From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> PIPESTAT registers live in the display power well on VLV/CHV, so we shouldn't access them when things are powered down. Let's check whether the display interrupts are on or off before accessing the PIPESTAT registers. Another option would be to read the PIPESTAT registers only when the IIR register indicates that there's a pending pipe event. But that would mean we might miss even more underrun reports than we do now, because the underrun status bit lives in PIPESTAT but doesn't actually generate an interrupt. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93738 Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> Tested-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_irq.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 25a89373df63..d56c261ad867 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1651,6 +1651,12 @@ static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir) int pipe; spin_lock(&dev_priv->irq_lock); + + if (!dev_priv->display_irqs_enabled) { + spin_unlock(&dev_priv->irq_lock); + return; + } + for_each_pipe(dev_priv, pipe) { i915_reg_t reg; u32 mask, iir_bit = 0; -- 2.4.10 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
