Re: [PATCH v2 2/4] KVM: LAPIC: Keep timer running when switching between one-shot and periodic mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2017-10-04 21:33 GMT+08:00 Radim Krčmář <rkrcmar@xxxxxxxxxx>:
> 2017-10-04 09:46+0800, Wanpeng Li:
>> 2017-10-04 1:06 GMT+08:00 Radim Krčmář <rkrcmar@xxxxxxxxxx>:
>> > 2017-09-28 18:04-0700, Wanpeng Li:
>> >> From: Wanpeng Li <wanpeng.li@xxxxxxxxxxx>
>> >>
>> >> If we take TSC-deadline mode timer out of the picture, the Intel SDM
>> >> does not say that the timer is disable when the timer mode is change,
>> >> either from one-shot to periodic or vice versa.
>> >
>> > I think it does, please see comment under [v2 1/4].
>>
>> As I replied to [v2 1/4].
>
> Right, so we probably shouldn't disable the timer.
>
>> >> After this patch, the timer is no longer disarmed on change of mode, so
>> >> the counter (TMCCT) keeps counting down.
>> >>
>> >> So what does a write to LVTT changes ? On baremetal, the change of mode
>> >> is probably taken into account only when the counter reach 0. When this
>> >> happen, LVTT is use to figure out if the counter should restard counting
>> >> down from TMICT (so periodic mode) or stop counting (if one-shot mode).
>> >>
>> >> This patch is based on observation of the behavior of the APIC timer on
>> >> baremetal as well as check that they does not go against the description
>> >> written in the Intel SDM.
>> >>
>> >> Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
>> >> Cc: Radim Krčmář <rkrcmar@xxxxxxxxxx>
>> >> Signed-off-by: Wanpeng Li <wanpeng.li@xxxxxxxxxxx>
>> >> ---
>> >>  arch/x86/kvm/lapic.c | 40 ++++++++++++++++++++++++++++------------
>> >>  1 file changed, 28 insertions(+), 12 deletions(-)
>> >>
>> >> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
>> >> index a739cbb..946c11b 100644
>> >> --- a/arch/x86/kvm/lapic.c
>> >> +++ b/arch/x86/kvm/lapic.c
>> >> @@ -1301,7 +1301,7 @@ static void update_divide_count(struct kvm_lapic *apic)
>> >>                                  apic->divide_count);
>> >>  }
>> >>
>> >> -static void apic_update_lvtt(struct kvm_lapic *apic)
>> >> +static bool apic_update_lvtt(struct kvm_lapic *apic)
>> >>  {
>> >>       u32 timer_mode = kvm_lapic_get_reg(apic, APIC_LVTT) &
>> >>                       apic->lapic_timer.timer_mode_mask;
>> >> @@ -1309,7 +1309,9 @@ static void apic_update_lvtt(struct kvm_lapic *apic)
>> >>       if (apic->lapic_timer.timer_mode != timer_mode) {
>> >>               apic->lapic_timer.timer_mode = timer_mode;
>> >>               hrtimer_cancel(&apic->lapic_timer.timer);
>> >> +             return true;
>> >>       }
>> >> +     return false;
>> >>  }
>> >>
>> >>  static void apic_timer_expired(struct kvm_lapic *apic)
>> >> @@ -1729,7 +1744,8 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
>> >>                       val |= APIC_LVT_MASKED;
>> >>               val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
>> >>               kvm_lapic_set_reg(apic, APIC_LVTT, val);
>> >> -             apic_update_lvtt(apic);
>> >> +             if (apic_update_lvtt(apic) && !apic_lvtt_tscdeadline(apic))
>> >> +                     start_apic_timer(apic, true);
>
> Changing the timer from one-shot to periodic doesn't change the expected
> expiration -- I think we could instead skip hrtimer_cancel() in
> apic_update_lvtt().

Either from one-shot to periodic or vice versa, will do, thanks. :)

Regards,
Wanpeng Li




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux