It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.
This patch applies to TV.
V2:
- removed computation for max pixel clock
V3:
- cleanup by removing unnecessary lines
V4:
- max_pixclk variable renamed as max_dotclk
Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_tv.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 948cbff..eeb4e3c 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -897,6 +897,10 @@ intel_tv_mode_valid(struct drm_connector *connector,
{
struct intel_tv *intel_tv = intel_attached_tv(connector);
const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+ int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
+
+ if (mode->clock > max_dotclk)
+ return MODE_CLOCK_HIGH;
/* Ensure TV refresh is close to desired refresh */
if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
