Virtual interrupts mapped to a HW interrupt should only be triggered
from inside the kernel. Otherwise, you could end up confusing the
kernel (and the GIC's) state machine.
Rearrange the injection path so that kvm_vgic_inject_irq is
used for non-mapped interrupts, and kvm_vgic_inject_mapped_irq is
used for mapped interrupts. The latter should only be called from
inside the kernel (timer, irqfd).
Reviewed-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
---
include/kvm/arm_vgic.h | 2 +
virt/kvm/arm/vgic.c | 103 +++++++++++++++++++++++++++++++++----------------
2 files changed, 72 insertions(+), 33 deletions(-)
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index e789e47..d901f1a 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -350,6 +350,8 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu);
void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu);
int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num,
bool level);
+int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int cpuid,
+ struct irq_phys_map *map, bool level);
void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);
int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu);
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index b553a8f..9eb489a 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -1555,7 +1555,8 @@ static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level)
}
static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
- unsigned int irq_num, bool level)
+ struct irq_phys_map *map,
+ unsigned int irq_num, bool level)
{
struct vgic_dist *dist = &kvm->arch.vgic;
struct kvm_vcpu *vcpu;
@@ -1563,6 +1564,9 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
int enabled;
bool ret = true, can_inject = true;
+ if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020))
+ return -EINVAL;
+
spin_lock(&dist->lock);
vcpu = kvm_get_vcpu(kvm, cpuid);
@@ -1625,18 +1629,46 @@ static int vgic_update_irq_pending(struct kvm *kvm, int cpuid,
out:
spin_unlock(&dist->lock);
- return ret ? cpuid : -EINVAL;
+ if (ret) {
+ /* kick the specified vcpu */
+ kvm_vcpu_kick(kvm_get_vcpu(kvm, cpuid));
+ }
+
+ return 0;
+}
+
+static int vgic_lazy_init(struct kvm *kvm)
+{
+ int ret = 0;
+
+ if (unlikely(!vgic_initialized(kvm))) {
+ /*
+ * We only provide the automatic initialization of the VGIC
+ * for the legacy case of a GICv2. Any other type must
+ * be explicitly initialized once setup with the respective
+ * KVM device call.
+ */
+ if (kvm->arch.vgic.vgic_model != KVM_DEV_TYPE_ARM_VGIC_V2)
+ return -EBUSY;
+
+ mutex_lock(&kvm->lock);
+ ret = vgic_init(kvm);
+ mutex_unlock(&kvm->lock);
+ }
+
+ return ret;
}
/**
* kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic
* @kvm: The VM structure pointer
* @cpuid: The CPU for PPIs
- * @irq_num: The IRQ number that is assigned to the device
+ * @irq_num: The IRQ number that is assigned to the device. This IRQ
+ * must not be mapped to a HW interrupt.
* @level: Edge-triggered: true: to trigger the interrupt
* false: to ignore the call
- * Level-sensitive true: activates an interrupt
- * false: deactivates an interrupt
+ * Level-sensitive true: raise the input signal
+ * false: lower the input signal
*
* The GIC is not concerned with devices being active-LOW or active-HIGH for
* level-sensitive interrupts. You can think of the level parameter as 1
@@ -1645,39 +1677,44 @@ out:
int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num,
bool level)
{
- int ret = 0;
- int vcpu_id;
-
- if (unlikely(!vgic_initialized(kvm))) {
- /*
- * We only provide the automatic initialization of the VGIC
- * for the legacy case of a GICv2. Any other type must
- * be explicitly initialized once setup with the respective
- * KVM device call.
- */
- if (kvm->arch.vgic.vgic_model != KVM_DEV_TYPE_ARM_VGIC_V2) {
- ret = -EBUSY;
- goto out;
- }
- mutex_lock(&kvm->lock);
- ret = vgic_init(kvm);
- mutex_unlock(&kvm->lock);
+ struct irq_phys_map *map;
+ int ret;
- if (ret)
- goto out;
- }
+ ret = vgic_lazy_init(kvm);
+ if (ret)
+ return ret;
- if (irq_num >= min(kvm->arch.vgic.nr_irqs, 1020))
+ map = vgic_irq_map_search(kvm_get_vcpu(kvm, cpuid), irq_num);
+ if (map)
return -EINVAL;
- vcpu_id = vgic_update_irq_pending(kvm, cpuid, irq_num, level);
- if (vcpu_id >= 0) {
- /* kick the specified vcpu */
- kvm_vcpu_kick(kvm_get_vcpu(kvm, vcpu_id));
- }
+ return vgic_update_irq_pending(kvm, cpuid, NULL, irq_num, level);
+}
-out:
- return ret;
+/**
+ * kvm_vgic_inject_mapped_irq - Inject a physically mapped IRQ to the vgic
+ * @kvm: The VM structure pointer
+ * @cpuid: The CPU for PPIs
+ * @map: Pointer to a irq_phys_map structure describing the mapping
+ * @level: Edge-triggered: true: to trigger the interrupt
+ * false: to ignore the call
+ * Level-sensitive true: raise the input signal
+ * false: lower the input signal
+ *
+ * The GIC is not concerned with devices being active-LOW or active-HIGH for
+ * level-sensitive interrupts. You can think of the level parameter as 1
+ * being HIGH and 0 being LOW and all devices being active-HIGH.
+ */
+int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int cpuid,
+ struct irq_phys_map *map, bool level)
+{
+ int ret;
+
+ ret = vgic_lazy_init(kvm);
+ if (ret)
+ return ret;
+
+ return vgic_update_irq_pending(kvm, cpuid, map, map->virt_irq, level);
}
static irqreturn_t vgic_maintenance_handler(int irq, void *data)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
