Re: [PATCHv3 00/14] x86/tdx: Add kexec support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/17/23 at 06:46pm, Kirill A. Shutemov wrote:
> On Fri, Nov 17, 2023 at 11:03:00PM +0800, Baoquan He wrote:
> > On 11/17/23 at 03:47pm, Kirill A. Shutemov wrote:
> > > On Thu, Nov 16, 2023 at 10:45:23PM +0800, Baoquan He wrote:
> > > > On 11/16/23 at 10:17pm, Baoquan He wrote:
> > > > > On 11/16/23 at 03:56pm, Kirill A. Shutemov wrote:
> > > > > > On Thu, Nov 16, 2023 at 08:10:47PM +0800, Baoquan He wrote:
> > > > > > > On 11/15/23 at 03:00pm, Kirill A. Shutemov wrote:
> > > > > > > > The patchset adds bits and pieces to get kexec (and crashkernel) work on
> > > > > > > > TDX guest.
> > > > > > > 
> > > > > > > I finally got a machine of intel-eaglestream-spr as host and built a
> > > > > > > tdx guest to give it a shot, the kexec reboot is working very well,
> > > > > > > while kdump kernel always failed to boot up. I only built kernel and
> > > > > > > installed it on tdx guest.
> > > > > > > ------------------------------------------
> > > > > > > [    1.422500] Run /init as init process
> > > > > > > [    1.423073] Failed to execute /init (error -2)
> > > > > > > [    1.423759] Run /sbin/init as init process
> > > > > > > [    1.424370] Run /etc/init as init process
> > > > > > > [    1.424969] Run /bin/init as init process
> > > > > > > [    1.425588] Run /bin/sh as init process
> > > > > > > [    1.426150] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
> > > > > > > [    1.428122] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-00014-gbdba31ba3cec #3
> > > > > > > [    1.429232] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022
> > > > > > > [    1.430328] Call Trace:
> > > > > > > [    1.430717]  <TASK>
> > > > > > > [    1.431041]  dump_stack_lvl+0x33/0x50
> > > > > > > [    1.431581]  panic+0x324/0x340
> > > > > > > [    1.432037]  ? __pfx_kernel_init+0x10/0x10
> > > > > > > [    1.432629]  kernel_init+0x174/0x1c0
> > > > > > > [    1.433149]  ret_from_fork+0x2d/0x50
> > > > > > > [    1.433690]  ? __pfx_kernel_init+0x10/0x10
> > > > > > > [    1.434277]  ret_from_fork_asm+0x1b/0x30
> > > > > > > [    1.434850]  </TASK>
> > > > > > > [    1.435345] Kernel Offset: disabled
> > > > > > > [    1.439216] Rebooting in 10 seconds..
> > > > > > > qemu-kvm: cpus are not resettable, terminating
> > > > > > 
> > > > > > Could you shared your kernel config and details about your setup (qemu
> > > > > > command, kernel command line, ...)?
> > > > > 
> > > > > We followed tdx-tools README to setup the environment and built host and
> > > > > guest kernel, qemu command is as below. I copied the
> > > > > tdx-tools/build/rhel-9/intel-mvp-tdx-kernel/tdx-base.config to the
> > > > > latest upstream linxu kernel then execute 'make olddefconfig'. Because
> > > > > your patchset can't be applied to the stable kernel with the 731
> > > > > patches.
> > > > > 
> > > > > cd /home/root/tdx-tools
> > > > > ./start-qemu.sh -i /home/root/guest_tdx.qcow2 -b grub
> > > > 
> > > > This is the qemu command when execute above line of command, just for
> > > > your reference if you happen to not take this way.
> > > 
> > > Still failed to reproduce :/
> > > 
> > > Blind shot: could you check if the patch below makes any difference.
> > 
> > Still failed. And I found the normal reboot does't work either. I will
> > do more testing tomorrow, e.g use the tdx-tools's own rhel9 kernel
> > config and rebuild, and update host kernel too.

I did more tests, resuls are summarized as below: 

1) kexec reboot works, but always fallback to 1 cpu even though multiple
cpus are specified;
2) kdump kernel need more crashkernel memory to boot up,
   crashkernel=512M works well in our case. But it failed in vmcore
   saving process, either makedumpfile or cp can't access the 1st
   kernel's old memory;
3) Normal reboot always failed;

My colleague Tao helped to double check this, he got the same testing result.
Plesae 
1) what can we do to enable the multiple cpu support for kexec reboot?
2) anything missing to allow makedumpfile/cp access 1st kernel's memory?
3) not sure if this is particular case on the system we tested on.

Thanks
Baoquan


_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux