On Mi, 2015-11-18 at 00:11 -0500, Sasha Levin wrote: > This is a first go at adding support for the modern (based on the 1.0 virtio > spec) virtio-pci implementation. > To sum it up: this is a lightly tested version for feedback about the design > and to weed out major bugs people notice. Feedback is very welcome! /me goes undust the kvmtool patches for seabios. (see https://www.kraxel.org/cgit/seabios/commit/?h=kvmtool, build with CONFIG_KVMTOOL=y + CONFIG_DEBUG_LEVEL=9) nilsson kraxel ~# ~kraxel/projects/kvmtool/lkvm run --name seabios --firmware /home/kraxel/projects/seabios/out-bios-kvmtool/bios.bin --disk /vmdisk/cloud/persistent/Fedora-Cloud-Base-22-20150521.x86_64.raw # lkvm run -k /boot/vmlinuz-3.10.0-324.el7.x86_64 -m 448 -c 4 --name seabios Changing serial settings was 0/0 now 3/0 SeaBIOS (version rel-1.9.0-7-g532b527) BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) binutils: version 2.23.52.0.1-55.el7 20130226 kvmtool: probed 448 MB RAM. Add to e820 map: 00000000 1c000000 1 malloc preinit Add to e820 map: 000a0000 00050000 -1 Add to e820 map: 000f0000 00010000 2 Add to e820 map: 1bfc0000 00040000 2 phys_alloc zone=0x000f78e8 size=14464 align=10 ret=1bfbc6f0 (detail=0x1bfbc6c0) Relocating init from 0x000f40a0 to 0x1bfbc6f0 (size 14464) malloc init init ivt init bda Add to e820 map: 0009fc00 00000400 2 init bios32 init PNPBIOS table init keyboard init mouse init pic math cp init PCI probe phys_alloc zone=0x1bfbff38 size=32 align=10 ret=1bfbc640 (detail=0x1bfbc610) PCI device 00:00.0 (vd=1af4:1000 c=0200) phys_alloc zone=0x1bfbff38 size=32 align=10 ret=1bfbc5f0 (detail=0x1bfbc5c0) PCI device 00:01.0 (vd=1af4:1001 c=0180) Found 2 PCI devices (max PCI bus is 00) tsc calibrate start=71959316 end=71968721 diff=9405 CPU Mhz=5 init timer init lpt Found 2 lpt ports init serial Found 4 serial ports init virtio-blk found virtio-blk at 0:1 phys_alloc zone=0x1bfbff40 size=80 align=10 ret=f78d0 (detail=0x1bfbc590) pci dev 0:1 virtio cap at 0x4c type 1 bar 0 at 0xd2000800 off +0x0000 [mmio] pci dev 0:1 virtio cap at 0x5c type 2 bar 0 at 0xd2000800 off +0x0080 [mmio] pci dev 0:1 virtio cap at 0x70 type 3 bar 0 at 0xd2000800 off +0x0100 [mmio] pci dev 0:1 virtio cap at 0x80 type 4 bar 0 at 0xd2000800 off +0x0180 [mmio] pci dev 0:1 using modern (1.0) virtio mode vp write d2000814 (1) <- 0x0 Segmentation fault With '--virtio-legacy' added seabios manages to load the kernel from disk. cheers, Gerd -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
