On Tuesday 01 July 2014 09:28 PM, Russell King wrote:
> ARMv6 and greater introduced a new instruction ("bx") which can be used
> to return from function calls. Recent CPUs perform better when the
> "bx lr" instruction is used rather than the "mov pc, lr" instruction,
> and this sequence is strongly recommended to be used by the ARM
> architecture manual (section A.4.1.1).
>
> We provide a new macro "ret" with all its variants for the condition
> code which will resolve to the appropriate instruction.
>
> Rather than doing this piecemeal, and miss some instances, change all
> the "mov pc" instances to use the new macro, with the exception of
> the "movs" instruction and the kprobes code. This allows us to detect
> the "mov pc, lr" case and fix it up - and also gives us the possibility
> of deploying this for other registers depending on the CPU selection.
>
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/mach-davinci/sleep.S | 2 +-
I build, boot and suspend-to-RAM tested on DA850 which should exercise
the path you modified. DaVinci devices are ARMv5 (ARM926) so the new bx
instruction does not really get used.
Acked-by: Sekhar Nori <nsekhar@xxxxxx>
Thanks,
Sekhar
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
