On Mon, Dec 21, 2015 at 03:11:02PM +0200, Jani Nikula wrote:
> From: vkorjani <vikas.korjani@xxxxxxxxx>
>
> New sequence element for i2c is been added in the
> mipi sequence block of the VBT. This patch parses
> and executes the i2c sequence.
>
> v2: Add i2c_put_adapter call(Jani), rebase
>
> v3: corrected the retry loop(Jani), rebase
>
> v4 by Jani:
> - don't put the adapter if get fails
> - print an error message if all retries exhausted
> - use a for loop
> - fix warnings for unused variables
>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: vkorjani <vikas.korjani@xxxxxxxxx>
> Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 58 ++++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index ba5355506590..8fcfb0f63dc1 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -31,6 +31,7 @@
> #include <drm/drm_panel.h>
> #include <linux/slab.h>
> #include <video/mipi_display.h>
> +#include <linux/i2c.h>
> #include <asm/intel-mid.h>
> #include <video/mipi_display.h>
> #include "i915_drv.h"
> @@ -104,6 +105,62 @@ static struct gpio_table gtable[] = {
> { GPIO_NC_11_PCONF0, GPIO_NC_11_PAD, 0}
> };
>
> +static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
> +{
> + struct i2c_adapter *adapter;
> + int ret, i;
> + u8 reg_offset, payload_size;
> + struct i2c_msg msg;
> + u8 *transmit_buffer;
> + u8 flag, bus_number;
> + u16 slave_add;
> +
> + flag = *data++;
> + data++; /* index, unused */
> + bus_number = *data++;
> + slave_add = *(u16 *)(data);
> + data += 2;
> + reg_offset = *data++;
> + payload_size = *data++;
> +
> + adapter = i2c_get_adapter(bus_number);
I'm trying to find who is responsible for registering i2c busses with
these magic bus numbers. So far I can't see anything that would be doing
it.
> + if (!adapter) {
> + DRM_ERROR("i2c_get_adapter(%u)\n", bus_number);
> + goto out;
> + }
> +
> + transmit_buffer = kmalloc(1 + payload_size, GFP_TEMPORARY);
> + if (!transmit_buffer)
> + goto out_put;
> +
> + transmit_buffer[0] = reg_offset;
> + memcpy(&transmit_buffer[1], data, payload_size);
> +
> + msg.addr = slave_add;
> + msg.flags = 0;
> + msg.len = payload_size + 1;
> + msg.buf = &transmit_buffer[0];
> +
> + for (i = 0; i < 6; i++) {
> + ret = i2c_transfer(adapter, &msg, 1);
> + if (ret == 1) {
> + goto out_free;
> + } else if (ret == -EAGAIN) {
> + usleep_range(1000, 2500);
> + } else {
> + break;
> + }
> + }
> +
> + DRM_ERROR("i2c transfer failed: %d\n", ret);
> +out_free:
> + kfree(transmit_buffer);
> +out_put:
> + i2c_put_adapter(adapter);
> +out:
> + return data + payload_size;
> +}
> +
> static inline enum port intel_dsi_seq_port_to_port(u8 port)
> {
> return port ? PORT_C : PORT_A;
> @@ -235,6 +292,7 @@ static const fn_mipi_elem_exec exec_elem[] = {
> [MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
> [MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
> [MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
> + [MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
> };
>
> /*
> --
> 2.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
