This series allows a virtualizer to program the nested stage mode. This is useful when both the host and the guest are exposed with an SMMUv3 and a PCI device is assigned to the guest using VFIO. In this mode, the physical IOMMU must be programmed to translate the two stages: the one set up by the guest (IOVA -> GPA) and the one set up by the host VFIO driver as part of the assignment process (GPA -> HPA). On Intel, this is traditionnaly achieved by combining the 2 stages into a single physical stage. However this relies on the capability to trap on each guest translation structure update. This is possible by using the VTD Caching Mode. Unfortunately the ARM SMMUv3 does not offer a similar mechanism. However, the ARM SMMUv3 architecture supports 2 physical stages! Those were devised exactly with that use case in mind. Assuming the HW implements both stages (optional), the guest now can use stage 1 while the host uses stage 2. This assumes the virtualizer has means to propagate guest settings to the host SMMUv3 driver. This series brings this VFIO/IOMMU infrastructure. Those services are: - bind the guest stage 1 configuration to the stream table entry - propagate guest TLB invalidations - bind MSI IOVAs - propagate faults collected at physical level up to the virtualizer This series largely reuses the user API and infrastructure originally devised for SVA/SVM and patches submitted by Jacob, Yi Liu, Tianyu in [1-2] and Jean-Philippe [3-4]. Best Regards Eric This series can be found at: https://github.com/eauger/linux/tree/v5.0-rc1-2stage-rfc-v3 This was tested on Qualcomm HW featuring SMMUv3 and with adapted QEMU vSMMUv3. References: [1] [PATCH v5 00/23] IOMMU and VT-d driver support for Shared Virtual Address (SVA) https://lwn.net/Articles/754331/ [2] [RFC PATCH 0/8] Shared Virtual Memory virtualization for VT-d (VFIO part) https://lists.linuxfoundation.org/pipermail/iommu/2017-April/021475.html [3] [v2,00/40] Shared Virtual Addressing for the IOMMU https://patchwork.ozlabs.org/cover/912129/ [4] [PATCH v3 00/10] Shared Virtual Addressing for the IOMMU https://patchwork.kernel.org/cover/10608299/ History: v2 -> v3: - When registering the S1 MSI binding we now store the device handle. This addresses Robin's comment about discimination of devices beonging to different S1 groups and using different physical MSI doorbells. - Change the fault reporting API: use VFIO_PCI_DMA_FAULT_IRQ_INDEX to set the eventfd and expose the faults through an mmappable fault region v1 -> v2: - Added the fault reporting capability - asid properly passed on invalidation (fix assignment of multiple devices) - see individual change logs for more info Eric Auger (12): iommu: Introduce bind_guest_msi vfio: VFIO_IOMMU_BIND_MSI iommu/smmuv3: Get prepared for nested stage support iommu/smmuv3: Implement set_pasid_table iommu/smmuv3: Implement cache_invalidate dma-iommu: Implement NESTED_MSI cookie iommu/smmuv3: Implement bind_guest_msi iommu/smmuv3: Report non recoverable faults vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type vfio-pci: Register an iommu fault handler vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX vfio: Document nested stage control Jacob Pan (4): iommu: Introduce set_pasid_table API iommu: introduce device fault data driver core: add per device iommu param iommu: introduce device fault report API Jean-Philippe Brucker (2): iommu/arm-smmu-v3: Link domains and devices iommu/arm-smmu-v3: Maintain a SID->device structure Liu, Yi L (3): iommu: Introduce cache_invalidate API vfio: VFIO_IOMMU_SET_PASID_TABLE vfio: VFIO_IOMMU_CACHE_INVALIDATE Documentation/vfio.txt | 62 ++++ drivers/iommu/arm-smmu-v3.c | 460 ++++++++++++++++++++++++++-- drivers/iommu/dma-iommu.c | 112 ++++++- drivers/iommu/iommu.c | 187 ++++++++++- drivers/vfio/pci/vfio_pci.c | 147 ++++++++- drivers/vfio/pci/vfio_pci_intrs.c | 19 ++ drivers/vfio/pci/vfio_pci_private.h | 3 + drivers/vfio/vfio_iommu_type1.c | 105 +++++++ include/linux/device.h | 3 + include/linux/dma-iommu.h | 11 + include/linux/iommu.h | 127 +++++++- include/uapi/linux/iommu.h | 234 ++++++++++++++ include/uapi/linux/vfio.h | 38 +++ 13 files changed, 1476 insertions(+), 32 deletions(-) create mode 100644 include/uapi/linux/iommu.h -- 2.17.2 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
