Alex Williamson wrote:
This will be used for RX mode, MAC table, VLAN table control, etc...
The control transaction consists of one or more "out" sg entries and
one or more "in" sg entries. The first out entry contains a header
defining the class and command. Additional out entries may provide
data for the command. A response via the ack entry is required
and the guest will typically be waiting for it.
Signed-off-by: Alex Williamson <alex.williamson@xxxxxx>
---
hw/virtio-net.c | 33 ++++++++++++++++++++++++++++++++-
hw/virtio-net.h | 18 ++++++++++++++++++
2 files changed, 50 insertions(+), 1 deletions(-)
diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 073f23a..3378cc2 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -25,6 +25,7 @@ typedef struct VirtIONet
uint16_t status;
VirtQueue *rx_vq;
VirtQueue *tx_vq;
+ VirtQueue *ctrl_vq;
VLANClientState *vc;
QEMUTimer *tx_timer;
int tx_timer_active;
@@ -79,7 +80,9 @@ static void virtio_net_set_link_status(VLANClientState *vc)
static uint32_t virtio_net_get_features(VirtIODevice *vdev)
{
- uint32_t features = (1 << VIRTIO_NET_F_MAC) | (1 << VIRTIO_NET_F_STATUS);
+ uint32_t features = (1 << VIRTIO_NET_F_MAC) |
+ (1 << VIRTIO_NET_F_STATUS) |
+ (1 << VIRTIO_NET_F_CTRL_VQ);
return features;
}
@@ -91,6 +94,33 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint32_t features)
n->mergeable_rx_bufs = !!(features & (1 << VIRTIO_NET_F_MRG_RXBUF));
}
+static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
+{
+ struct virtio_net_ctrl_hdr *ctrl;
+ virtio_net_ctrl_ack *status;
+ VirtQueueElement elem;
+
+ while (virtqueue_pop(vq, &elem)) {
+ if ((elem.in_num < 1) | (elem.out_num < 1)) {
+ fprintf(stderr, "virtio-net ctrl missing headers\n");
+ exit(1);
+ }
+
+ if (elem.out_sg[0].iov_len < sizeof(*ctrl) ||
+ elem.out_sg[elem.in_num - 1].iov_len < sizeof(*status)) {
+ fprintf(stderr, "virtio-net ctrl header not in correct element\n");
+ exit(1);
+ }
+
+ ctrl = elem.out_sg[0].iov_base;
+ status = elem.in_sg[elem.in_num - 1].iov_base;
This works only because we're dealing with uint8_ts but it's broken
elsewhere in virtio-net. iov_base is guest memory which means it may
have different endianness. We really should be using ldub_p() here.
+ *status = VIRTIO_NET_ERR;
And stb_p() here.
Regards,
Anthony Liguori
+ virtqueue_push(vq, &elem, sizeof(*status));
+ virtio_notify(vdev, vq);
+ }
+}
+
/* RX */
static void virtio_net_handle_rx(VirtIODevice *vdev, VirtQueue *vq)
@@ -356,6 +386,7 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn)
n->vdev.set_features = virtio_net_set_features;
n->rx_vq = virtio_add_queue(&n->vdev, 256, virtio_net_handle_rx);
n->tx_vq = virtio_add_queue(&n->vdev, 256, virtio_net_handle_tx);
+ n->ctrl_vq = virtio_add_queue(&n->vdev, 16, virtio_net_handle_ctrl);
memcpy(n->mac, nd->macaddr, ETH_ALEN);
n->status = VIRTIO_NET_S_LINK_UP;
n->vc = qemu_new_vlan_client(nd->vlan, nd->model, nd->name,
diff --git a/hw/virtio-net.h b/hw/virtio-net.h
index 9dce663..119e38d 100644
--- a/hw/virtio-net.h
+++ b/hw/virtio-net.h
@@ -40,6 +40,7 @@
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
@@ -84,4 +85,21 @@ struct virtio_net_hdr_mrg_rxbuf
void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn);
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry. Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+ uint8_t class;
+ uint8_t cmd;
+};
+
+typedef uint8_t virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK 0
+#define VIRTIO_NET_ERR 1
+
#endif
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
