Re: [PATCH 6/6] drm/i915/bxt: Fix irq_port for eDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nak: I don't believe we need this... Actually I believe we need the opposite... we need to enable HPD on port A for eDP errors handling...




On Fri, Sep 4, 2015 at 6:38 AM Sonika Jindal <sonika.jindal@xxxxxxxxx> wrote:
From: Durgadoss R <durgadoss.r@xxxxxxxxx>

Currently, HDMI hotplug with eDP as local panel is failing
because the HDMI hpd is detected as a long hpd for eDP; and is
thus rightfully ignored. But, it should really be handled as
an interrupt on port B for HDMI (due to BXT A1 platform having
HPD pins A and B swapped). This patch sets the irq_port[PORT_A]
to NULL in case eDP is on port A so that irq handler does not
treat it as a 'dig_port' interrupt.

Signed-off-by: Durgadoss R <durgadoss.r@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_ddi.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4823184..fec51df 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3218,15 +3218,20 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
                        goto err;

                intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
+               dev_priv->hotplug.irq_port[port] = intel_dig_port;
                /*
                 * On BXT A0/A1, sw needs to activate DDIA HPD logic and
                 * interrupts to check the external panel connection.
+                * If eDP is connected on port A, set irq_port to NULL
+                * so that we do not assume an interrupt here as a
+                * 'dig_port' interrupt.
                 */
-               if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0)
-                                        && port == PORT_B)
-                       dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
-               else
-                       dev_priv->hotplug.irq_port[port] = intel_dig_port;
+               if (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) {
+                       if (port == PORT_B)
+                               dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
+                       else if (intel_encoder->type == INTEL_OUTPUT_EDP)
+                               dev_priv->hotplug.irq_port[port] = NULL;
+               }
        }

        /* In theory we don't need the encoder->type check, but leave it just in
--
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux