From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> The BIOS sometimes likes to enable pipes w/o any ports, at least on older machines. Currently we fail to assign anything sensible to crtc->hwmode.crtc_clock which leads to complaints from the vblank code. Deal with active pipes w/o ports and assign something sensible to crtc_clock in i9xx_get_pipe_config(). The encoder .get_config() will override this if the port is enabled. Gets rid of rest of these on my gen4: [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 24: Can't calculate constants, dotclock = 0! [drm:i915_get_vblank_timestamp] crtc 1 is disabled v2: Fill out crtc_clock already in i9xx_get_pipe_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dde8597..9e92915 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8107,6 +8107,14 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, else i9xx_crtc_clock_get(crtc, pipe_config); + /* + * Normally the dotclock is filled in by the encoder .get_config() + * but in case the pipe is enabled w/o any ports we need a sane + * default. + */ + pipe_config->base.adjusted_mode.crtc_clock = + pipe_config->port_clock / pipe_config->pixel_multiplier; + return true; } -- 2.4.6 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
