On Wed, Apr 13, 2016 at 04:02:17PM -0000, Patchwork wrote: > == Series Details == > > Series: drm/i915: Rest of my DSI and DPLL stuff > URL : https://patchwork.freedesktop.org/series/5610/ > State : failure > > == Summary == > > Series 5610v1 drm/i915: Rest of my DSI and DPLL stuff > http://patchwork.freedesktop.org/api/1.0/series/5610/revisions/1/mbox/ > > Test drv_hangman: > Subgroup error-state-basic: > pass -> DMESG-WARN (ilk-hp8440p) > Test gem_busy: > Subgroup basic-bsd: > pass -> SKIP (ilk-hp8440p) > Subgroup basic-render: > pass -> SKIP (ilk-hp8440p) > Test gem_cpu_reloc: > Subgroup basic: > pass -> FAIL (ilk-hp8440p) ... [ 265.316531] drm/i915: Resetting chip after gpu hang [ 265.316585] [drm:i915_reset [i915]] *ERROR* Failed to reset chip: -110 Looks like the GPU died for some reason. > Test kms_force_connector_basic: > Subgroup prune-stale-modes: > pass -> SKIP (ivb-t430s) No clue what happened here. The change isn't visible in the results visualization page, nor can I see this subtest even being run in the dmesg for Patchwork_1881. The dmesg ends at gtt-blt, but based on the json there were a ton of tests run after that. In fact the json and dmesg seem totally out of sync. Tomi, any idea what's going on here? > Test kms_pipe_crc_basic: > Subgroup hang-read-crc-pipe-a: > pass -> FAIL (ilk-hp8440p) > Subgroup hang-read-crc-pipe-b: > pass -> FAIL (ilk-hp8440p) > Subgroup hang-read-crc-pipe-c: > skip -> FAIL (ilk-hp8440p) > Subgroup suspend-read-crc-pipe-a: > pass -> DMESG-FAIL (ilk-hp8440p) > Subgroup suspend-read-crc-pipe-b: > pass -> DMESG-FAIL (ilk-hp8440p) > > bdw-nuci7 total:203 pass:191 dwarn:0 dfail:0 fail:0 skip:12 > bsw-nuc-2 total:202 pass:163 dwarn:0 dfail:0 fail:0 skip:39 > byt-nuc total:202 pass:164 dwarn:0 dfail:0 fail:0 skip:38 > hsw-brixbox total:203 pass:179 dwarn:0 dfail:0 fail:0 skip:24 > hsw-gt2 total:203 pass:184 dwarn:0 dfail:0 fail:0 skip:19 > ilk-hp8440p total:203 pass:105 dwarn:1 dfail:2 fail:22 skip:73 > ivb-t430s total:203 pass:174 dwarn:0 dfail:0 fail:0 skip:29 > skl-i7k-2 total:203 pass:178 dwarn:0 dfail:0 fail:0 skip:25 > skl-nuci5 total:203 pass:192 dwarn:0 dfail:0 fail:0 skip:11 > snb-dellxps total:203 pass:165 dwarn:0 dfail:0 fail:0 skip:38 > snb-x220t total:203 pass:165 dwarn:0 dfail:0 fail:1 skip:37 > BOOT FAILED for bdw-ultra > > Results at /archive/results/CI_IGT_test/Patchwork_1881/ > > 631ffd2f45bb43964f729e8661532fb115f5eeec drm-intel-nightly: 2016y-04m-13d-13h-00m-18s UTC integration manifest > cb48288 drm/i915: Reject 'Center' scaling mode for eDP/DSI on GMCH platforms > 9498c94 drm/i915: Hook up pfit for DSI > b94623e drm/i915: Eliminate {vlv, bxt}_configure_dsi_pll() > 546b2ef drm/i915: Compute DSI PLL parameters during .compute_config() > ae0326a drm/i915: Setup DPLL/DPLLMD for DSI too on VLV/CHV -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
