On Tue, 2016-04-19 at 13:37 -0700, Jim Bride wrote:
> On Wed, Apr 13, 2016 at 08:47:50PM +0300, Ander Conselvan de Oliveira wrote:
> > The logic for setting signal levels is used for both HDMI and DP with
> > small variations. But it is similar enough to put behind a function
> > called from the encoders.
> >
> > Signed-off-by: Ander Conselvan de Oliveira <
> > ander.conselvan.de.oliveira@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 4 ++++
> > drivers/gpu/drm/i915/intel_dp.c | 43 ++++++++++++--------------------
> > ---
> > drivers/gpu/drm/i915/intel_dpio_phy.c | 26 +++++++++++++++++++++
> > drivers/gpu/drm/i915/intel_hdmi.c | 14 ++++--------
> > 4 files changed, 49 insertions(+), 38 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index 85c0610..f2481a2 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -3565,6 +3565,10 @@ void chv_phy_pre_encoder_enable(struct intel_encoder
> > *encoder);
> > void chv_phy_release_cl2_override(struct intel_encoder *encoder);
> > void chv_phy_post_disable(struct intel_encoder *encoder);
> >
> > +void vlv_set_phy_signal_level(struct intel_encoder *encoder,
> > + u32 demph_reg_value, u32 preemph_reg_value,
> > + u32 uniqtranscale_reg_value, u32 tx3_demph);
> > +
> > int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
> > int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index cdacd8b..3e42355 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -3009,16 +3009,10 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp,
> > uint8_t voltage_swing)
> >
> > static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
> > {
> > - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> > - struct intel_crtc *intel_crtc =
> > - to_intel_crtc(dport->base.base.crtc);
> > + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> > unsigned long demph_reg_value, preemph_reg_value,
> > uniqtranscale_reg_value;
> > uint8_t train_set = intel_dp->train_set[0];
> > - enum dpio_channel port = vlv_dport_to_channel(dport);
> > - int pipe = intel_crtc->pipe;
> >
> > switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
> > case DP_TRAIN_PRE_EMPH_LEVEL_0:
> > @@ -3093,16 +3087,8 @@ static uint32_t vlv_signal_levels(struct intel_dp
> > *intel_dp)
> > return 0;
> > }
> >
> > - mutex_lock(&dev_priv->sb_lock);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
> > - uniqtranscale_reg_value);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
> > - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> > - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port),
> > preemph_reg_value);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
> > - mutex_unlock(&dev_priv->sb_lock);
> > + vlv_set_phy_signal_level(encoder, demph_reg_value,
> > preemph_reg_value,
> > + uniqtranscale_reg_value, 0);
> >
> > return 0;
> > }
> > @@ -4285,17 +4271,6 @@ intel_dp_long_pulse(struct intel_connector
> > *intel_connector)
> > intel_dp->compliance_test_type = 0;
> > intel_dp->compliance_test_data = 0;
> >
> > - /*
> > - * If we were in MST mode, and device is not there,
> > - * get out of MST mode
> > - */
> > - if (intel_dp->is_mst) {
> > - DRM_DEBUG_KMS("MST device may have disappeared %d
> > vs %d\n",
> > - intel_dp->is_mst, intel_dp
> > ->mst_mgr.mst_state);
> > - intel_dp->is_mst = false;
> > - drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> > - intel_dp->is_mst);
> > - }
> > goto out;
> > }
> >
> > @@ -4355,6 +4330,18 @@ intel_dp_long_pulse(struct intel_connector
> > *intel_connector)
> > out:
> > if (status != connector_status_connected) {
> > intel_dp_unset_edid(intel_dp);
> > +
> > + /*
> > + * If we were in MST mode, and device is not there,
> > + * get out of MST mode
> > + */
> > + if (intel_dp->is_mst) {
> > + DRM_DEBUG_KMS("MST device may have disappeared %d
> > vs %d\n",
> > + intel_dp->is_mst, intel_dp
> > ->mst_mgr.mst_state);
> > + intel_dp->is_mst = false;
> > + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> > + intel_dp->is_mst);
> > + }
>
> The two hunks above seem unrelated to what the patch set is trying to do and
> would break DP MST again. ;)
I mixed things up when rebasing on top of your changes. I remember fixing that,
but alas, I didn't.
Ander
>
> Jim
>
>
> > }
> >
> > intel_display_power_put(to_i915(dev), power_domain);
> > diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c
> > b/drivers/gpu/drm/i915/intel_dpio_phy.c
> > index 2400554..d9e6482 100644
> > --- a/drivers/gpu/drm/i915/intel_dpio_phy.c
> > +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
> > @@ -369,3 +369,29 @@ void chv_phy_post_disable(struct intel_encoder
> > *encoder)
> > */
> > chv_phy_powergate_lanes(encoder, false, 0x0);
> > }
> > +
> > +void vlv_set_phy_signal_level(struct intel_encoder *encoder,
> > + u32 demph_reg_value, u32 preemph_reg_value,
> > + u32 uniqtranscale_reg_value, u32 tx3_demph)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> > + enum dpio_channel port = vlv_dport_to_channel(dport);
> > + int pipe = intel_crtc->pipe;
> > +
> > + mutex_lock(&dev_priv->sb_lock);
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
> > + uniqtranscale_reg_value);
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
> > +
> > + if (tx3_demph)
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port),
> > tx3_demph);
> > +
> > + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> > + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port),
> > preemph_reg_value);
> > + vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port),
> > DPIO_TX_OCALINIT_EN);
> > + mutex_unlock(&dev_priv->sb_lock);
> > +}
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> > b/drivers/gpu/drm/i915/intel_hdmi.c
> > index f424af5..9386772 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -1601,21 +1601,15 @@ static void vlv_hdmi_pre_enable(struct intel_encoder
> > *encoder)
> > val |= 0x001000c4;
> > vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
> >
> > - /* HDMI 1.0V-2dB */
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), 0x2b245f5f);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), 0x5578b83a);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0c782040);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), 0x2b247878);
> > - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
> > - vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
> > - vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port),
> > DPIO_TX_OCALINIT_EN);
> > -
> > /* Program lane clock */
> > vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
> > vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
> > mutex_unlock(&dev_priv->sb_lock);
> >
> > + /* HDMI 1.0V-2dB */
> > + vlv_set_phy_signal_level(encoder, 0x2b245f5f, 0x00002000,
> > 0x5578b83a,
> > + 0x2b247878);
> > +
> > intel_hdmi->set_infoframes(&encoder->base,
> > intel_crtc->config->has_hdmi_sink,
> > adjusted_mode);
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
