From: Libin Yang <libin.yang@xxxxxxxxx>
When modeset occurs and the TMDS frequency is set to some
speical values, the N/CTS need to be set manually if audio
is playing.
Signed-off-by: Libin Yang <libin.yang@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
drivers/gpu/drm/i915/intel_audio.c | 40 +++++++++++++++++++++++++++++++++++++-
2 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ae7fa3e..5bdee36 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7058,6 +7058,8 @@ enum skl_disp_power_wells {
_HSW_AUD_MISC_CTRL_A, \
_HSW_AUD_MISC_CTRL_B)
+#define HSW_AUD_PIPE_CONN_SEL_CTRL 0x650ac
+
#define _HSW_AUD_DIP_ELD_CTRL_ST_A 0x650b4
#define _HSW_AUD_DIP_ELD_CTRL_ST_B 0x651b4
#define HSW_AUD_DIP_ELD_CTRL(pipe) _PIPE(pipe, \
@@ -7072,6 +7074,12 @@ enum skl_disp_power_wells {
_HSW_AUD_DIG_CNVT_2)
#define DIP_PORT_SEL_MASK 0x3
+#define _HSW_AUD_STR_DESC_1 0x65084
+#define _HSW_AUD_STR_DESC_2 0x65184
+#define AUD_STR_DESC(pipe) _PIPE(pipe, \
+ _HSW_AUD_STR_DESC_1, \
+ _HSW_AUD_STR_DESC_2)
+
#define _HSW_AUD_EDID_DATA_A 0x65050
#define _HSW_AUD_EDID_DATA_B 0x65150
#define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index a021720..acdb68c 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -140,6 +140,27 @@ static bool audio_rate_need_prog(struct intel_crtc *crtc,
return false;
}
+static int audio_config_get_rate(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ uint32_t tmp;
+ int cvt_idx;
+ int base_rate, mul, div, rate;
+
+ tmp = I915_READ(HSW_AUD_PIPE_CONN_SEL_CTRL);
+ cvt_idx = (tmp >> (pipe * 8)) & 0xff;
+ tmp = I915_READ(AUD_STR_DESC(cvt_idx));
+ base_rate = tmp & (1 << 14);
+ if (base_rate == 0)
+ rate = 48000;
+ else
+ rate = 44100;
+ mul = (tmp & (0x7 << 11)) + 1;
+ div = (tmp & (0x7 << 8)) + 1;
+ rate = rate * mul / div;
+ return rate;
+}
+
static bool intel_eld_uptodate(struct drm_connector *connector,
int reg_eldv, uint32_t bits_eldv,
int reg_elda, uint32_t bits_elda,
@@ -265,6 +286,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
const uint8_t *eld = connector->eld;
uint32_t tmp;
int len, i;
+ int n_low, n_up, n;
+ int rate;
DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
pipe_name(pipe), drm_eld_size(eld));
@@ -302,12 +325,27 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
/* Enable timestamps */
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
- tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(mode);
+
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ if (audio_rate_need_prog(intel_crtc, mode)) {
+ rate = audio_config_get_rate(dev_priv, pipe);
+ n = audio_config_get_n(mode, rate);
+ if (n != 0) {
+ n_low = n & 0xfff;
+ n_up = (n >> 12) & 0xff;
+ tmp &= ~(AUD_CONFIG_UPPER_N_MASK |
+ AUD_CONFIG_LOWER_N_MASK);
+ tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
+ (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
+ AUD_CONFIG_N_PROG_ENABLE);
+ }
+ }
+
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
mutex_unlock(&dev_priv->av_mutex);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
