On Sat, 2008-10-25 at 22:45 +0200, Alexey Fisher wrote:
> On Saturday 25 October 2008 15:55:12 John W. Linville wrote:
> > On Sat, Oct 25, 2008 at 01:03:34PM +0200, Rafael J. Wysocki wrote:
> > > On Saturday, 25 of October 2008, Alexey Fisher wrote:
> > > > May be this is the wrong plase to ask.
> > >
> > > Yeah, better ask that on linux-wireless@xxxxxxxxxxxxxxx (CCed).
> > >
> > > > The question is: Why differnet wlan drivers use different settings to
> > > > stay silent - powered on but not trying to associate to any accespoint?
> > > > For example: ipw2200 - if wlan was connfigured like:
> > > >
> > > > iwconfig wlan1 essid "my-ap" chan 6 ap my:aps:mac ?key s:pass
> > > >
> > > > this will normaly connect to my secure ?AP. and if i set after this:
> > > > ?
> > > > iwconfig wlan1 essid off ap off
> > > >
> > > > it will connect to unsecure AP of my neighbour or of Dr.Evil :)
> > > > to disable association on ipw2200 i need to set all this and plus "chan
> > > > 0". With this cnowleg i want to set up iwl3945, and surprise it's not
> > > > working. This driver do not accepted "chan 0" and instead of "essid
> > > > off" it did "essid """
> > > >
> > > > Are there any unified way to keep adapter powered on but not trying to
> > > > associate to some AP?
> >
> > That is from the bad-ole-days. I could be wrong, but AFAIK only the
> > ipw2x00 drivers do that anyway. I recently merged a patch to change
> > the default for that for ipw2200 into wireless-testing. We should
> > probably have one for ipw2100 as well.
> >
> > Anyway, there are module options for those. Add "options ipw2200
> > associate=0" to /etc/modprobe.conf.
>
> I use associate=0 with smole workaround:
>
> diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
> index dcce354..92583c6 100644
> --- a/drivers/net/wireless/ipw2200.c
> +++ b/drivers/net/wireless/ipw2200.c
> @@ -7582,7 +7582,7 @@ static int ipw_associate(void *data)
>
> if (!(priv->config & CFG_ASSOCIATE) &&
> !(priv->config & (CFG_STATIC_ESSID |
> - CFG_STATIC_CHANNEL | CFG_STATIC_BSSID))) {
> + CFG_STATIC_BSSID))) {
> IPW_DEBUG_ASSOC("Not attempting association (associate=0)\n");
> return 0;
> }
Yeah, that's probably appropriate, otherwise just 'iwconfig eth1 channel
6' would trigger association to _something_, which is wrong. Changing
the channel should (and does) trigger reassociation, but only if there
is an SSID to associate with!
In plain english, this if statement should read:
"If associate=0, and no locked SSID or locked BSSID have been set, don't
associate"
> becouse networkmanager do not set channel=0 to be compartibel with other
> drivers.
wpa_supplicant sets (or doesn't set) the channel, not NM...
Care to submit a patch with the appropriate signed-off-by tag?
Thanks!
Dan
--
To unsubscribe from this list: send the line "unsubscribe kernel-testers" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
