On Fri, Dec 18, 2015 at 03:58:52PM -0800, Radhakrishna Sripada wrote:
> Original value of 32 blocks is not sufficient when using cursor size of
> 256x256 causing FIFO underruns when the reworked wm
> caluclations in
>
> commit 024c9045221fe45482863c47c4b4c47d37f97cbf
> Author: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Date: Thu Sep 24 15:53:11 2015 -0700
>
> drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4)
>
> are used. Increasing the number of blocks to 52 to make cursor plane tolerate
> SAGV block time for the maximum possible cursor size.
>
> v2: Included Matt's suggestion, bumping up the no of blocks in multi-pipe case
> to 16.
>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> Signed-off-by: Kalyan Kondapally <kalyan.kondapally@xxxxxxxxx>
Can you try my patch "drm/i915/skl: Use proper plane dimensions for DDB
and WM calculations" first and see if it solves your problems? It's
possible that your problems were caused by my fumble that I'm fixing
with that patch; if that patch fixes the problem, then we may not need
to alter the cursor's fixed allocation after all.
Of course as we noted, there are a handful of new workarounds in the
bspec (SAGV disabling, system memory bandwidth checking, etc.) that we
still don't have in our driver yet, so if any of those are the true root
cause, then your patch here is probably a reasonable short-term fix
until we can take action on the new workarounds. In that case, you can
consider this patch
Acknowledged-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Unfortunately I only have a BXT which doesn't exhibit the problems
you're seeing, so I can't actually test this out myself.
Matt
> ---
> drivers/gpu/drm/i915/intel_pm.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index d385d99..c5ba4e5 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2802,9 +2802,9 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
> static unsigned int skl_cursor_allocation(const struct intel_wm_config *config)
> {
> if (config->num_pipes_active == 1)
> - return 32;
> + return 52;
>
> - return 8;
> + return 16;
> }
>
> static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
> --
> 1.9.1
>
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
