Re: [RFC v3 17/21] iommu/smmuv3: Report non recoverable faults

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/01/2019 10:26, Eric Auger wrote:
> When a stage 1 related fault event is read from the event queue,
> let's propagate it to potential external fault listeners, ie. users
> who registered a fault handler.
> 
> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
> ---
>  drivers/iommu/arm-smmu-v3.c | 124 ++++++++++++++++++++++++++++++++----
>  1 file changed, 113 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index 999ee470a2ae..6a711cbbb228 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -168,6 +168,26 @@
>  #define ARM_SMMU_PRIQ_IRQ_CFG1		0xd8
>  #define ARM_SMMU_PRIQ_IRQ_CFG2		0xdc
>  
> +/* Events */
> +#define ARM_SMMU_EVT_F_UUT		0x01
> +#define ARM_SMMU_EVT_C_BAD_STREAMID	0x02
> +#define ARM_SMMU_EVT_F_STE_FETCH	0x03
> +#define ARM_SMMU_EVT_C_BAD_STE		0x04
> +#define ARM_SMMU_EVT_F_BAD_ATS_TREQ	0x05
> +#define ARM_SMMU_EVT_F_STREAM_DISABLED	0x06
> +#define ARM_SMMU_EVT_F_TRANSL_FORBIDDEN	0x07
> +#define ARM_SMMU_EVT_C_BAD_SUBSTREAMID	0x08
> +#define ARM_SMMU_EVT_F_CD_FETCH		0x09
> +#define ARM_SMMU_EVT_C_BAD_CD		0x0a
> +#define ARM_SMMU_EVT_F_WALK_EABT	0x0b
> +#define ARM_SMMU_EVT_F_TRANSLATION	0x10
> +#define ARM_SMMU_EVT_F_ADDR_SIZE	0x11
> +#define ARM_SMMU_EVT_F_ACCESS		0x12
> +#define ARM_SMMU_EVT_F_PERMISSION	0x13
> +#define ARM_SMMU_EVT_F_TLB_CONFLICT	0x20
> +#define ARM_SMMU_EVT_F_CFG_CONFLICT	0x21
> +#define ARM_SMMU_EVT_E_PAGE_REQUEST	0x24
> +
>  /* Common MSI config fields */
>  #define MSI_CFG0_ADDR_MASK		GENMASK_ULL(51, 2)
>  #define MSI_CFG2_SH			GENMASK(5, 4)
> @@ -333,6 +353,11 @@
>  #define EVTQ_MAX_SZ_SHIFT		7
>  
>  #define EVTQ_0_ID			GENMASK_ULL(7, 0)
> +#define EVTQ_0_SUBSTREAMID		GENMASK_ULL(31, 12)
> +#define EVTQ_0_STREAMID			GENMASK_ULL(63, 32)
> +#define EVTQ_1_S2			GENMASK_ULL(39, 39)
> +#define EVTQ_1_CLASS			GENMASK_ULL(40, 41)
> +#define EVTQ_3_FETCH_ADDR		GENMASK_ULL(51, 3)
>  
>  /* PRI queue */
>  #define PRIQ_ENT_DWORDS			2
> @@ -1270,7 +1295,6 @@ static int arm_smmu_init_l2_strtab(struct arm_smmu_device *smmu, u32 sid)
>  	return 0;
>  }
>  
> -__maybe_unused
>  static struct arm_smmu_master_data *
>  arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid)
>  {
> @@ -1296,24 +1320,102 @@ arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid)
>  	return master;
>  }
>  
> +static void arm_smmu_report_event(struct arm_smmu_device *smmu, u64 *evt)
> +{
> +	u64 fetch_addr = FIELD_GET(EVTQ_3_FETCH_ADDR, evt[3]);
> +	u32 sid = FIELD_GET(EVTQ_0_STREAMID, evt[0]);
> +	bool s1 = !FIELD_GET(EVTQ_1_S2, evt[1]);
> +	u8 type = FIELD_GET(EVTQ_0_ID, evt[0]);
> +	struct arm_smmu_master_data *master;
> +	struct iommu_fault_event event;
> +	bool propagate = true;
> +	u64 addr = evt[2];
> +	int i;
> +
> +	master = arm_smmu_find_master(smmu, sid);
> +	if (WARN_ON(!master))
> +		return;
> +
> +	event.fault.type = IOMMU_FAULT_DMA_UNRECOV;
> +
> +	switch (type) {
> +	case ARM_SMMU_EVT_C_BAD_STREAMID:
> +		event.fault.reason = IOMMU_FAULT_REASON_SOURCEID_INVALID;
> +		break;
> +	case ARM_SMMU_EVT_F_STREAM_DISABLED:
> +	case ARM_SMMU_EVT_C_BAD_SUBSTREAMID:
> +		event.fault.reason = IOMMU_FAULT_REASON_PASID_INVALID;
> +		break;
> +	case ARM_SMMU_EVT_F_CD_FETCH:
> +		event.fault.reason = IOMMU_FAULT_REASON_PASID_FETCH;
> +		break;
> +	case ARM_SMMU_EVT_F_WALK_EABT:
> +		event.fault.reason = IOMMU_FAULT_REASON_WALK_EABT;
> +		event.fault.addr = addr;
> +		event.fault.fetch_addr = fetch_addr;
> +		propagate = s1;
> +		break;
> +	case ARM_SMMU_EVT_F_TRANSLATION:
> +		event.fault.reason = IOMMU_FAULT_REASON_PTE_FETCH;
> +		event.fault.addr = addr;
> +		event.fault.fetch_addr = fetch_addr;
> +		propagate = s1;
> +		break;
> +	case ARM_SMMU_EVT_F_PERMISSION:
> +		event.fault.reason = IOMMU_FAULT_REASON_PERMISSION;
> +		event.fault.addr = addr;
> +		propagate = s1;
> +		break;
> +	case ARM_SMMU_EVT_F_ACCESS:
> +		event.fault.reason = IOMMU_FAULT_REASON_ACCESS;
> +		event.fault.addr = addr;
> +		propagate = s1;
> +		break;
> +	case ARM_SMMU_EVT_C_BAD_STE:
> +		event.fault.reason = IOMMU_FAULT_REASON_BAD_DEVICE_CONTEXT_ENTRY;
> +		break;
> +	case ARM_SMMU_EVT_C_BAD_CD:
> +		event.fault.reason = IOMMU_FAULT_REASON_BAD_PASID_ENTRY;
> +		break;
> +	case ARM_SMMU_EVT_F_ADDR_SIZE:
> +		event.fault.reason = IOMMU_FAULT_REASON_OOR_ADDRESS;
> +		propagate = s1;
> +		break;
> +	case ARM_SMMU_EVT_F_STE_FETCH:
> +		event.fault.reason = IOMMU_FAULT_REASON_DEVICE_CONTEXT_FETCH;
> +		event.fault.fetch_addr = fetch_addr;
> +		break;
> +	/* End of addition */
> +	case ARM_SMMU_EVT_E_PAGE_REQUEST:
> +	case ARM_SMMU_EVT_F_TLB_CONFLICT:
> +	case ARM_SMMU_EVT_F_CFG_CONFLICT:
> +	case ARM_SMMU_EVT_F_BAD_ATS_TREQ:
> +	case ARM_SMMU_EVT_F_TRANSL_FORBIDDEN:
> +	case ARM_SMMU_EVT_F_UUT:
> +	default:
> +		event.fault.reason = IOMMU_FAULT_REASON_UNKNOWN;
> +	}
> +	/* only propagate the error if it relates to stage 1 */
> +	if (s1)

if (propagate)

But I don't quite understand how we're deciding what to propagate: a
C_BAD_STE is most likely a bug in the SMMU driver, but is reported to
userspace. On the other hand a stage-2 F_TRANSLATION is likely an error
from the VMM (didn't setup stage-2 mappings properly), but we're not
reporting it. Maybe we should add a bit to event.fault that tells
whether the fault was stage 1 or 2, and let the VMM deal with it?

> +		iommu_report_device_fault(master->dev, &event);

We should return here if the fault is successfully injected

Thanks,
Jean

> +
> +	dev_info(smmu->dev, "event 0x%02x received:\n", type);
> +	for (i = 0; i < EVTQ_ENT_DWORDS; ++i) {
> +		dev_info(smmu->dev, "\t0x%016llx\n",
> +			 (unsigned long long)evt[i]);
> +	}
> +}
> +
>  /* IRQ and event handlers */
>  static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)
>  {
> -	int i;
>  	struct arm_smmu_device *smmu = dev;
>  	struct arm_smmu_queue *q = &smmu->evtq.q;
>  	u64 evt[EVTQ_ENT_DWORDS];
>  
>  	do {
> -		while (!queue_remove_raw(q, evt)) {
> -			u8 id = FIELD_GET(EVTQ_0_ID, evt[0]);
> -
> -			dev_info(smmu->dev, "event 0x%02x received:\n", id);
> -			for (i = 0; i < ARRAY_SIZE(evt); ++i)
> -				dev_info(smmu->dev, "\t0x%016llx\n",
> -					 (unsigned long long)evt[i]);
> -
> -		}
> +		while (!queue_remove_raw(q, evt))
> +			arm_smmu_report_event(smmu, evt);
>  
>  		/*
>  		 * Not much we can do on overflow, so scream and pretend we're
> 

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux