I'm having some trouble getting beyond 1024x768 resolution on my IBM T22 laptop running FreeBSD 6.0 and KDE 3.5.
Just installing KDE I get this resolution just fine, but when I try and add 1280x1024 "mode" in the xorg.conf file it does not seem to take affect.
I notice that in the "Configure Desktop" tool it shows "Screen 1" as the only available screen for "Settings for Screen" selector. Yet my xorg.conf only identifies "Screen 0" perhaps that is just that the graphical tool starts counting at 1 instead of 0 but perhaps there's a mismatch here.
I also notice in my boot messages a warning (that for some reason I can not capture in dmesg) that looks like "compat5x.sh" not set properly in rc.conf using old kdmrc. But I've looked through the kdmrc and nothing jumps out at me as being related to this issue.
Here is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-67
VertRefresh 50-90
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "86C270-294 Savage/IX-MV"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
"The strength of the Constitution lies entirely in the determination of each citizen to defend it. Only if every single citizen feels duty bound to do his share in this defense are the constitutional rights secure." - Albert Einstein
Just installing KDE I get this resolution just fine, but when I try and add 1280x1024 "mode" in the xorg.conf file it does not seem to take affect.
I notice that in the "Configure Desktop" tool it shows "Screen 1" as the only available screen for "Settings for Screen" selector. Yet my xorg.conf only identifies "Screen 0" perhaps that is just that the graphical tool starts counting at 1 instead of 0 but perhaps there's a mismatch here.
I also notice in my boot messages a warning (that for some reason I can not capture in dmesg) that looks like "compat5x.sh" not set properly in rc.conf using old kdmrc. But I've looked through the kdmrc and nothing jumps out at me as being related to this issue.
Here is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-67
VertRefresh 50-90
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "86C270-294 Savage/IX-MV"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
___________________________________________________ . Account management: https://mail.kde.org/mailman/listinfo/kde. Archives: http://lists.kde.org/. More info: http://www.kde.org/faq.html.
