Re: [PATCH 7/7] drm/i915: Allow DP ports to set/readout infoframe state (WIP)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 13, 2016 at 06:58:19PM +0530, Sharma, Shashank wrote:
> Regards
> Shashank
> 
> On 6/3/2016 1:25 AM, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > The video DIP can be used with DP ports as well. So let's at least read
> > out the state, and disable all infoframes when disabling the port.
> > Otherwise we might get left with whatever the previous guy was doing.
> >
> > If we were totally paranaoid, I suppose we might consider doing this
> > for FDI too on DDI platforms. But that would require first decoupling
> > the infoframe code from intel_digital_port. So leave it be for now at
> > least.
> >
> > FIXME need to figure out how to handle the PSR VSC SDP usage before
> > doing this, as that might make the state checker unhappy.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/i915/intel_ddi.c | 13 ++++++++-----
> >   drivers/gpu/drm/i915/intel_dp.c  |  9 +++++++++
> >   2 files changed, 17 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index c5611e9d9b9c..6543feeb58f2 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -2157,7 +2157,6 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> >   	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> >   	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> >   	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> > -	struct intel_digital_port *intel_dig_port;
> >   	u32 temp, flags = 0;
> >
> >   	/* XXX: DSI transcoder paranoia */
> > @@ -2193,13 +2192,17 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> >   		break;
> >   	}
> >
> > -	switch (temp & TRANS_DDI_MODE_SELECT_MASK) {
> > -	case TRANS_DDI_MODE_SELECT_HDMI:
> > -		pipe_config->has_hdmi_sink = true;
> > -		intel_dig_port = enc_to_dig_port(&encoder->base);
> > +	if (encoder->type != INTEL_OUTPUT_ANALOG) {
> This will be true for INTEL_OUTPUT_UNUSED, UNKNOWN, eDP, and bunch of 
> more encoder types. Should we add a bit mask for valid encoder types here ?

We only need to care about FDI vs. not. If it's not FDI, then it'll be
a DDI encoder which has struct intel_digital_port as its base.

> > +		struct intel_digital_port *intel_dig_port =
> > +			enc_to_dig_port(&encoder->base);
> >
> >   		if (intel_dig_port->infoframe_enabled(&encoder->base, pipe_config))
> >   			pipe_config->has_infoframe = true;
> > +	}
> > +
> > +	switch (temp & TRANS_DDI_MODE_SELECT_MASK) {
> > +	case TRANS_DDI_MODE_SELECT_HDMI:
> > +		pipe_config->has_hdmi_sink = true;
> >   		/* fall through */
> >   	case TRANS_DDI_MODE_SELECT_DVI:
> >   		pipe_config->lane_count = 4;
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index a2d0ee363307..b43009ed1dab 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -2355,6 +2355,7 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
> >   				struct intel_crtc_state *pipe_config)
> >   {
> >   	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> > +	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> >   	u32 tmp, flags = 0;
> >   	struct drm_device *dev = encoder->base.dev;
> >   	struct drm_i915_private *dev_priv = dev->dev_private;
> > @@ -2395,6 +2396,10 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
> >   	    !IS_CHERRYVIEW(dev) && tmp & DP_COLOR_RANGE_16_235)
> >   		pipe_config->limited_color_range = true;
> >
> > +	if (intel_dig_port->infoframe_enabled &&
> > +	    intel_dig_port->infoframe_enabled(&encoder->base, pipe_config))
> > +		pipe_config->has_infoframe = true;
> > +
> >   	pipe_config->has_dp_encoder = true;
> >
> >   	pipe_config->lane_count =
> > @@ -3343,6 +3348,10 @@ intel_dp_link_down(struct intel_dp *intel_dp)
> >   		intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
> >   	}
> >
> > +	if (intel_dig_port->set_infoframes)
> > +		intel_dig_port->set_infoframes(&intel_dig_port->base.base,
> > +					       NULL, false);
> > +
> >   	msleep(intel_dp->panel_power_down_delay);
> >
> >   	intel_dp->DP = DP;
> >

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux