Add the necessary documentation to support GICv3.
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Acked-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Acked-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
---
Documentation/devicetree/bindings/arm/gic-v3.txt | 79 ++++++++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/gic-v3.txt
diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt
new file mode 100644
index 0000000..33cd05e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic-v3.txt
@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. Must be a single cell with a value of at least 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ Cells 4 and beyond are reserved for future use. When the 1st cell
+ has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+ ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+ of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+ occupied by the redistributors. Required if more than one such
+ region is present.
+
+Examples:
+
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>, // GICD
+ <0x0 0x2f100000 0 0x200000>, // GICR
+ <0x0 0x2c000000 0 0x2000>, // GICC
+ <0x0 0x2c010000 0 0x2000>, // GICH
+ <0x0 0x2c020000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x0 0x2c010000 0 0x10000>, // GICD
+ <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31
+ <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63
+ <0x0 0x2c040000 0 0x2000>, // GICC
+ <0x0 0x2c060000 0 0x2000>, // GICH
+ <0x0 0x2c080000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+ };
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
