[PATCH 00/22] DP refactoring v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Here is an updated version of the DP patches I have pending. I updated
the first patch with the comments from Sivakumar, and that required a
rebase, so I'm sending the patches out again. Other than that, the order
of the first few patches changed slightly so that there is no need to
create the new intel_dp_update_signal_levels() function.

I also included the patches of the second series I sent recently, that
moves the code for detemining maximum voltage swing and pre emphasis
levels to a new file.

Thanks,
Ander

Ander Conselvan de Oliveira (22):
  drm/i915: Don't pass *DP around to link training functions
  drm/i915: Split write of pattern to DP reg from
    intel_dp_set_link_train
  drm/i915 Call get_adjust_train() from clock recovery and channel eq
  drm/i915: Move register write into intel_dp_set_signal_levels()
  drm/i915: Move generic link training code to a separate file
  drm/i915: Create intel_dp->prepare_link_retrain() hook
  drm/i915: Make intel_dp_source_supports_hbr2() take an intel_dp
    pointer
  drm/i915: Move link training setup code to separate functions (v2)
  drm/i915: Move test for max voltage on all lanes to separate function
  drm/i915: Add function for getting the current link training voltage
  drm/i915: Split full retries loop out of clock recovery code (v2)
  drm/i915: Make the link training test for same voltage smaller
  drm/i915: Move the voltage changed check into intel_get_adjust_train()
  drm/i915: Add missing newline to link training debug message
  drm/i915: Split setting of vswing and pre_emph levels to separate file
  drm/i915: Introduce struct intel_dp_signal_levels
  drm/i915: Use struct intel_dp_signal_levels for eDP on SNB and IVB
  drm/i915: Use struct intel_dp_signal_levels for VLV
  drm/i915: Use struct intel_dp_signal_levels for CHV
  drm/i915: Use struct intel_dp_signal_levels for DDI platforms
  drm/i915: Remove old functions for maximum DP vswing and pre-emph
    levels
  drm/i915: Move ddi_signal_levels() to intel_dp_signal_levels.c

 drivers/gpu/drm/i915/Makefile                 |   2 +
 drivers/gpu/drm/i915/intel_ddi.c              |  86 +--
 drivers/gpu/drm/i915/intel_dp.c               | 864 +-------------------------
 drivers/gpu/drm/i915/intel_dp_link_training.c | 349 +++++++++++
 drivers/gpu/drm/i915/intel_dp_signal_levels.c | 689 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h              |  46 +-
 6 files changed, 1117 insertions(+), 919 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_dp_link_training.c
 create mode 100644 drivers/gpu/drm/i915/intel_dp_signal_levels.c

-- 
2.4.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux