On pe, 2016-04-22 at 07:27 +0000, Patchwork wrote: > == Series Details == > > Series: drm/i915/bxt: Fix PHY init with partial BIOS config (rev2) > URL : https://patchwork.freedesktop.org/series/6010/ > State : failure > Thanks for the review I pushed the patchset to -dinq. Explanation for the failure below. > == Summary == > > Series 6010v2 drm/i915/bxt: Fix PHY init with partial BIOS config > http://patchwork.freedesktop.org/api/1.0/series/6010/revisions/2/mbox > / > > Test kms_flip: > Subgroup basic-flip-vs-wf_vblank: > fail -> PASS (ilk-hp8440p) UNSTABLE > Test kms_force_connector_basic: > Subgroup prune-stale-modes: > pass -> SKIP (ilk-hp8440p) Unrelated platform and I can't find the log for such SKIP results. > Test kms_pipe_crc_basic: > Subgroup read-crc-pipe-c: > pass -> FAIL (bdw-nuci7) Unrelated platform, I contribute it to the other pipe-crc errors where the HDMI connector vanishes in the middle of the test run, although here the failure mode is a bit different with timing out during the CRC read: IGT-Version: 1.14-gde4f3ab (x86_64) (Linux: 4.6.0-rc4-CI-Patchwork_1983+ x86_64) read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C Timed out: CRC reading Subtest read-crc-pipe-C: FAIL (5.091s) Subtest read-crc-pipe-C failed. **** DEBUG **** (kms_pipe_crc_basic:6663) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes) (kms_pipe_crc_basic:6663) INFO: read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: set_pipe(C) (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit { (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: Selecting pipe C (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: } (kms_pipe_crc_basic:6663) DEBUG: Clearing the fb with color (0.00,1.00,0.00) (kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x0, size=0) (kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: C.0: plane_set_fb(67) (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit { (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: Selecting pipe C (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: SetCrtc pipe C, fb 67, panning (0, 0), mode 1920x1080 (kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: } (kms_pipe_crc_basic:6663) igt-core-INFO: Timed out: CRC reading > > bdw- > nuci7 total:193 pass:180 dwarn:0 dfail:0 fail:1 skip:1 > 2 > bdw- > ultra total:193 pass:170 dwarn:0 dfail:0 fail:0 skip:2 > 3 > bsw-nuc- > 2 total:192 pass:152 dwarn:0 dfail:0 fail:0 skip:40 > byt- > nuc total:192 pass:154 dwarn:0 dfail:0 fail:0 skip:3 > 8 > hsw- > brixbox total:193 pass:169 dwarn:0 dfail:0 fail:0 skip:2 > 4 > hsw- > gt2 total:193 pass:174 dwarn:0 dfail:0 fail:0 skip:1 > 9 > ilk- > hp8440p total:193 pass:135 dwarn:0 dfail:0 fail:0 skip:5 > 8 > ivb- > t430s total:193 pass:165 dwarn:0 dfail:0 fail:0 skip:2 > 8 > skl-i7k- > 2 total:193 pass:168 dwarn:0 dfail:0 fail:0 skip:25 > skl- > nuci5 total:193 pass:182 dwarn:0 dfail:0 fail:0 skip:1 > 1 > snb- > dellxps total:193 pass:155 dwarn:0 dfail:0 fail:0 skip:3 > 8 > snb- > x220t total:193 pass:155 dwarn:0 dfail:0 fail:1 skip:3 > 7 > > Results at /archive/results/CI_IGT_test/Patchwork_1983/ > > d5b5101bd09a7b7e48b1cd78fe8f8a40b21d4deb drm-intel-nightly: 2016y- > 04m-21d-16h-37m-06s UTC integration manifest > 76092d6 drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already > enabled > 0ed1b74 drm/i915/bxt: Use PHY0 GRC value for HW state verification > _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
