Hello Willy, On 1/2/09, Willy Tarreau <w@xxxxxx> wrote: > On Fri, Jan 02, 2009 at 08:10:50PM +0530, Jaswinder Singh Rajput wrote: >> Now I tested fealnx driver from 2.4.37 (2.4 git). I am still getting >> "NETDEV WATCHDOG: eth0: transmit timed out". Please let me know how >> can I fix this problem. > > Well, I don't have such an adapter, but most of the times I encountered > a similar message with older 10/100 adapters, it was caused by a link > status issue or duplex mismatch. > I think I am also getting same problem, what is the solution. > Could you check with ethtool or mii-diag that the link status is correct > and 100 Mbps/Full duplex (assuming you're connected to a switch) ? > Output of mii-diag -v : eth0: 10 Mbit, half duplex, no link product info: vendor 00:00:00, model 0 rev 0 basic mode: 10 Mbit, half duplex basic status: no link capabilities: advertising: This is the output from very old machine Pentium MMX with Redhat 7.1 I also tested different RTL8139 adapters on different machines with different kernels and different kind of switches and Hubs but I get same error on all the machines. But my other Network devices are working perfectly. Thank you, JSR -- To unsubscribe from this list: send the line "unsubscribe kernel-testers" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
