From: Durgadoss R <durgadoss.r@xxxxxxxxx>
Currently, HDMI hotplug with eDP as local panel is failing
because the HDMI hpd is detected as a long hpd for eDP; and is
thus rightfully ignored. But, it should really be handled as
an interrupt on port B for HDMI (due to BXT A1 platform having
HPD pins A and B swapped). This patch sets the irq_port[PORT_A]
to NULL in case eDP is on port A so that irq handler does not
treat it as a 'dig_port' interrupt.
Signed-off-by: Durgadoss R <durgadoss.r@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4823184..fec51df 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3218,15 +3218,20 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
goto err;
intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
+ dev_priv->hotplug.irq_port[port] = intel_dig_port;
/*
* On BXT A0/A1, sw needs to activate DDIA HPD logic and
* interrupts to check the external panel connection.
+ * If eDP is connected on port A, set irq_port to NULL
+ * so that we do not assume an interrupt here as a
+ * 'dig_port' interrupt.
*/
- if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0)
- && port == PORT_B)
- dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
- else
- dev_priv->hotplug.irq_port[port] = intel_dig_port;
+ if (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) {
+ if (port == PORT_B)
+ dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
+ else if (intel_encoder->type == INTEL_OUTPUT_EDP)
+ dev_priv->hotplug.irq_port[port] = NULL;
+ }
}
/* In theory we don't need the encoder->type check, but leave it just in
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
