On 11/16/23 at 10:17pm, Baoquan He wrote: > On 11/16/23 at 03:56pm, Kirill A. Shutemov wrote: > > On Thu, Nov 16, 2023 at 08:10:47PM +0800, Baoquan He wrote: > > > On 11/15/23 at 03:00pm, Kirill A. Shutemov wrote: > > > > The patchset adds bits and pieces to get kexec (and crashkernel) work on > > > > TDX guest. > > > > > > I finally got a machine of intel-eaglestream-spr as host and built a > > > tdx guest to give it a shot, the kexec reboot is working very well, > > > while kdump kernel always failed to boot up. I only built kernel and > > > installed it on tdx guest. > > > ------------------------------------------ > > > [ 1.422500] Run /init as init process > > > [ 1.423073] Failed to execute /init (error -2) > > > [ 1.423759] Run /sbin/init as init process > > > [ 1.424370] Run /etc/init as init process > > > [ 1.424969] Run /bin/init as init process > > > [ 1.425588] Run /bin/sh as init process > > > [ 1.426150] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. > > > [ 1.428122] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-00014-gbdba31ba3cec #3 > > > [ 1.429232] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 > > > [ 1.430328] Call Trace: > > > [ 1.430717] <TASK> > > > [ 1.431041] dump_stack_lvl+0x33/0x50 > > > [ 1.431581] panic+0x324/0x340 > > > [ 1.432037] ? __pfx_kernel_init+0x10/0x10 > > > [ 1.432629] kernel_init+0x174/0x1c0 > > > [ 1.433149] ret_from_fork+0x2d/0x50 > > > [ 1.433690] ? __pfx_kernel_init+0x10/0x10 > > > [ 1.434277] ret_from_fork_asm+0x1b/0x30 > > > [ 1.434850] </TASK> > > > [ 1.435345] Kernel Offset: disabled > > > [ 1.439216] Rebooting in 10 seconds.. > > > qemu-kvm: cpus are not resettable, terminating > > > > Could you shared your kernel config and details about your setup (qemu > > command, kernel command line, ...)? > > We followed tdx-tools README to setup the environment and built host and > guest kernel, qemu command is as below. I copied the > tdx-tools/build/rhel-9/intel-mvp-tdx-kernel/tdx-base.config to the > latest upstream linxu kernel then execute 'make olddefconfig'. Because > your patchset can't be applied to the stable kernel with the 731 > patches. > > cd /home/root/tdx-tools > ./start-qemu.sh -i /home/root/guest_tdx.qcow2 -b grub This is the qemu command when execute above line of command, just for your reference if you happen to not take this way. [root@intel-eaglestream-spr-03 tdx-tools]# ./start-qemu.sh -i /home/root/guest_tdx.qcow2 -b grub WARN: Using HVC console for grub, could not accept key input in grub menu ========================================= Guest Image : /home/root/guest_tdx.qcow2 Kernel binary : OVMF : /usr/share/qemu/OVMF.fd VM Type : td CPUS : 1 Boot type : grub Monitor port : 9001 Enable vsock : false Enable debug : false Console : HVC ========================================= Remapping CTRL-C to CTRL-] Launch VM: /usr/libexec/qemu-kvm -accel kvm -name process=tdxvm,debug-threads=on -m 2G -vga none -monitor pty -no-hpet -nodefaults -drive file=/home/root/guest_tdx.qcow2,if=virtio,format=qcow2 -monitor telnet:127.0.0.1:9001,server,nowait -bios /usr/share/qemu/OVMF.fd -object tdx-guest,sept-ve-disable=on,id=tdx -object memory-backend-memfd-private,id=ram1,size=2G -cpu host,-kvm-steal-time,pmu=off -machine q35,kernel_irqchip=split,confidential-guest-support=tdx,memory-backend=ram1 -device virtio-net-pci,netdev=mynet0 -netdev user,id=mynet0,net=10.0.2.0/24,dhcpstart=10.0.2.15,hostfwd=tcp::10026-:22 -smp 1 -chardev stdio,id=mux,mux=on,logfile=/home/root/tdx-tools/vm_log_2023-11-16T0658.log -device virtio-serial,romfile= -device virtconsole,chardev=mux -monitor chardev:mux -serial chardev:mux -nographic char device redirected to /dev/pts/1 (label compat_monitor0) _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
