From: vkorjani <vikas.korjani@xxxxxxxxx>
New sequence element for i2c is been added in the
mipi sequence block of the VBT. This patch parses
and executes the i2c sequence.
v2: Add i2c_put_adapter call(Jani), rebase
v3: corrected the retry loop(Jani), rebase
v4 by Jani:
- don't put the adapter if get fails
- print an error message if all retries exhausted
- use a for loop
- fix warnings for unused variables
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: vkorjani <vikas.korjani@xxxxxxxxx>
Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 58 ++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index ba5355506590..8fcfb0f63dc1 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -31,6 +31,7 @@
#include <drm/drm_panel.h>
#include <linux/slab.h>
#include <video/mipi_display.h>
+#include <linux/i2c.h>
#include <asm/intel-mid.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
@@ -104,6 +105,62 @@ static struct gpio_table gtable[] = {
{ GPIO_NC_11_PCONF0, GPIO_NC_11_PAD, 0}
};
+static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
+{
+ struct i2c_adapter *adapter;
+ int ret, i;
+ u8 reg_offset, payload_size;
+ struct i2c_msg msg;
+ u8 *transmit_buffer;
+ u8 flag, bus_number;
+ u16 slave_add;
+
+ flag = *data++;
+ data++; /* index, unused */
+ bus_number = *data++;
+ slave_add = *(u16 *)(data);
+ data += 2;
+ reg_offset = *data++;
+ payload_size = *data++;
+
+ adapter = i2c_get_adapter(bus_number);
+ if (!adapter) {
+ DRM_ERROR("i2c_get_adapter(%u)\n", bus_number);
+ goto out;
+ }
+
+ transmit_buffer = kmalloc(1 + payload_size, GFP_TEMPORARY);
+ if (!transmit_buffer)
+ goto out_put;
+
+ transmit_buffer[0] = reg_offset;
+ memcpy(&transmit_buffer[1], data, payload_size);
+
+ msg.addr = slave_add;
+ msg.flags = 0;
+ msg.len = payload_size + 1;
+ msg.buf = &transmit_buffer[0];
+
+ for (i = 0; i < 6; i++) {
+ ret = i2c_transfer(adapter, &msg, 1);
+ if (ret == 1) {
+ goto out_free;
+ } else if (ret == -EAGAIN) {
+ usleep_range(1000, 2500);
+ } else {
+ break;
+ }
+ }
+
+ DRM_ERROR("i2c transfer failed: %d\n", ret);
+out_free:
+ kfree(transmit_buffer);
+out_put:
+ i2c_put_adapter(adapter);
+out:
+ return data + payload_size;
+}
+
static inline enum port intel_dsi_seq_port_to_port(u8 port)
{
return port ? PORT_C : PORT_A;
@@ -235,6 +292,7 @@ static const fn_mipi_elem_exec exec_elem[] = {
[MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
[MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
[MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
+ [MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
};
/*
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
