Re: kvm-unit-tests: add tscdeadline-latency test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 10, 2014 at 10:49:52PM +0100, Paolo Bonzini wrote:
> 
> 
> On 10/12/2014 21:23, Marcelo Tosatti wrote:
> > 
> > To test latency between TSC deadline timer 
> > interrupt injection.
> > 
> > Signed-off-by: Marcelo Tosatti <mtosatti@xxxxxxxxxx>
> > 
> > Index: kvm-unit-tests/config/config-x86-common.mak
> > ===================================================================
> > --- kvm-unit-tests.orig/config/config-x86-common.mak	2014-06-27 13:43:43.694257143 -0300
> > +++ kvm-unit-tests/config/config-x86-common.mak	2014-12-10 16:10:41.715339378 -0200
> > @@ -69,6 +69,8 @@
> >  
> >  $(TEST_DIR)/apic.elf: $(cstart.o) $(TEST_DIR)/apic.o
> >  
> > +$(TEST_DIR)/tscdeadline-latency.elf: $(cstart.o) $(TEST_DIR)/tscdeadline-latency.o
> > +
> >  $(TEST_DIR)/init.elf: $(cstart.o) $(TEST_DIR)/init.o
> >  
> >  $(TEST_DIR)/realmode.elf: $(TEST_DIR)/realmode.o
> > Index: kvm-unit-tests/config/config-x86_64.mak
> > ===================================================================
> > --- kvm-unit-tests.orig/config/config-x86_64.mak	2014-12-10 16:03:20.609681443 -0200
> > +++ kvm-unit-tests/config/config-x86_64.mak	2014-12-10 16:10:25.172352577 -0200
> > @@ -9,5 +9,6 @@
> >  	  $(TEST_DIR)/pcid.flat $(TEST_DIR)/debug.flat
> >  tests += $(TEST_DIR)/svm.flat
> >  tests += $(TEST_DIR)/vmx.flat
> > +tests += $(TEST_DIR)/tscdeadline-latency.flat
> >  
> >  include config/config-x86-common.mak
> > Index: kvm-unit-tests/x86/tscdeadline-latency.c
> > ===================================================================
> > --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> > +++ kvm-unit-tests/x86/tscdeadline-latency.c	2014-12-10 18:21:38.151253344 -0200
> > @@ -0,0 +1,110 @@
> > +/*
> > + * qemu command line | grep latency | cut -f 2 -d ":" > latency
> > + *
> > + * In octave:
> > + * load latency
> > + * min(list)
> > + * max(list)
> > + * mean(list)
> > + * hist(latency, 50)
> > + */
> > +
> > +#include "libcflat.h"
> > +#include "apic.h"
> > +#include "vm.h"
> > +#include "smp.h"
> > +#include "desc.h"
> > +#include "isr.h"
> > +#include "msr.h"
> > +
> > +static void test_lapic_existence(void)
> > +{
> > +    u32 lvr;
> > +
> > +    lvr = apic_read(APIC_LVR);
> > +    printf("apic version: %x\n", lvr);
> > +    report("apic existence", (u16)lvr == 0x14);
> > +}
> > +
> > +#define TSC_DEADLINE_TIMER_MODE (2 << 17)
> > +#define TSC_DEADLINE_TIMER_VECTOR 0xef
> > +#define MSR_IA32_TSC            0x00000010
> > +#define MSR_IA32_TSCDEADLINE    0x000006e0
> > +
> > +static int tdt_count;
> > +u64 exptime;
> > +int delta;
> > +#define TABLE_SIZE 10000
> > +u64 table[TABLE_SIZE];
> > +volatile int table_idx;
> > +
> > +static void tsc_deadline_timer_isr(isr_regs_t *regs)
> > +{
> > +    u64 now = rdtsc();
> > +    ++tdt_count;
> > +
> > +    if (table_idx < TABLE_SIZE && tdt_count > 1)
> > +        table[table_idx++] = now - exptime;
> > +
> > +    exptime = now+delta;
> > +    wrmsr(MSR_IA32_TSCDEADLINE, now+delta);
> > +    apic_write(APIC_EOI, 0);
> > +}
> > +
> > +static void start_tsc_deadline_timer(void)
> > +{
> > +    handle_irq(TSC_DEADLINE_TIMER_VECTOR, tsc_deadline_timer_isr);
> > +    irq_enable();
> > +
> > +    wrmsr(MSR_IA32_TSCDEADLINE, rdmsr(MSR_IA32_TSC)+delta);
> > +    asm volatile ("nop");
> > +}
> > +
> > +static int enable_tsc_deadline_timer(void)
> > +{
> > +    uint32_t lvtt;
> > +
> > +    if (cpuid(1).c & (1 << 24)) {
> > +        lvtt = TSC_DEADLINE_TIMER_MODE | TSC_DEADLINE_TIMER_VECTOR;
> > +        apic_write(APIC_LVTT, lvtt);
> > +        start_tsc_deadline_timer();
> > +        return 1;
> > +    } else {
> > +        return 0;
> > +    }
> > +}
> > +
> > +static void test_tsc_deadline_timer(void)
> > +{
> > +    if(enable_tsc_deadline_timer()) {
> > +        printf("tsc deadline timer enabled\n");
> > +    } else {
> > +        printf("tsc deadline timer not detected\n");
> > +    }
> > +}
> > +
> > +int main()
> > +{
> > +    int i;
> > +
> > +    setup_vm();
> > +    smp_init();
> > +    setup_idt();
> > +
> > +    test_lapic_existence();
> > +
> > +    mask_pic_interrupts();
> > +
> > +    delta = 200000;
> > +    test_tsc_deadline_timer();
> > +    irq_enable();
> > +
> > +    do {
> > +        asm volatile("hlt");
> > +    } while (table_idx < TABLE_SIZE);
> > +
> > +    for (i = 0; i < TABLE_SIZE; i++)
> > +        printf("latency: %d\n", table[i]);
> > +
> > +    return report_summary();
> > +}
> > Index: kvm-unit-tests/x86/unittests.cfg
> > ===================================================================
> > --- kvm-unit-tests.orig/x86/unittests.cfg	2014-12-10 16:03:20.616681437 -0200
> > +++ kvm-unit-tests/x86/unittests.cfg	2014-12-10 16:15:23.145114609 -0200
> > @@ -161,3 +161,8 @@
> >  [debug]
> >  file = debug.flat
> >  arch = x86_64
> > +
> > +[tscdeadline_latency]
> > +file = tscdeadline_latency.flat
> > +extra_params = -cpu qemu64,+tsc-deadline
> > +arch = x86_64
> > --
> > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > 
> 
> Applied, thanks.  Here is a script I use to run it:
> 
> #! /bin/sh
> time ./x86/run x86/tscdeadline-latency.flat -cpu host | sed -n 's/^latency: //p' > l.txt
> time ./x86/run x86/tscdeadline-latency.flat -append '2000000 4000' -cpu host | sed -n 's/^latency: //p' > l2.txt
> time ./x86/run x86/tscdeadline-latency.flat -append '4000000 2000' -cpu host | sed -n 's/^latency: //p' > l3.txt
> 
> gnuplot << \EOF
>   hist(x,width)=width*floor(x/width) + binwidth/2.0
> 
>   binwidth=500
>   set xrange [0:50000]
>   set boxwidth binwidth
>   set term png size 1024,512
>   set output "200000,10000.png"
>   plot 'l.txt' using (hist($1,binwidth)):(1.0/10000) smooth freq with boxes
> 
>   binwidth=3000
>   set xrange [0:500000]
>   set boxwidth binwidth
>   set term png size 1024,512
>   set output "2000000,4000.png"
>   plot 'l2.txt' using (hist($1,binwidth)):(1.0/4000) smooth freq with boxes
> 
>   binwidth=3000
>   set xrange [0:500000]
>   set boxwidth binwidth
>   set term png size 1024,512
>   set output "4000000,2000.png"
>   plot 'l3.txt' using (hist($1,binwidth)):(1.0/2000) smooth freq with boxes
> EOF
> 
> and I attach the plots I get with a non-realtime kernel.  I'll try a
> realtime kernel tomorrow; in the meanwhile, can you attach the three
> plots you get on your machine too (RT), so that we can be sure we're
> looking at the same thing?
> 
> Paolo


Attached.

3.10.0-rt kernel.

Attachment: 2000000,4000.png
Description: PNG image

Attachment: 200000,10000.png
Description: PNG image

Attachment: 4000000,2000.png
Description: PNG image


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux