On Tue, Feb 23, 2016 at 04:04:52PM +0100, Andrew Jones wrote:
> On Fri, Feb 19, 2016 at 04:58:18PM +0100, Andrew Jones wrote:
> > Copy arm's setup code (also DT based) over to powerpc, adapting
> > it a bit. Also bring over arm's setup selftest, giving powerpc
> > its first test.
> >
> > The largest change from arm's setup.c is that instead of using a
> > hardcoded SMP_CACHE_BYTES, cpu_set() is extended to extract the
> > icache and dcache line sizes from the cpu DT nodes. That change
> > also requires that we call cpu_init() before mem_init() in setup().
> >
> > Signed-off-by: Andrew Jones <drjones@xxxxxxxxxx>
> > Reviewed-by: Thomas Huth <thuth@xxxxxxxxxx>
> > Tested-by: Laurent Vivier <lvivier@xxxxxxxxxx>
>
> Hi David,
>
> Any comments on this one?
Uh.. not really. I'm kind of not sure what to say, since by design
it's a broken interim step, that won't work until the fixups in the
next patch.
Given that, nothing looks obvious more broken than is expected, so
Reviewed-by: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
>
> Thanks,
> drew
>
> > ---
> > lib/powerpc/asm/setup.h | 29 ++++++++++
> > lib/powerpc/setup.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++++
> > lib/ppc64/asm/setup.h | 1 +
> > powerpc/Makefile.common | 1 +
> > powerpc/cstart64.S | 16 +++++-
> > powerpc/selftest.c | 63 +++++++++++++++++++-
> > 6 files changed, 256 insertions(+), 4 deletions(-)
> > create mode 100644 lib/powerpc/asm/setup.h
> > create mode 100644 lib/powerpc/setup.c
> > create mode 100644 lib/ppc64/asm/setup.h
> >
> > diff --git a/lib/powerpc/asm/setup.h b/lib/powerpc/asm/setup.h
> > new file mode 100644
> > index 0000000000000..29a6d7d5f705a
> > --- /dev/null
> > +++ b/lib/powerpc/asm/setup.h
> > @@ -0,0 +1,29 @@
> > +#ifndef _ASMPOWERPC_SETUP_H_
> > +#define _ASMPOWERPC_SETUP_H_
> > +/*
> > + * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@xxxxxxxxxx>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include <libcflat.h>
> > +#include <alloc.h> /* phys_addr_t */
> > +
> > +#define NR_CPUS 8 /* arbitrarily set for now */
> > +extern u32 cpus[NR_CPUS];
> > +extern int nr_cpus;
> > +
> > +#define NR_MEM_REGIONS 8
> > +#define MR_F_PRIMARY (1U << 0)
> > +struct mem_region {
> > + phys_addr_t start;
> > + phys_addr_t end;
> > + unsigned int flags;
> > +};
> > +extern struct mem_region mem_regions[NR_MEM_REGIONS];
> > +extern phys_addr_t __physical_start, __physical_end;
> > +extern unsigned __icache_bytes, __dcache_bytes;
> > +
> > +#define PHYSICAL_START (__physical_start)
> > +#define PHYSICAL_END (__physical_end)
> > +
> > +#endif /* _ASMPOWERPC_SETUP_H_ */
> > diff --git a/lib/powerpc/setup.c b/lib/powerpc/setup.c
> > new file mode 100644
> > index 0000000000000..0c0c882a44a10
> > --- /dev/null
> > +++ b/lib/powerpc/setup.c
> > @@ -0,0 +1,150 @@
> > +/*
> > + * Initialize machine setup information and I/O.
> > + *
> > + * After running setup() unit tests may query how many cpus they have
> > + * (nr_cpus), how much memory they have (PHYSICAL_END - PHYSICAL_START),
> > + * may use dynamic memory allocation (malloc, etc.), printf, and exit.
> > + * Finally, argc and argv are also ready to be passed to main().
> > + *
> > + * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@xxxxxxxxxx>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > +#include <libcflat.h>
> > +#include <libfdt/libfdt.h>
> > +#include <devicetree.h>
> > +#include <alloc.h>
> > +#include <asm/setup.h>
> > +#include <asm/page.h>
> > +
> > +extern unsigned long stacktop;
> > +extern void io_init(void);
> > +extern void setup_args(const char *args);
> > +
> > +u32 cpus[NR_CPUS] = { [0 ... NR_CPUS-1] = (~0U) };
> > +int nr_cpus;
> > +
> > +struct mem_region mem_regions[NR_MEM_REGIONS];
> > +phys_addr_t __physical_start, __physical_end;
> > +unsigned __icache_bytes, __dcache_bytes;
> > +
> > +struct cpu_set_params {
> > + unsigned icache_bytes;
> > + unsigned dcache_bytes;
> > +};
> > +
> > +static void cpu_set(int fdtnode, u32 regval, void *info)
> > +{
> > + static bool read_common_info = false;
> > + struct cpu_set_params *params = info;
> > + int cpu = nr_cpus++;
> > +
> > + if (cpu >= NR_CPUS) {
> > + printf("Number cpus exceeds maximum supported (%d).\n",
> > + NR_CPUS);
> > + assert(0);
> > + }
> > + cpus[cpu] = regval;
> > +
> > + if (!read_common_info) {
> > + const struct fdt_property *prop;
> > + u32 *data;
> > +
> > + prop = fdt_get_property(dt_fdt(), fdtnode,
> > + "i-cache-line-size", NULL);
> > + assert(prop != NULL);
> > + data = (u32 *)prop->data;
> > + params->icache_bytes = fdt32_to_cpu(*data);
> > +
> > + prop = fdt_get_property(dt_fdt(), fdtnode,
> > + "d-cache-line-size", NULL);
> > + assert(prop != NULL);
> > + data = (u32 *)prop->data;
> > + params->dcache_bytes = fdt32_to_cpu(*data);
> > +
> > + read_common_info = true;
> > + }
> > +}
> > +
> > +static void cpu_init(void)
> > +{
> > + struct cpu_set_params params;
> > + int ret;
> > +
> > + nr_cpus = 0;
> > + ret = dt_for_each_cpu_node(cpu_set, ¶ms);
> > + assert(ret == 0);
> > + __icache_bytes = params.icache_bytes;
> > + __dcache_bytes = params.dcache_bytes;
> > +}
> > +
> > +static void mem_init(phys_addr_t freemem_start)
> > +{
> > + struct dt_pbus_reg regs[NR_MEM_REGIONS];
> > + struct mem_region primary, mem = {
> > + .start = (phys_addr_t)-1,
> > + };
> > + int nr_regs, i;
> > +
> > + nr_regs = dt_get_memory_params(regs, NR_MEM_REGIONS);
> > + assert(nr_regs > 0);
> > +
> > + primary.end = 0;
> > +
> > + for (i = 0; i < nr_regs; ++i) {
> > + mem_regions[i].start = regs[i].addr;
> > + mem_regions[i].end = regs[i].addr + regs[i].size;
> > +
> > + /*
> > + * pick the region we're in for our primary region
> > + */
> > + if (freemem_start >= mem_regions[i].start
> > + && freemem_start < mem_regions[i].end) {
> > + mem_regions[i].flags |= MR_F_PRIMARY;
> > + primary = mem_regions[i];
> > + }
> > +
> > + /*
> > + * set the lowest and highest addresses found,
> > + * ignoring potential gaps
> > + */
> > + if (mem_regions[i].start < mem.start)
> > + mem.start = mem_regions[i].start;
> > + if (mem_regions[i].end > mem.end)
> > + mem.end = mem_regions[i].end;
> > + }
> > + assert(primary.end != 0);
> > +// assert(!(mem.start & ~PHYS_MASK) && !((mem.end - 1) & ~PHYS_MASK));
> > +
> > + __physical_start = mem.start; /* PHYSICAL_START */
> > + __physical_end = mem.end; /* PHYSICAL_END */
> > +
> > + phys_alloc_init(freemem_start, primary.end - freemem_start);
> > + phys_alloc_set_minimum_alignment(__icache_bytes > __dcache_bytes
> > + ? __icache_bytes : __dcache_bytes);
> > +}
> > +
> > +void setup(const void *fdt)
> > +{
> > + const char *bootargs;
> > + u32 fdt_size;
> > + int ret;
> > +
> > + /*
> > + * Move the fdt to just above the stack. The free memory
> > + * then starts just after the fdt.
> > + */
> > + fdt_size = fdt_totalsize(fdt);
> > + ret = fdt_move(fdt, &stacktop, fdt_size);
> > + assert(ret == 0);
> > + ret = dt_init(&stacktop);
> > + assert(ret == 0);
> > +
> > + cpu_init();
> > + mem_init(PAGE_ALIGN((unsigned long)&stacktop + fdt_size));
> > + io_init();
> > +
> > + ret = dt_get_bootargs(&bootargs);
> > + assert(ret == 0);
> > + setup_args(bootargs);
> > +}
> > diff --git a/lib/ppc64/asm/setup.h b/lib/ppc64/asm/setup.h
> > new file mode 100644
> > index 0000000000000..20192985928a4
> > --- /dev/null
> > +++ b/lib/ppc64/asm/setup.h
> > @@ -0,0 +1 @@
> > +#include "../../powerpc/asm/setup.h"
> > diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common
> > index b21e3933d0643..539bd33d1c309 100644
> > --- a/powerpc/Makefile.common
> > +++ b/powerpc/Makefile.common
> > @@ -26,6 +26,7 @@ cflatobjs += lib/alloc.o
> > cflatobjs += lib/devicetree.o
> > cflatobjs += lib/powerpc/io.o
> > cflatobjs += lib/powerpc/hcall.o
> > +cflatobjs += lib/powerpc/setup.o
> >
> > libgcc := $(shell $(CC) $(machine) --print-libgcc-file-name)
> >
> > diff --git a/powerpc/cstart64.S b/powerpc/cstart64.S
> > index 1884d79871ba5..526452835754f 100644
> > --- a/powerpc/cstart64.S
> > +++ b/powerpc/cstart64.S
> > @@ -20,11 +20,17 @@
> >
> > .section .init
> >
> > +/*
> > + * start is the entry point. r3 points to the DTB
> > + */
> > .globl start
> > start:
> > LOAD_REG_IMMEDIATE(r1, stackptr)
> > LOAD_REG_IMMEDIATE(r2, tocptr)
> >
> > + /* save DTB pointer */
> > + std r3, 56(r1)
> > +
> > /* patch sc1 if needed */
> > bl hcall_have_broken_sc1
> > cmpwi r3, 0
> > @@ -33,7 +39,15 @@ start:
> > LOAD_REG_IMMEDIATE(r4, SC1_REPLACEMENT)
> > stw r4, 0(r3)
> >
> > -1: bl main
> > + /* complete setup */
> > +1: ld r3, 56(r1)
> > + bl setup
> > +
> > + /* run the test */
> > + LOAD_REG_IMMEDIATE(r5, __argc)
> > + LOAD_REG_IMMEDIATE(r4, __argv)
> > + lwz r3, 0(r5)
> > + bl main
> > bl exit
> > b halt
> >
> > diff --git a/powerpc/selftest.c b/powerpc/selftest.c
> > index 2f2a5215dd55c..84867e482d2a2 100644
> > --- a/powerpc/selftest.c
> > +++ b/powerpc/selftest.c
> > @@ -1,7 +1,64 @@
> > +/*
> > + * Test the framework itself. These tests confirm that setup works.
> > + *
> > + * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@xxxxxxxxxx>
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version 2.
> > + */
> > #include <libcflat.h>
> > +#include <util.h>
> > +#include <asm/setup.h>
> >
> > -int main(void)
> > +static void check_setup(int argc, char **argv)
> > {
> > - printf("hello world\n");
> > - return 0;
> > + int nr_tests = 0, len, i;
> > + long val;
> > +
> > + for (i = 0; i < argc; ++i) {
> > +
> > + len = parse_keyval(argv[i], &val);
> > + if (len == -1)
> > + continue;
> > +
> > + argv[i][len] = '\0';
> > + report_prefix_push(argv[i]);
> > +
> > + if (strcmp(argv[i], "mem") == 0) {
> > +
> > + phys_addr_t memsize = PHYSICAL_END - PHYSICAL_START;
> > + phys_addr_t expected = ((phys_addr_t)val)*1024*1024;
> > +
> > + report("size = %d MB", memsize == expected,
> > + memsize/1024/1024);
> > + ++nr_tests;
> > +
> > + } else if (strcmp(argv[i], "smp") == 0) {
> > +
> > + report("nr_cpus = %d", nr_cpus == (int)val, nr_cpus);
> > + ++nr_tests;
> > + }
> > +
> > + report_prefix_pop();
> > + }
> > +
> > + if (nr_tests < 2)
> > + report_abort("missing input");
> > +}
> > +
> > +int main(int argc, char **argv)
> > +{
> > + report_prefix_push("selftest");
> > +
> > + if (!argc)
> > + report_abort("no test specified");
> > +
> > + report_prefix_push(argv[0]);
> > +
> > + if (strcmp(argv[0], "setup") == 0) {
> > +
> > + check_setup(argc-1, &argv[1]);
> > +
> > + }
> > +
> > + return report_summary();
> > }
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
Attachment:
signature.asc
Description: PGP signature
