIO_MDEV_MDPY) += mdpy.o
