Re: [PATCH 10/21] drm/i915: Unify SKL cdclk init paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 19, 2016 at 06:43:32PM +0300, Imre Deak wrote:
> On pe, 2016-05-13 at 23:41 +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > 
> > Currently we initialize cdclk on SKL from two different places,
> > depending on whether it's during driver init or resume. Let's
> > unify it to happen from the same place always, and that place will be
> > the display core init function.
> > 
> > To do this we first run through the cdclk sanitation code, which will
> > first verify that the PLL is programmed correctly, after which we can
> > read out the current cdclk frequency, and once the cdclk is known we
> > verify that the cdclk "decimal" frequency is programmed correctly. If
> > any of these fail we will force a cdclk change, and to be safe we also
> > force the PLL to be turned off and on again. If the sanitation step
> > didn't notice anything amiss, we'll skip the cdclk programming which
> > will prevent cdclk reprogramming when the displays might be active.
> > 
> > We can also toss in a few WARNs about the register values into
> > skl_update_dpll0() since we now know that the PLL state should
> > always be sane when that function is called.
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c    | 40 +++++++++++++++++++++++++--------
> >  drivers/gpu/drm/i915/intel_dpll_mgr.c   | 11 ++-------
> >  drivers/gpu/drm/i915/intel_drv.h        |  1 -
> >  drivers/gpu/drm/i915/intel_runtime_pm.c |  5 +----
> >  4 files changed, 34 insertions(+), 23 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 493160682b2a..da903b718c11 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -5577,8 +5577,15 @@ skl_dpll0_update(struct drm_i915_private *dev_priv)
> >  		return;
> >  	}
> >  
> > +	WARN_ON((val & LCPLL_PLL_LOCK) == 0);
> > +
> >  	val = I915_READ(DPLL_CTRL1);
> >  
> > +	WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
> > +			DPLL_CTRL1_SSC(SKL_DPLL0) |
> > +			DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
> > +		DPLL_CTRL1_OVERRIDE(SKL_DPLL0));
> > +
> >  	switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
> >  	case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
> >  	case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
> > @@ -5748,6 +5755,8 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco)
> >  	intel_update_cdclk(dev);
> >  }
> >  
> > +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
> > +
> >  void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
> >  {
> >  	/* disable DBUF power */
> > @@ -5764,10 +5773,19 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
> >  
> >  void skl_init_cdclk(struct drm_i915_private *dev_priv)
> >  {
> > -	/* DPLL0 not enabled (happens on early BIOS versions) */
> > -	if (dev_priv->skl_vco_freq == 0) {
> > -		int cdclk, vco;
> > +	int cdclk, vco;
> > +
> > +	skl_sanitize_cdclk(dev_priv);
> >  
> > +	if (dev_priv->cdclk_freq != 0 && dev_priv->skl_vco_freq != 0) {
> > +		/*
> > +		 * Use the current vco as out initial
> 
> typo above.

Fixed while applying.

> 
> Looks ok:
> Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>
> 
> > +		 * guess as to what the preferred vco is.
> > +		 */
> > +		if (dev_priv->skl_preferred_vco_freq == 0)
> > +			skl_set_preferred_cdclk_vco(dev_priv,
> > +						    dev_priv->skl_vco_freq);
> > +	} else {
> >  		/* set CDCLK to the lowest frequency, Modeset follows */
> >  		vco = dev_priv->skl_preferred_vco_freq;
> >  		if (vco == 0)
> > @@ -5787,7 +5805,7 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
> >  		DRM_ERROR("DBuf power enable timeout\n");
> >  }
> >  
> > -int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> > +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> >  {
> >  	uint32_t cdctl, expected;
> >  
> > @@ -5810,6 +5828,8 @@ int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> >  	    DPLL_CTRL1_OVERRIDE(SKL_DPLL0))
> >  		goto sanitize;
> >  
> > +	intel_update_cdclk(dev_priv->dev);
> > +
> >  	/* DPLL okay; verify the cdclock
> >  	 *
> >  	 * Noticed in some instances that the freq selection is correct but
> > @@ -5821,13 +5841,15 @@ int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> >  		skl_cdclk_decimal(dev_priv->cdclk_freq);
> >  	if (cdctl == expected)
> >  		/* All well; nothing to sanitize */
> > -		return false;
> > -sanitize:
> > +		return;
> >  
> > -	skl_init_cdclk(dev_priv);
> > +sanitize:
> > +	DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
> >  
> > -	/* we did have to sanitize */
> > -	return true;
> > +	/* force cdclk programming */
> > +	dev_priv->cdclk_freq = 0;
> > +	/* force full PLL disable + enable */
> > +	dev_priv->skl_vco_freq = -1;
> >  }
> >  
> >  /* Adjust CDclk dividers to allow high res or save power if possible */
> > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > index 34ec149fde85..6b70e1eccb13 100644
> > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > @@ -1630,17 +1630,10 @@ static const struct intel_shared_dpll_funcs bxt_ddi_pll_funcs = {
> >  static void intel_ddi_pll_init(struct drm_device *dev)
> >  {
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> > -	uint32_t val = I915_READ(LCPLL_CTL);
> >  
> > -	if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
> > -		if (skl_sanitize_cdclk(dev_priv))
> > -			DRM_DEBUG_KMS("Sanitized cdclk programmed by pre-os\n");
> > +	if (INTEL_GEN(dev_priv) < 9) {
> > +		uint32_t val = I915_READ(LCPLL_CTL);
> >  
> > -		/* We'll want to keep using the current vco from now on */
> > -		if (dev_priv->skl_vco_freq != 0)
> > -			skl_set_preferred_cdclk_vco(dev_priv,
> > -						    dev_priv->skl_vco_freq);
> > -	} else if (!IS_BROXTON(dev_priv)) {
> >  		/*
> >  		 * The LCPLL register should be turned on by the BIOS. For now
> >  		 * let's just check its state and print errors in case
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 8f48a32e991b..319e52278d1f 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1279,7 +1279,6 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
> >  void bxt_disable_dc9(struct drm_i915_private *dev_priv);
> >  void gen9_enable_dc5(struct drm_i915_private *dev_priv);
> >  void skl_init_cdclk(struct drm_i915_private *dev_priv);
> > -int skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
> >  void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
> >  unsigned int skl_cdclk_get_vco(unsigned int freq);
> >  void skl_enable_dc6(struct drm_i915_private *dev_priv);
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index b69b935516fb..fefe22c3c163 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -2200,12 +2200,9 @@ static void skl_display_core_init(struct drm_i915_private *dev_priv,
> >  
> >  	mutex_unlock(&power_domains->lock);
> >  
> > -	if (!resume)
> > -		return;
> > -
> >  	skl_init_cdclk(dev_priv);
> >  
> > -	if (dev_priv->csr.dmc_payload)
> > +	if (resume && dev_priv->csr.dmc_payload)
> >  		intel_csr_load_program(dev_priv);
> >  }
> >  

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux