On Thu 30-11-23 21:33:04, Pingfan Liu wrote:
> On Thu, Nov 30, 2023 at 9:29 PM Michal Hocko <mhocko@xxxxxxxx> wrote:
> >
> > On Thu 30-11-23 20:04:59, Baoquan He wrote:
> > > On 11/30/23 at 11:16am, Michal Hocko wrote:
> > > > On Thu 30-11-23 11:00:48, Baoquan He wrote:
> > > > [...]
> > > > > Now, we are worried if there's risk if the CMA area is retaken into kdump
> > > > > kernel as system RAM. E.g is it possible that 1st kernel's ongoing RDMA
> > > > > or DMA will interfere with kdump kernel's normal memory accessing?
> > > > > Because kdump kernel usually only reset and initialize the needed
> > > > > device, e.g dump target. Those unneeded devices will be unshutdown and
> > > > > let go.
> > > >
> > > > I do not really want to discount your concerns but I am bit confused why
> > > > this matters so much. First of all, if there is a buggy RDMA driver
> > > > which doesn't use the proper pinning API (which would migrate away from
> > > > the CMA) then what is the worst case? We will get crash kernel corrupted
> > > > potentially and fail to take a proper kernel crash, right? Is this
> > > > worrisome? Yes. Is it a real roadblock? I do not think so. The problem
> > > > seems theoretical to me and it is not CMA usage at fault here IMHO. It
> > > > is the said theoretical driver that needs fixing anyway.
> > > >
> > > > Now, it is really fair to mention that CMA backed crash kernel memory
> > > > has some limitations
> > > > - CMA reservation can only be used by the userspace in the
> > > > primary kernel. If the size is overshot this might have
> > > > negative impact on kernel allocations
> > > > - userspace memory dumping in the crash kernel is fundamentally
> > > > incomplete.
> > >
> > > I am not sure if we are talking about the same thing. My concern is:
> > > ====================================================================
> > > 1) system corrutption happened, crash dumping is prepared, cpu and
> > > interrupt controllers are shutdown;
> > > 2) all pci devices are kept alive;
> > > 3) kdump kernel boot up, initialization is only done on those devices
> > > which drivers are added into kdump kernel's initrd;
> > > 4) those on-flight DMA engine could be still working if their kernel
> > > module is not loaded;
> > >
> > > In this case, if the DMA's destination is located in crashkernel=,cma
> > > region, the DMA writting could continue even when kdump kernel has put
> > > important kernel data into the area. Is this possible or absolutely not
> > > possible with DMA, RDMA, or any other stuff which could keep accessing
> > > that area?
> >
> > I do nuderstand your concern. But as already stated if anybody uses
> > movable memory (CMA including) as a target of {R}DMA then that memory
> > should be properly pinned. That would mean that the memory will be
> > migrated to somewhere outside of movable (CMA) memory before the
> > transfer is configured. So modulo bugs this shouldn't really happen.
> > Are there {R}DMA drivers that do not pin memory correctly? Possibly. Is
> > that a road bloack to not using CMA to back crash kernel memory, I do
> > not think so. Those drivers should be fixed instead.
> >
> I think that is our concern. Is there any method to guarantee that
> will not happen instead of 'should be' ?
> Any static analysis during compiling time or dynamic checking method?
I am not aware of any method to detect a driver is going to configure a
RDMA.
> If this can be resolved, I think this method is promising.
Are you indicating this is a mandatory prerequisite?
--
Michal Hocko
SUSE Labs
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
