Re: [PATCH v3 12/15] KVM: arm64: Make block->table PTE changes parallel-aware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 27, 2022 at 10:22:47PM +0000, Oliver Upton wrote:
> In order to service stage-2 faults in parallel, stage-2 table walkers
> must take exclusive ownership of the PTE being worked on. An additional
> requirement of the architecture is that software must perform a
> 'break-before-make' operation when changing the block size used for
> mapping memory.
> 
> Roll these two concepts together into helpers for performing a
> 'break-before-make' sequence. Use a special PTE value to indicate a PTE
> has been locked by a software walker. Additionally, use an atomic
> compare-exchange to 'break' the PTE when the stage-2 page tables are
> possibly shared with another software walker. Elide the DSB + TLBI if
> the evicted PTE was invalid (and thus not subject to break-before-make).
> 
> All of the atomics do nothing for now, as the stage-2 walker isn't fully
> ready to perform parallel walks.
> 
> Signed-off-by: Oliver Upton <oliver.upton@xxxxxxxxx>
> ---
>  arch/arm64/kvm/hyp/pgtable.c | 82 +++++++++++++++++++++++++++++++++---
>  1 file changed, 76 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
> index 4c579b3beabf..1df858c21b2e 100644
> --- a/arch/arm64/kvm/hyp/pgtable.c
> +++ b/arch/arm64/kvm/hyp/pgtable.c
> @@ -49,6 +49,12 @@
>  #define KVM_INVALID_PTE_OWNER_MASK	GENMASK(9, 2)
>  #define KVM_MAX_OWNER_ID		1
>  
> +/*
> + * Used to indicate a pte for which a 'break-before-make' sequence is in
> + * progress.
> + */
> +#define KVM_INVALID_PTE_LOCKED		BIT(10)
> +
>  struct kvm_pgtable_walk_data {
>  	struct kvm_pgtable_walker	*walker;
>  
> @@ -674,6 +680,11 @@ static bool stage2_pte_is_counted(kvm_pte_t pte)
>  	return !!pte;
>  }
>  
> +static bool stage2_pte_is_locked(kvm_pte_t pte)
> +{
> +	return !kvm_pte_valid(pte) && (pte & KVM_INVALID_PTE_LOCKED);
> +}
> +
>  static bool stage2_try_set_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t new)
>  {
>  	if (!kvm_pgtable_walk_shared(ctx)) {
> @@ -684,6 +695,64 @@ static bool stage2_try_set_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_
>  	return cmpxchg(ctx->ptep, ctx->old, new) == ctx->old;
>  }
>  
> +/**
> + * stage2_try_break_pte() - Invalidates a pte according to the
> + *			    'break-before-make' requirements of the
> + *			    architecture.
> + *
> + * @ctx: context of the visited pte.
> + * @data: stage-2 map data
> + *
> + * Returns: true if the pte was successfully broken.
> + *
> + * If the removed pte was valid, performs the necessary serialization and TLB
> + * invalidation for the old value. For counted ptes, drops the reference count
> + * on the containing table page.
> + */
> +static bool stage2_try_break_pte(const struct kvm_pgtable_visit_ctx *ctx,
> +				 struct stage2_map_data *data)

Would it be possible to pass "kvm_s2_mmu *mmu" directly (instead of
"stage2_map_data *data")? so this function can be reused by other
walkers.  Another option would be to stash "struct kvm_s2_mmu" in
"struct kvm_pgtable_visit_ctx".

> +{
> +	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
> +
> +	if (stage2_pte_is_locked(ctx->old)) {
> +		/*
> +		 * Should never occur if this walker has exclusive access to the
> +		 * page tables.
> +		 */
> +		WARN_ON(!kvm_pgtable_walk_shared(ctx));
> +		return false;
> +	}
> +
> +	if (!stage2_try_set_pte(ctx, KVM_INVALID_PTE_LOCKED))
> +		return false;
> +
> +	/*
> +	 * Perform the appropriate TLB invalidation based on the evicted pte
> +	 * value (if any).
> +	 */
> +	if (kvm_pte_table(ctx->old, ctx->level))
> +		kvm_call_hyp(__kvm_tlb_flush_vmid, data->mmu);
> +	else if (kvm_pte_valid(ctx->old))
> +		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, data->mmu, ctx->addr, ctx->level);
> +
> +	if (stage2_pte_is_counted(ctx->old))
> +		mm_ops->put_page(ctx->ptep);
> +
> +	return true;
> +}
> +
> +static void stage2_make_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t new)
> +{
> +	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
> +
> +	WARN_ON(!stage2_pte_is_locked(*ctx->ptep));
> +
> +	if (stage2_pte_is_counted(new))
> +		mm_ops->get_page(ctx->ptep);
> +
> +	smp_store_release(ctx->ptep, new);
> +}
> +
>  static void stage2_put_pte(const struct kvm_pgtable_visit_ctx *ctx, struct kvm_s2_mmu *mmu,
>  			   struct kvm_pgtable_mm_ops *mm_ops)
>  {
> @@ -795,7 +864,7 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
>  				struct stage2_map_data *data)
>  {
>  	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
> -	kvm_pte_t *childp;
> +	kvm_pte_t *childp, new;
>  	int ret;
>  
>  	ret = stage2_map_walker_try_leaf(ctx, data);
> @@ -812,17 +881,18 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
>  	if (!childp)
>  		return -ENOMEM;
>  
> +	if (!stage2_try_break_pte(ctx, data)) {
> +		mm_ops->put_page(childp);
> +		return -EAGAIN;
> +	}
> +
>  	/*
>  	 * If we've run into an existing block mapping then replace it with
>  	 * a table. Accesses beyond 'end' that fall within the new table
>  	 * will be mapped lazily.
>  	 */
> -	if (stage2_pte_is_counted(ctx->old))
> -		stage2_put_pte(ctx, data->mmu, mm_ops);
> -
>  	new = kvm_init_table_pte(childp, mm_ops);
> -	mm_ops->get_page(ctx->ptep);
> -	smp_store_release(ctx->ptep, new);
> +	stage2_make_pte(ctx, new);
>  
>  	return 0;
>  }
> -- 
> 2.38.1.273.g43a17bfeac-goog
> 
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux