Hi Milton,
My suggestions:
Milton Miller wrote:
> The __kdump_flag ABI is overly constraining for future development.
>
> As of 2.6.27, the kernel entry point has 4 constraints: Offset 0 is
> the starting point for the master (boot) cpu (entered with r3 pointing
> to the device tree structure), offset 0x60 is code for the slave cpus
> (entered with r3 set to their device tree physical id), offset 0x20 is
> used by the iseries hypervisor, and secondary cpus must be well behaved
> when the first 256 bytes are copied to address 0.
>
> Placing the __kdump_flag at 0x18 is bad because:
>
> - It was taking the last 8 bytes before the iseries hypervisor data.
> - It was 8 bytes for a boolean flag
> - It had no way of identifying that the flag was present
> - It does leave any room for the master to add any additional code
> before branching, which hurts debug.
> - It will be unnecessarily hard for 32 bit code to be common (8 bytes)
>
> Now that we have eliminated the use of __kdump_flag in favor of
> the standard is_kdump_kernel(), this flag only controls run without
> relocating the kernel to PHYSICAL_START (0), so rename it __run_at_load.
>
We could try both of our approaches. Instead of passing the information
that next kernel should be relocatable from kexec_sequence to purgatory
code, we will do it from kexec-tools path (following your approach). But
instead of setting the __run_at_load value in the purgatory code (ie at
physical address 0x5c), we will set the variable __run_at_load at kernel
image itself.
i.e.,
[code snip 1]
lwz r7,__run_at_load-_stext(r26)
cmplwi cr0,r7,1 /* kdump kernel ? - stay where we are */
bne 1f
add r25,r25,r26
lwz r7,__run_at_load-_stext(r26)
cmplwi cr0,r7,1
bne 3f
kexec-tools
[code snip 2]
LOADADDR(6,run_at_load)
ld 18,0(6)
cmpd 18,1
bne skip
li 7,1
stw 7,92(4) # mark __run_at_load flag at kernel
skip:
lwz 7,0(4) # get the first instruction that we stole
stw 7,0(0) # and put it in the slave loop at 0
# skip cache flush, do we care?
[code snip 3]
if (info->kexec_flags & KEXEC_ON_CRASH) {
....
elf_rel_set_symbol(&info->rhdr, "run_at_load",
&my_run_at_load,
sizeof(my_run_at_load));
}
Using this approach we are not breaking the kexec_sequence ABI and we
directly modifying the flag in kernel image.
Regards,
Mohan.
